Energizer PPS960W2 Portable Power Station User Manual

Energizer PPS960W2 Portable Power Station User Manual

SPECIFICATIONS

Portable Power Station

Model Name: PPS960W2
Battery: Lithium iron phosphate
Capacity: 50Ah/19.2V, 960Wh Max.
DC Input: 24V/4A
USB-C Input: PD100W 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A
AC Output: 3 x 120Vac/60Hz 700W Max. (Peak 1400W Pure sine wave)
DC Output: 2 x 12V/10A (10A Max.)
Car Charger Outlet: 12V/10A Max. (Shared DC Output)
USB Output: 2 x 5V/3A, 9V/2A, 12V/1.5A
USB-C1 Output: PD100W 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A
USB-C2 Output: PD18W 5V/3A, 9V/2A, 12V/1.5A
Solar Panel Input: MPPT 12-25V (100W Max.)
Dimensions: 11.81(L) x 7.68( W) x 11.42(H) Inches/ 300(L) x 195(W) x 290(H) mm
Weight: 20.94±0.5 Pounds/ 9.5kg±0.3kg
Made in China

Pure Sine Wave Output
This product generates pure sine waves, which is compatible with AC electric appliances that work with sinusoidal wave form (power<700W).
However, the product is only used for emergency situations.
It cannot replace the standard DC or AC power supply for household appliances or digital products.

Package Contents
Portable Power Station x 1
Power Adapter x 1
User Manual x 1
Solar Panel Extension Adapter x 1
Carry Bag x 1

PRODUCT DESCRIPTION

AC Output
A. Press the AC on/off button to activate AC mode.
B. Connect the appropriate plug to the electrical outlet/socket to begin charging.

NOTE:
A. Do not connect device/appliance that is over 700W.
B. AC electric plug type is based on the country/region being sold.

HOW TO CHARGE

Power Button
A. Long press the power button for 3 seconds to turn on the power station.
S. Long press the power button to turn off the power station.

AC on/off Button
A. When the power is on, short press the AC button to turn on AC charging.
B. Short press the AC button to turn off the AC charging
C. Under the AC outlet mode, press the AC button for 3 seconds to shift the frequency (60Hz/50Hz).

LED Button
A. When the power is on, press the button to turn on the LED light mode. It will show constant lighting mode and the light bulb icon will show on the display.
B. Press the LED button to adjust the brightness.
C. Press the button again to switch to different modes- flashing light mode, SOS two-colour flashing mode, and off mode. The light bulb icon will shut off too.
D. Warning: DO NOT stare at the light directly.

USB Outputs
A. For fast charge, please use compatible cable and device(s).

NOTE:
When USS-A outputs are overloaded or enter short circuit mode, short press the power button to reactive USS-A charging. For USS-C, unplug and plug in the USS-C cable again to restore charging.

DC Outputs
A. Can connect to a car charger that is no more than 100W.

NOTE:
A. Over-current protection: When the DC output is over current, the corresponding icon on the display will shut off. Short press the power button to restore.
B. Short-circuit protection: When the DC external short circuit protection is on, he corresponding icon on the display will shut off. Long press the power button to restart the power station and restore output.

HOW TO RECHARGE

Fast Recharge Through DC Input+ USB-C PD Input
A. Connect the power adapter to the DC input port to begin recharge.
B. Connect the PD adapter to the USB-C PD input port to begin recharge.
C. The DC input port and USB-C PD input port can charge simultaneously.
The fast charge icon will light up when fast charge is activated.
Remark: To optimize fast charge performance, it is highly recommended to recharge your power station with a USB-C PD adapter (not included) with a high power input of 60W or above is preferred.
USB-C PD 18W port is only for output, do not use PD 18W output port to recharge the power station.

LED Display
A. Charging level show in pie charts of 10 segments.
B. Blinking light indicates charging status, solid light indicates the product is fully charged.
C. The icons will light up when the function is activated.
D. If the power station is not in use, the power station will automatically turn off in 3 minutes.
E. If the power station is in use, short press the power button twice to turn off the LED display(the power supply continues to the output). You can short press any button to activate the LED display.

Recharge Through Solar Panel
A. Place the solar panel where it will get the strongest and most direct sunlight as possible.
B. Connect the cable to the input port to begin recharge.

