Energizer DS-320A Multi Functional Portable Power Station User Manual

Mult-functional Portable Power Station
User’s Manual
(DS-320A)

Please read this user book carefully before using this power station

Attention

1. After opening the product package, check whether the product appearance is complete and accessories are complete. If any accessory is found missing or damaged, please do not start the product and contact the agency immediately.
2. Before using this product, please read this product manual carefully to understand all relevant details of this product. And stored with the purchase certificate for future reference.

Safety Attentions

1. The product comes with AC output. The disabled or children should use the product under the supervision of the supervisor. Keep it out of reach of children to avoid electric shock.
2. The product has a built-in lithium battery. Do not remove, Pierce, impact, bump or burn the product.
3. The voltage of the electric appliance must be consistent with the voltage labeled on the back of the product, so as not to damage the electric appliance due to different voltages.
4. Keep products and accessories dry and do not expose to high temperatures.
5. The lithium batteries in the product shall be recovered and disposed of in accordance with local regulations.

Product Introduction

This product is a trend, young, personalized, fully functional multi-power portable power station. The application field is very wide, not only can be used in family, office, entertainment, photography, and travel but also can be used in fire, medical treatment, emergency, communication, exploration, construction, camping, mountaineering, and other fields. The product has built-in high safety, long-life lithium iron phosphate lithium battery, suitable for all kinds of emergency power supply equipment power supply, Such as mobile phones, tablet computers, lighting, fan, computer, TV, printer, drone, electric scooter, car refrigerator, car cleaner, car air purifier, heartbeat pacemaker, ventilator, oxygenator, electric wheelchair, blood pressure meter, blood glucose meter, and other electrical appliances. Multi- function output: AC output, DC output, USB output (including QC quick charge and PD quick charge), LED lighting, multi-function Bluetooth speaker, etc. Multi-functional Bluetooth speaker, using a high level of sound cavity structure design, customized high-power speaker, all-around feel music everywhere, lossless acoustic quality wonderful presentation, to achieve a real mobile good sound. Is an economical and practical life of a good power helper, to meet the needs of all kinds of people. AC output is pure sine wave voltage, carrying capacity is strong, interference is small, and good compatibility with the market power is less than 200W electrical appliances. The product has multiple protection: over-temperature protection, overload protection, short circuit protection, over-current protection, over-discharge protection, over-voltage protection, etc The product supports solar charging, AC adapter charging, Car cigarette charging, and Type-c input charging

Product Overview

Function declaration

1. Handle
3. LED lighting switch
4. LED lighting/ SOS lighting
5. LCD display
6. Power switch
7. Car cigarette butt outlet
8/9.DC 12V/3A Output
10. DC Input charge| 11/12.USB-A/18W fast charge
13.TYPE-C/PD30W output
14.TYPE-C/PD60W output/input
15. AC Switch
16. AC Output
17. Speaker key
18.3.5mm(AUX IN) Input
19. USB Play input
---|---

Packing List

Please check the packing for damage before unpacking. After unpacking, check whether the appearance of the product is damaged or accessories are complete. The accessories are as follows. If you have any questions, please contact the dealer or our customer service.

Specification

Multifunctional Portable Power Station

Essential Data
Battery type| LiFePO
Battery capacity| 159WH/49600mAh
Output power| 320W
Dimesion| W250D132H170( MM )
Weight| 2.0Kg
input (Charge)
DC (5521) Input| DC (5521) Charging input port X 1: DC:11-22V/3A, maximum power 60W; Support solar charging, vehicle charging, AC charger charging. Solar charging supports MPPT power tracking function
TYPE-C(PD6OVV) input| TYPE-uCmx 1: POr 60inpwut DchCa5rgVe/r3shao, should Ibe3 pa,D1ag2 v / 3 a, 1t5) v / 3 a, 20 v / 3 a / 60 w
Charging time| DC (5521) charging port, DC19V/3A, about 3 hours
Output (Discharge)

