Shenzhen Towo Technology TOWOSMART Smart Camera User Manual

Shenzhen Towo Technology TOWOSMART Smart Camera

Product Introduction

Packing list

• Smart Camera x 1
• Manual x 1
• USB Power Cord x 1
• Power Adapter x 1
• Screw Accessories Package x 1

S mart Camera

Manual

|

Screw Accessories Package

USB Power Cord

|

Power Adapter

Specifications

Getting Started

Reset Button: Press a small object into the “Reset” hole on the back of the device and hold for 5 seconds. A voice prompt will state “Reset camera successfully” when properly completed.

It Is recommended that you Insert an 8-128 GB high-speed Micro SD card. Otherwise, the camera will not be able to store, view old video, or support important functions, such as firmware upgrading.

Install the Smart Life App

Download the Smart Life App: Access the Smart Life app from your Google Play/ Apple App Store or scan the QR code below to download and install Register and Login: Open the Smart Life App and follow the prompts to register and login.

Add The Device

Please make sure that there is an available Wi-Fi network and that you are connected to the Internet.
Find the USB port on the bottom of the smart camera end Insert the power cord to turn on the device.
Then go to the Smart Lile app home page and click “ADD DEVICES” on the main screen. Choose nSecurity cameran.
Select the “QR Code” in the upper right corner of the screen. Click confirm and proceed according to the prompts on your mobile phone.

Video Browsing in the Smart Life App

1. Preview Mode
2. Voice Swit
3. Full Scre
4. More Settin
5. SQ
6. Floating Window
7. Play / Paus
8. History file (Make sure insert Micro SD card)

App Interface

1. Click the to enable the microphone function. By holding the speaker button down, you can communicate with the people/pets that you see on screen with the camera. Click  when the listening functionality is on and you can hear audio from the camera end.
2. Click or to start recording or take a screenshot (files recorded in mobile phone).
3. Click to view the motion sensor and alerts settings. (Three sensitivity options: Low, Medium, High.)
4. Click to view in full-screen mode.
5. Image-quality adjustment: Two modes, SD and HD).
6. Recording and playback: You can watch the recorded videos on the local disc and SD card.
7. Alarm notification and triggered screenshot can be viewed in the message center.

More Settings

1. Click to view more settings.
2. Device Sharing: Share the device to multiple users with the Smart Life app (only the admin account is allowed to change the settings).
3. Device info: IP address, device ID, timezone, and Wi-Fi signal (6.2).
4. Basic Function Settings: set flip and time stamp.
5. SD card settings: Check the status of the SD card and set recording and alarm mode.

Important Reminders

• Avoid contact with sharp objects,
• Avoid placing on furniture or places where it might fall.
• Avoid tangling the wires, and kaap them tucked away from the camera to avoid tripping hazards and pinching.
• Ensure that the camera is within coverage range of the wireless Wi-Fi signals.
• When switching to a new network environment: Reset the camera via the reset hole on the back, by inserting a small object and holding the reset button for about 5 seconds. A voice prompt will state “Reset camera successfully”. Then you may connect to the new network.

FCC Notice

This device complies with part 15 of the FCC Rules. Operationi ssubject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including Interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference In a residential Installation. This equipment generates, uses, and can radiate radio frequency energy and, If not Installed and used In accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur In a particular Installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to conrect the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Trademark & Regulatory Statements

The Smart Life App and all Smart Life Features are a trademark of Tuya, LLC.
Google Play™ store and all Google Brand Features are trademarks of Google Inc, LLC.
Appia App Stora· and all Appia Brand Features are registered trademarks or trademarks of Apple Inc.

Support

If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at ww.naxa.com to get daily news, alerts, and documentation for your device. For additional  assistance, please contact Naxa Technical Support.

NAXA Technical Support

2320 East 49th St. Vernon, CA 90058
http://www.naxa.com/supportcenter/

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>