NOTE:
A. The actual charging efficiency can vary widely depending on the weather, ambient temperature, sunlight’s strength, the angle that the solar panels faces to the straight sunlight and other factors.
B. Use solar panels below 25V for charging, it will automatically cut off when input higher than 25V.
C. Built-in MPPT technology that allows solar panel to recharge efficiently.

Function Introduction

Caution

1. Do not short-circuit the product. To avoid short-circuiting, keep the product away form all metal objects(e.g. coins, hair-pins, keys, etc.).
2. Do not heat the product, or dispose it in fire, water or other liquids. Keep it away from high ambient temperature. Do not expose the product to direct sunlight.
3. Keep the product away from humid, dusty places.
4. Do not disassemble or reassemble this product.
5. Do not drop, place heavy objects on, or allow strong impact to this product.
6. To charge some portable electronic devices. you may need to set those devices in charge mode first. Refer the corresponding user manual of those devices for confirmation.
7. Please keep this product away from children.
8. Do not cover the product with towels, clothing or other items.
9. Do not overcharge this product.
10. When fully charged, disconnect the product from the power source immediately.
11. When charging this product, please keep it away from TVs, radios and other equipment to avoid radio wave interference.
12. If you are not going to use this product for a long time, please disconnect the cable before storing it away.

ℹ This product is NOT waterproof. Please do not use nor store it in a wet environment.
Rain, water spray, juice. coffee. steam. sweat and other liquids may cause a breakdown.
This product is NOT dustproof. Please do not use in sandy and dusty environment, such as beaches and deserts, it may cause a breakdown.

Cold Weather Usage
Cold temperatures 14-140°F (-10 – 65°C) can affect the product’s battery capacity due to chemical characteristics of the battery. If you’ll be living off grid in sub-zero conditions.
it is recommended to keep your product in an insulated cooler, and connected to a power source (car charger/AC adapter/solar panel). The natural heat generated by the product contained in an insulated cooler will keep battery capacity at its highest level.

Disposal and Recycle
This product should not be disposed along with household waste. Please dispose or recycle this product and the battery inside according to the local rules and regulations.

Battery Information
This product has an internal, non-removable, LiFeP04 rechargeable battery.
Do not attempt to remove the battery, as you may damage the device.
The battery can be charged and discharged over 2000 times.

Fault Code

• Fault Code: E01
  Fault Content: DC output overload
  Fault Solution: Disconnect the devices in the DC connection, short press the DC button to switch on the DC output function.

• Fault Code: E02
  Fault Content: DC output short-circuit
  Fault Solution: Disconnect the devices in the DC connection, short press the DC button to switch on the DC output function.

• Fault Code: E03
  Fault Content: AC output input overload or short-circuit
  Fault Solution: Disconnect the AC output device, short press the AC button to switch on the AC function.

• Fault Code: E04
  Fault Content: AC output over-temperature
  Fault Solution: Disconnect the device in the AC connection. When the working temperature returns to the normal level, the fault code will be removed.

• Fault Code: E05
  Fault Content: PD input output overload or short-circuit
  Fault Solution: Disconnect the devices in the PD connection and reconnect it.

• Fault Code: E06
  Fault Content: Battery over-temperature
  Fault Solution: Disconnect all the devices. When the working temperature returns to the normal level, the fault code will be removed.

• Fault Code: E07
  Fault Content: Battery low-temperature
  Fault Solution: Disconnect all the devices. When the working temperature returns to the normal level, the fault code will be removed.

• Fault Code: EO8
  Fault Content: USB-A output overload or short-circuit
  Fault Solution: Disconnect the devices in USB-A connection first.
  Short press the USB button or connect the PD output interface then.
  After that, the fault code will be removed automatically.

• Fault Code: E09
  Fault Content: DC charging over-voltage
  Fault Solution: Disconnect the device in DC connection. Once the voltage turns to normal, the fault condition will be removed automatically.

• Fault Code: E10
  Fault Content: DC charging low-voltage
  Fault Solution: Disconnect the device in DC connection. Once the voltage turns to normal, the fault condition will be removed automatically.

• Fault Code: E11
  Fault Content: Battery input/output over-temperature
  Fault Solution: Disconnect all the devices. When the working temperature returns to the normal level, the fault code will be removed.

Power Safe Management
Guarantees against short circuit and over-charging for your power bank and devices.http://www.energizerpowerbanks.com/product_registration.php

Customer Service
For any questions about the product, please contact us at
service@energizerpowerbanks.com

©2023 Energizer Energizer, Energizer Character and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by TennRich International Corp .

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>