Paul Neuhaus E0040017-03 Radio Remote Control Instruction Manual
- June 3, 2024
- Paul Neuhaus
Table of Contents
Paul Neuhaus E0040017-03 Radio Remote Control Instruction
Radio remote control for CCT ceiling lights
Operating Instructions
Instructions for your remote control
- ALL ON : Switch on all lights/groups
- ALL OFF: Switch off all lights/groups
- GROUP 1-4: Switch for the respective group
- UPPER BUTTON: Increase the brightness
- LOWER BUTTON: Reduce the brightness
- LEFT BUTTON: Reduce the colour temperature
- RIGHT BUTTON : Increase the colour temperature
Instructions for use
If your light is not assigned to the enclosed remote control, assign the remote control to the light as follows:
-
a) Assigning and grouping the remote control to the light
Switch the light off via the wall switch before assigning it. Press and hold the ON button for the respective group, then switch on the light via the wall switch. Within 3 seconds, the light blinks 2x. Let go of the ON button of the respective group. The light is now assigned to this group. After a light has been assigned to a group, it can be controlled using the remote control.
!!! A remote control can control an unlimited number of lights. A light can only be operated by four remote controls!!! -
b) Controlling a single group
In order to control a single group of lights, press the ON button of the respective group and this group of lights can now be controlled by the remote control. -
c) Controlling all groups
In order to control all the groups of lights, press the ALL ON button and all the lights will be controlled by the remote control. -
d) Removing the light from a remote control
Switch the light off via the wall switch before resetting. Press and hold the ON button for the respective group, then switch the light on via the wall switch. Within 3 seconds, the light blinks 2x. Let go of the ON button of the respective group. The light is now no longer assigned to this group.
Other functions
-
By pressing the Upper Button for a short time, you can increase the brightness of the light in steps.
-
By pressing the Upper Button for a longer time, you can increase the brightness of the light continuously.
-
By pressing the Lower Button for a short time, you can reduce the brightness of the light in steps.
-
By pressing the Lower Button for a longer time, you can reduce the brightness of the light continuously
-
By pressing the left Button for a short time, you can reduce the color temperature of the light in steps.
-
By pressing the left Button for a longer time, you can reduce the color temperature of the light continuously.
-
By pressing the Right Button for a short time, you can increase the color temperature of the light in steps.
-
By pressing the Right Button for a longer time, you can increase the color temperature of the light continuously.
Memory function
This function is applicable to all the buttons.
Technical data
Description| Operating data| Remarks|
---|---|---|---
Supply voltage| 3,3V| Two batteries (AAA)|
Transmission frequency| 2426MHz-2474
MHz
| |
Modulation process| GFSK| |
Transmitting power| 6 dBm| |
No-load current| Max 5μA| |
Operating current| Max 9mA| |
Range of the remote control| 10 m| |
Dimensions| 110mm x 52mm x 20mm| |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>