DC (5521) output| DC (5521) x 2: DC12.0—14.5V/3A
Car cigarette output| (EC-5)Output X 1, DC12.0-14.5V/10A (Max. 11.5a)
USB-A output| Usb-a x 2: DC 5V/3A,9W2A,12V/1.5A(18W Max), dual-port output, support single-port blind plug maximum 18W quick charge output, dual-port simultaneous use
total power 5V/3A output. Integrated dual port automatic plug and pull detection function.
TYPE-C(PD3OVV) output| PDoutputDC 5v/3 A, 9 v/3 A, 12 v/2.5A, 15v/2 A,20 v/1.5A(30wMax), integrated automatic plug detection function.
TYPE-C(PD6OW) output| PDoutputDC 5v/3 a, 9 v/3 a, 12 v/3 a, 15v/ 3 a,20v/ 3 a(60wMax), bidirectional input/output, integrated automatic plug detection function.
|
AC output| Pure sine wave output, rated power 200W, peak power 400W. Output voltage: support 110Vac/220Vac(60Hz/50Hz) output (optional). Overtemperature, overload, overcurrent, short circuit protection
Speaker output| Output power:10W; Frequency response: 100HZ-18khz.
Multiple-mode atmosphere lamp,
Multiple playback modes: support Bluelooth, U disk, 3.5mm(AUX In)
LED lighting| LED 3W (white light), LED light has four modes: strong light, weak light, low flash, and high flash (SOS rescue signal flash).”

Product Instructions

Button instruction
This product adopts two groups of switch design, one group is the total POWER switch (POWER) key, and the other group is the segmented function switch (such as AC switch key, LED lamp switch key, sound switch key, etc.). Before the product is started, long press the POWER button for 3 seconds, and the product will be started. When the LCD screen is ON, press the function switch button accordingly, and corresponding functions will be output, such as DC output, LED output, AC output, speaker output, etc. USB-a and Type-C output ports have integrated automatic plug and unplug detection functions to automatically detect the load switch output without pressing the power switch. In the startup state, long press the POWER button for 3 seconds the product enters the shutdown mode, the output is all off, while the LCD screen is off.

Button| Mode|
---|---|---
Power switch| Standby| Long press 3 seconds to power on/off
Power on| Short press to power on/off DC output
AC button| Power on| Short press to power on/off AC output
LED button| Power on| Short press to power on LED, Short press again to standby LED
Long press to power off LED
Speaker| Power on| On the DC output mode, long press to power on/off the speaker
Power+LED
button| Power on| On the no-output mode, long press the Power and LED buttons on
time, the product reset all power information
AC+LED
button| Power on| View the product software version

Attention:

1. When the main switch of the product is on (other switches are not on), if there is no load, the product will automatically enter the shutdown state after 3 minutes.
2. If you do not use this product for a long time, please put the product into shutdown mode

Product input charging
Please fully charge the product before using it. When charging, the product can be charged as long as the corresponding charger connector is directly inserted into the charging input port of the product (charging does not need to turn on the main power switch, it can also be charged under a shutdown state). During the charging process, the LCD screen will display the power icon and charging power. When the product is fully charged, the LCD display will show that the battery is 100%, and the charging input power will be reduced to 0-3W. When the battery is fully charged, the charging will automatically shut down. Please remove the charger at this time. This product has 4 charging modes: solar charging, AC charger charging, car cigarette charging, and Type-c input charging.
Note: Solar charging, AC charger charging, and vehicle charging share a DC input charging port (DC5521), Type-C input charging is Type-C (PD60W) charging port. When type-C input charging and DC input charging are connected at the same time, the condition is “plugin first”, and simultaneous charging is not supported.
Product protection function when charging

1. Charging overcurrent protection: limit the maximum charging current to prevent excessive charging current from damaging the battery and circuit components.
2. Charging overvoltage protection: sets the maximum charging voltage to prevent battery damage or fire.

