AORIN 350ML Vaccum Insulated Water Bottle User Manual

AORIN 350ML Vaccum Insulated Water Bottle

CAUTIONS: It is recommended to clean the product before first use and to wash all parts thoroughly with water or warm soapy water as soon as possible after each use. Allow all parts to dry before storage or next use.

• When the bottle is filled with hot water or drinks, keep it out of the reach of children to prevent the bottle from tipping over and causing burns.
• When using a water bottle for ice or carbonated drinks, do not fill it too full to avoid spillage or carbonated gas creating strong pressure that could cause the cap to pop out or the liquid to leak.
• Do not heat in a microwave oven; do not place near heat sources such as gas stoves, ovens, and heaters as this may cause discoloration or damage to the bottle.
• Do not use abrasive cleaners or washing-up liquids as they may dull or discolor the powder coating on the surface of the bottle.
• Missing, worn or misaligned rubber rings on bottle caps may cause product leakage, so check regularly to ensure that the rubber ring is not faulty and is fitted in the correct position
• Be sure to screw on the lid when you are not drinking to prevent the bottle from tipping over and spilling the drink causing burns or injuries.

INSTRUCTIONS FOR USE

1. Rotate the cover to remove it.
2. Check that the sealing gasket on the inside of the lid is attached to the lid. (This is essential to keep the water bottle warm for a long time and to prevent leaks)

For maximum thermal efficiency and to keep your drinks hot/cool for longer, preheat or pre-cool the product before initial use by:

• Fill the bottle with boiling water, close the cap and tighten it, let it stand for 5 to 10 minutes, then empty the bottle of hot water, fill the container with the contents, and re-close the cap to increase the thermal efficiency. Do not use a microwave oven, conventional oven, or other heat source for this purpose.
• Do the same for cold drinks. Fill the bottle with ice water or crushed ice, leave it to stand for 5 to 10 minutes, and then pour it out before filling it with other drinks.

Please be careful not to overfill the container and leave space at the top of the bottle to screw on the cap to avoid burns or scalds from hot liquid spillage.

CLEANING INSTRUCTIONS

The contents should not be left in the container for more than 24 hours. Please wash the water bottle promptly after each use to prevent odor or mold and to maintain product hygiene.

Note: The cap and the accompanying straw are not dishwasher safe.
However, please take care not to use harsher detergents (dishwashing detergents with high chlorine or bromine content) as this may affect the appearance of the product and cause the appearance of the water bottle to age or fade more quickly.

• When washing manually, it is recommended to wash the bottle with a mild detergent and warm water, please do not use thinners or bleach.
• It is recommended to use a cleaning sponge to clean the inside of the product.
• Please do not use metal or nylon brushes to prevent scratching on the inside.
• If removing the rubber ring from the cap for thorough cleaning, ensure that the rubber ring is fitted correctly and securely when reassembling.
• For solidified rust spots or stubborn water stains caused by impurities in the water, soak overnight in a solution of warm water and baking soda to remove stubborn stains.
• If the product is not used for a long time, wash it thoroughly with water and dry it well.

AFTER-SALE INSTRUCTIONS

• The raw materials used in our AORIN® products are all BPA-free, food-grade, safe, and hygienic materials. Our brand also supplies original caps and when you need replacement parts for your product, you can contact the AORIN® customer service team by email or purchase from an authorized AORIN online shop.
• If you have any questions or suggestions about this or other AORIN® products, please send an email to oglxh1925@vip.163.com and we will actively help you to resolve them and provide feedback on your suggestions.

MAINTENANCE & USE

• Firstly, thank you for purchasing an AORIN® product.
• Before using this product, please check your product and read the following information carefully.
• If you have any questions about these instructions or have any problems with the product, you are welcome to contact us to answer your questions.
• You can find us by contacting the seller through the Amazon platform or sending an email to oglh1925@vip.163.com and we will try to get back to you within 24 hours, thank you for your purchase and support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>