Advwin 2 in 1 Twin Tub Compact Electric Clothes Washer User Manual
- June 14, 2024
- advwin
Table of Contents
Advwin 2 in 1 Twin Tub Compact Electric Clothes Washer User Manual
Electrical Principle
| Washing| Spinning
---|---|---
Rated voltage| 240 V| 240 V
Rated frequency| 50Hz| 50Hz
Rated energy consumption power| 240W| 120W
WARNING -1
To reduce the risk of electric shock, disconnect the appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance form the power supply
WARNING-2
Do not use this appliance to wash clothes soaked, spotted or washed in gasoline, dry cleaning solvents or any other exposure or flammable substances that could ignite and explode.
Introduction
Thank you for purchasing this Semi Auto Washing Machine. The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and this ensures that your semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as compared to other general twin-tub washing machines.
Through the integration of new technology, this washer with large wave pulsator and new water flow, will not only produce less twisting of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water flow are also made available to save time, labor and water usage.
We trust that you will find your purchase of this beautifully designed and dignified-looking semi auto washing machine to your satisfaction.
Technology parameter and specifications
Model | Capacity | Input power | Power source |
---|---|---|---|
wash | spin | wash | dry |
t)N3V1020885/0 | 3 .6 kg | 2kg | 240W |
150100500 (XPB46-1298S) | 4.6kg | 3kg | 240W |
()Form6102098s) | 4.6kg | 3kg | 240W |
Troubleshooting
Problem | Reason | Solution |
---|---|---|
The pulsator is too slow | Power cut or switch off | Switch on the power |
Transmission belt left off | Assemble the transmission belt | |
Belt pulley has become loose | Tighten the belt | |
Pulsator is blocked | Remove the block | |
The pulsatordoes not rotate | Belt is loose | Tighten the belt or renew it |
The clothes in the spin dry tub loosened | Tighten the belt and the screw | |
Abnormal noise and vibration | The clothes in the spin | |
dry tub is unbalanced | Replace the clothes in the tub | |
There is something jammed between the pulsator and the wash tub | Remove the |
jammed object(s).
Water leaksfrom the wash tub| Wash tub was not connected tightly to the hose|
Reconnect tighten the hoseose
Spin-drybasket does not rotate| The slight switch is in loose contact| Adjust
the contactor of the switch
The fixed screw of spin dry basket orshaft coupling is loose| Tighten the
screw
The shaft of spin dry basket is twined by the textile| Remove the textile
Brake dragline is loose| Tighten the dragline
The spin tub does not drain| Something had dropped into the space between spin
tub and spin dry basket| Remove the object
Attention. When the problem can not be resolved, please contact the Service Center.
Maintenance
After use, pull out the plug to prevent accidents.
When cleaning the washing machine use a soft cloth, this will prevent scratching of the surface of the cabinet.
Do not put the washing machine outdoors or in damp areas such as the bathroom.
Do not put heavy objects on top of the washing machine.
Do not place the washing machine near to heat-generating items such as gas cookers.
Structure and parts of product
- spin cap
- spin tub
- spin cover
- water inlet
- Control panel.
- pulsator
- wash cover
- cabinet
- Bottom
- wash timer switch
- wash & drain selector switch
- spin timer switch -3-
- drain hose
- power wire
- back cover
Washing Instructions
- Preparation
- The machine should be placed on the flat ground
- The plug seat should have safety ground connection.
- Lay down the overflow hose.
- Use the water inlet hose to connect the water tap on the water inlet. 5. Adjust the water level based on the type of clothing material and its weight.
- Turn on the power
Washing
- Set the ‘wash & drain selector switch” according to the material type and weight of clothes.
- Set the “wash& drain selector switch” to the wash position.
- Set the “wash timer” and place the clothes into the tub, adjust the water level to the proper position and put in the proper amount of detergent into the wash tub.
- Set the “wash timer” and washing machine will start to wash. 3. After wash, set the “wash & drain “selector switch to the drain position to the start draining off water.
Spinning
- After spinning, set the water inlet hose to the water inlet of the spin tub position for 20 30seconds
- According to the “spin timer” process, spinning the clothes for Imin-5min, repeat once or twice.
Rinsing
- After spinning, the spin tub will stop. Open the spin cover and from the spin tub transfer the clothes to the wash tub to prepare for rinsing
- Repeat the washing process but do not add any detergent
Attention Points
For your own safety, ensure that the ground connection is correct.
Never put your hands into the spin tub whilst it is working.
Never wash textiles which contain volatile materials to avoid machine damage or water blockage due to stains
The timer should always be turned clock wise
When abnormal sounds/movements occur during operation, stop the washing
machine as soon as possible and check. (Please refer to troubleshooting,
Page7.)
When washing, the water temperature should be below 60°C, Otherwise, the
plastic components may be deformed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>