The following are the DC input parameters during charging

2
3| Max Output| /| /| 60W| 65W
4| Max current| /| /| 3A| 3.3A

1. Solar charging
   Insert the DC head of the solar module into the DC(5521) input charging port of the product, and the solar energy can be charged. This product supports a charging voltage of 11V-23V and a maximum charging current of 3A, please choose 65W power solar module (open circuit voltage is not more than 23V) to charge, the fastest time is about 3 hours when the solar light is good.

Attention ：
The actual charging effect of solar energy depends on local sunshine, climate, environment, and other factors. Please select the appropriate solar energy module according
to the solar energy charging parameters. Remember that the power and open circuit voltage of the solar energy module cannot exceed the above charging parameters. Please place the solar module in the position with the strongest direct sunlight and avoid shadow blocking the solar panel. When the product is not used for a long time, please disconnect the solar module from the product.

2. AC adapter charging
   Connect the standard AC adapter (19V/3A) of the product to the mains and DC(5521) input charging port of the product, you can charge the product quickly and the charging time is about 3 hours. Remove the charger immediately after charging to ensure product safety and prolong the service life of the adapter.

3. Car cigarette lighter charging
   The product can be charged by connecting the car with the DC(5521) input charging port of the product with the vehicle cigarette lighter charging line. In order to protect the car battery from power loss, please charge the product when the car engine is started. After charging, please remove the charging cable.
   

4. Type-c input charging
   The product supports Type-C input charging. If the charger with Type-C (PD protocol) is connected to the type-C (60W) charging port of the product, the product can be charged quickly. The maximum power of Type-C charging can be 60W, and the charging time is about 3 hours. Remove the charger immediately after charging to ensure product safety and prolong the service life of the adapter.
   

The following are the TYPE-C input parameters during charging

5.25V
2| 5V Input| PD protocol of the adapter supports 5V/3A| /| 3A| 3.3A
3| 9V Input| PD protocol of the adapter supports 9V/3A| 8.55V| 9V| 9.45V
4| 9V Input| PD protocol of the adapter supports 9V/3A| /| 3A| 3.3A
5| 12V Input| PD protocol of the adapter supports 12V/3A| 11.4V| 12V| 12.6V
6| 12V Input| PD protocol of the adapter supports 12V/3A| /| 3A| 3.3A
7| 15V Input| PD protocol of the adapter supports 15V/3A| 14.25V| 15V| 15.75V
8| 15V Input| PD protocol of the adapter supports 15V/3A| /| 3A| 3.3A
9| 20V Input| PD protocol of the adapter supports 20V/3A| 19V| 20V| 21 V
10| 20V Input| PD protocol of the adapter supports 20V/3A| /| 3A| 3.3A

Product discharge

1. DC output
   This product has two DC5521 outlets and one EC-5 cigarette lighter outlet. DC5521 outlet is a double port output. After long pressing the POWER button for 3 seconds, the product will be turned on. When the product is on, press the POWER button for 1 second to output DC, and the LCD screen displays the DC icon to POWER the DC electric appliance. At the same time, the LCD screen displays the total output POWER. In the DC output state, press the POWER button for 1 second to turn off the DC output and the DC icon on the LCD disappears. 1. DC output: DC5521 output is double output, the output DC voltage range is 12.0V~14.5V, the rated current of single output is 3A, the maximum current of double output is 6A.
   

2. Cigarette lighter (EC-5) outlet: The output voltage range is DC12.0V~14.5V, and the rated output current is 10A (maximum 11.5a). The following is the output connection diagram of the DC cigarette lighter:
   

DC output protection mode

1. Over-low voltage protection: in order to protect the battery from over-discharge, when the battery is about to run out, it will automatically turn off the DC output, please charge the product.
2. Over high voltage protection: in order to protect the electric appliance from burning out, when the battery voltage is too high, it will automatically shut down the DC output.
3. DC overcurrent protection: when the total DC electric current exceeds the maximum allowed current, the DC output will be automatically shut down and an error message will be displayed. Please remove some DC electrical appliances and restart them.
4. DC short-circuit protection: When the DC output port is short-circuited, the DC output is automatically shut down and an error message is displayed. Rectify the fault and restart the device.
   Note: When the battery voltage is low, the product will automatically turn off the DC output under the startup state. At this time, a short pressing of the main switch (POWER) button of the product will not output the DC. Please charge the product in time.

2. USB output
This product has two USB-A outlets and two Type-C outlets. Use-a *2 output port: DC 5V/3A, 9V/2A,12V/1.5A, double port output, support single port blind plug maximum 18W quick charge output, when used at the same time, do not support fast charge, total power 5V/3A output. Support QC3.0 QC2.0 / AFC/BC1.2 / APPLE and so on many kinds of quick charge agreements. Integrated dual port automatic plug and pull detection function. TYPE- C (PD30 w) output: PD output DC 5 v / 3 A, 9 v / 3 A, 12 v / 2.5 A, 15 v / 2 A, 20 v / 1.5 A (30 w Max), support QC3.0 QC2.0 / AFC/BC1.2 / APPLE, and so on many kinds of quick charge agreement. Integrated automatic plug detection function.
TYPE- C (PD60 w) output: PD output DC 5 v / 3 a, 9 v / 3 a, 12 v / 3 a, 15 v / 3 a, 20 v / 3 a (60 w Max), support QC3.0 QC2.0 / AFC/BC1.2 / APPLE and so on many kinds of quick charge agreement. Bidirectional input/output integrated automatic plug detection function. Connect the USB device to the product USB output port correctly. Product USB-A and Type-C are integrated with an automatic plug-and-unplug detection function, which can automatically power mobile phones, tablets, computers, and other electrical devices. Meanwhile, THE LCD screen displays corresponding USB-A and Type-C ICONS and total output power. Protected mode

1. Over-low voltage protection: in order to protect the battery from over-discharge, when the battery is almost exhausted, the USB output will be automatically shut down, please charge the product.
2. Over high voltage protection: in order to protect the electrical appliances from burning out, when the battery voltage is too high, it will automatically turn off the USB output.
3. USB overcurrent protection: When the USB current exceeds the maximum allowed current, the USB output will be automatically shut down and automatically recovered after the load is removed.
4. USB short-circuit protection: When the USB output port is short-circuited, the USB output is automatically shut down and automatically recovered after the load is removed.
   Note: USB is integrated with an automatic plug and unplug detection function. USB or Type-C icon is displayed on the screen only when the load is connected. The icon disappears when the load is not connected. When the Type-C 60W port is discharging and the input DC 5521 port is plugged into the DC for charging, the product will be charged first, and the output port of Type-C 60W will be closed.

4. LED lighting
This product supports 3W LED lighting output, LED output in four modes: strong light, low light, low flash, and high flash (SOS rescue signal light). It can provide long-time lighting for outdoor, domestic, and emergency places. After long pressing the POWER button for 3 seconds, the machine will be turned on. Under the starting state, press the LED button for 1 second to turn on the LED light. Then, the LED light will enter the mode of strong light, low light, low flash, high flash (SOS rescue signal light), and off
successively.
5. Bluetooth Speaker mode
This product has a built-in multi-functional Bluetooth speaker, uses a high standard sound cavity structure design, customized high-power speaker, the all-around feel of music everywhere, lossless acoustic quality wonderful presentation, to achieve a real mobile good sound. Dynamic, clear, and full, balanced high and low, accompanied by a variety of modes of atmosphere light belt. After long pressing the POWER button for 3 seconds, the product will be turned on. After short pressing the POWER button for 1 second, the DC icon will be displayed on the LCD screen. After long pressing the left speaker button for 3S, the speaker playing mode will be opened.

Speaker Button

1. Power button
2. Color lighting button
3. Mode button
4. Vol-/Previous
5. Play/Pause
6. Vol+/Next song

increase the volume; Long press to select the next song
AUX IN| Long press to power ON/OFF| Adjust the color lighting| Short press to switch mode: BT-AUX-USB| Short to decrease the volume| Short press to play or pause music| Short to increase the volume
USB| Long press to power ON/OFF| Adjust the color lighting| Short press to switch mode: BT-AUX-USB| Short to decrease the volume; Long press select the previous song| Short press to play or pause music| Short press to increase the volume; Long press to select the next song

6. AC Output
This product has one AC output port, the output sine wave voltage is: 110V/220V, 50/60Hz (optional), the rated output power is 200W, the peak power is 400W, (please refer to the specific specifications of the product actual label, subject to the actual product). Correctly connect the AC electrical appliance to the AC output interface of the product. Hold down the POWER button for 3 seconds and the product will start up. When the product is on, hold down the AC button for 1 second and the AC output will be displayed on the LCD screen. After the AC output is enabled, press the AC button for 1 second to turn off the AC output and the AC icon on the LCD screen. AC output protection

1. Over-low voltage protection: To protect the battery from over-discharge, when the battery is too low, the AC output will be automatically turned off. Please charge the product.
2. Over high voltage protection: To protect the product, the AC output is automatically turned off when the battery voltage is too high.
3. Overpower protection: when the power of the appliance exceeds the maximum available power of the product, the AC output will be automatically turned off.
4. Short circuit protection: When the AC output is short-circuited, the AC output is automatically shut down. Rectify the fault and then turn on the AC output.
5. Over temperature protection: When the product is over-temperature, the AC output is automatically turned off.

Attention:

1. When the AC function is not used, disable the AC output in time.
2. When the battery is low, the product will automatically turn off the AC output under the startup state. At this time, short press the PRODUCT AC switch (AC) button, and the AC will not output, please charge the product in time. In this case, it is normal that the USB and LED can work normally, but the AC and DC cannot be turned on.
3. The power display is only an approximate power value, and there may be some deviation. Because the actual power is related to the characteristics, efficiency, and power factors of electric appliances, some error is normal.

Caution:

1. Before using the AC function, ensure that the AC output voltage and output frequency of the product match the voltage and frequency of the electric appliance to avoid damage to the appliance.
2. Please ensure that the rated power of the electrical appliance is less than the rated power of the AC output of the product, preferably within 80% of the rated power of the AC output of the product. The AC output power provided by this product is rated power of the resistive load. When some load is inductive load and capacitive load, the power of this kind of load will be several times or up to 10 times the rated power when starting up, so the product will be overloaded and automatically shut down. Therefore, reduce the startup of this load.
3. If the AC output is not in use, disable the AC output to save power

3.4 LCD error indication
When this product cannot power or charge other devices, please follow the following steps to check.

1. Please confirm the power switch is powered on.
2. Check the battery level. If the battery level is lower than 10%, charge it as soon as possible.
3. Ensure that the load equipment conforms to the power limit of the product, i.e. the load power is within the maximum input range of each output interface.
4. Refer to the following fault code for troubleshooting or contact our customer service.
   Fault code| Display Position| Fault Cause| Fault Clearing
   ---|---|---|---
   E001| Main control board| DC OOCP DC and Car charger overcurrent| Reduce DC load
   E002| DC Main control board| DC OSCP DC and Car charger
   output is short-circuited| Check the load of car charger
   E003| Inverter board| AC Error AC module errors| Check whether the AC output is overloaded
   E004| DC Main control board| PD Error Type -c the 60W charge port
   is abnormal| Check the load of Type-C 60W charge port
   E005| Battery pack| The battery temperature is too high| Turn off to decrease the
   temperature
   E006| Battery pack| The battery temperature is too low| Turn The turnoff to elevate the temperature
   E007| DC Main control board| USBA ERR USBA or Type-C 30W charge port is abnormal| Check USBA and the load of
   Type-C 30W
   E008| | DC charge voltage is too high| Reduce the DC input charging
   voltage
   E010| DC Main control board| Battery overcurrent, Prompt the user to
   dose some output or the system will
   intervene| Reduce the load
   E011| | Battery Undervoltage warning| Please recharge right now
   E012| | Battery low voltage warning| Please recharge right now
   E014| | |

If the fault persists, contact your agent or customer service center.

Product Usage Note

1. This product is a lithium-ion battery product, with no memory effect, and no charge and discharge activation.

2. To prolong the service life of the product, please charge the product in time to avoid deep discharge.

3. This product charging, the ambient temperature should be between 0~+45 ℃, the discharge ambient temperature should be between -20~+45 ℃, and the best use of ambient temperature is +15~+25 ℃.

4. The charge-discharge cycle of the battery is more than 2000 times (when the discharge depth is 80%). After 2000 times, the capacity decreases significantly, and the battery
   eventually fails.

5. When the product is discharging, if the total power of the load when starting exceeds the rated total power of the product, the product automatically protects the shutdown, please reduce the load power and restart again.

6. In the process of charging and discharging, if any peculiar smell or abnormal sound occurs, please stop charging and discharging immediately.

Product maintenance and safety

1. When using this product, pay attention to the danger of electric shock.
2. Do not use a charger that does not match the product to charge the product.
3. Do not expose the product to high temperature, high humidity, high salinity, and a corrosive environment.
4. Do not expose the product directly to the sun or fire.
5. Do not place or store this product with metal objects in bulk.
6. Do not disassemble or assemble this product without permission.
7. Do not intentionally knock, bump, Pierce, or drop the product.
8. Do not store for a long time under the condition of low power.
9. Do not cover the product with towels, clothes, and other foreign matters during use, so as not to affect heat dissipation.
10. Do not connect the charger to this product for a long time.
11. Keep this product out of reach of children.

Product storage and transportation

1. The storage temperature of the product is -20~+50 ℃. In order to ensure the safety of the product, please store the product in a dry and cool environment, the best environment temperature is +15~+25 ℃.
2. If not used for a long time, please seal the product in shutdown mode.
3. If it needs to be stored for a long time, please fully charge the product every 3 months, at least every 6 months to ensure the battery life.
4. When storing and transporting, please place the product in the correct direction.
5. Please handle with care during transportation, do not throw, and do not weigh.

This product uses lead-free material (including lithium battery), but it is difficult to degrade naturally. In the process of degradation, there will be certain pollution to the environment, and it contains precious and rare metals. In order to protect the environment and effectively use the earth’s resources, please be sure to send the discarded products to the local professional recycling institutions.

Product quality guarantee

Products from the factory, the mainframe warranty for one year. During the warranty period, if the product fails in normal use, we will provide free maintenance and replacement of relevant components after confirmation by our company, and the product quality card and product-related information shall be provided.
Please note that during the warranty period, our company cannot provide free repair service under the following conditions.

1. Open the product inside without permission
2. Product surface coating and appearance damage are not covered by warranty
3. Failure caused by user’s failure to follow instructions
4. Failure or damage due to accident, human, or environmental factors (such as collision, improper operation, unreasonable voltage, unreasonable load, damp).
5. Failure or damage caused by force majeure of natural disasters (e.g. earthquake, disaster, tsunami).
6. Product packaging and accessories are not covered by warranty
7. After the warranty period, our company does not provide free maintenance services, but can provide paid maintenance services

The company will not bear any legal liability for any damage caused by improper operation of the product. Meanwhile, the product is no longer guaranteed, and cannot provide after-sales quality guarantee service. s manual will be updated from time to time according to notice. Please ructions. Users shall the requirements unless specially stated, a new version without special and use the product in strict accordance with the inse consequences of any accident caused by violation of

Product Declaration

Without the permission of the company, any individual or unit shall not copy, copy, or extract, and violators will be investigated for the corresponding legal responsibility.
This manual will be updated from time to time according to product version upgrades unless specially stated, a new version without special notice. Please operate and use the product in strict accordance with the instructions. Users shall bear the consequences of any accident caused by violation of the requirements.

Thank You For Choosing This Product
Made In China

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Version 1.0

Documents / Resources

| Energizer DS-320A Multi Functional Portable Power Station [pdf] User Manual
DS-320A, DS320A, 2A8NC-DS-320A, 2A8NCDS320A, DS-320A Multi Functional Portable Power Station, DS-320A, Multi Functional Portable Power Station, Multi Functional Power Station, Portable Power Station, Power Station
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>