ventev 553902 Power Extender for Light Poles Owner’s Manual
- June 23, 2024
- ventev
Table of Contents
ventev 553902 Power Extender for Light Poles
OWNER’S MANUAL
The Ventev Power Extender for Light Poles is designed to provide continuous operation for PoE devices on light poles with intermittent AC power supply. It offers primary power during daylight hours and performs a fast recharge at night when AC power is available to charge the battery bank.
Available Models
| Description | MFG Part # | SKU |
|---|---|---|
| Single-Port PoE+ 120/240 VAC | PWR-XTDR-VNV204 | 553902 |
| Multi-Port PoE+ 120/240 VAC | PWR-XTDR-VNV235 | 200667 |
| Single-Port PoE+ 277/480 VAC | PWR-XTDR-HI | 588929 |
| Multi-Port PoE+ 277/480 VAC | PWR-XTDR-VNV247 | 299428 |
*NOTE: Each system includes power supply and charger, PoE injector, battery bank w/ strap, wire harness, and RJ45 feed-thrus.
Features & Benefits
- Designed for streetlights or light poles with intermittent power (AC power controlled by a remote light sensor or timer).
- Battery bank provides 18 hours of power during the day, recharges within 6 hrs at night.
- Converts 120 VAC input power to PoE+ for wireless radio and 35 W max for common PoE devices such as cameras for most common PoE devices.
- Powers one access point and up to 2 ports (max 35 W power available) for PoE devices.
- Outdoor PoE injector for power/data to wireless radio (i.e., access point).
- Unmanaged PoE switch to combine data from 1-2 cameras and pass to POE injector.
- NEMA 4X enclosure includes latch locks for protection and security.
- Seamless power transfer from AC site power to battery reserve ensures access point remains powered and radio rebooting is avoided.
All product specifications are subject to change without notice or obligation.
Specifications Continued
Applications
- Municipal Wi-Fi deployments on light poles or streetlights enabling traffic management.
- Public Wi-Fi deployments on light poles or streetlights at parks and recreation areas.
- Outdoor security cameras deployed on light poles or streetlights.
Installation: AC Surge Suppression
Installation: DC Surge Suppression
Product Usage Instructions
Installation
- Mount the power extender securely on the light pole using the included mounting flanges.
- Connect the AC power input to the designated port on the enclosure.
- Connect your PoE devices to the RJ45 ports on the enclosure using the provided wire harness and RJ45 feed-thrus.
Operation
The power extender will provide power to your PoE devices during the day and recharge its battery at night. Ensure that the power extender is properly connected and mounted for optimal performance.
Maintenance
Regularly check the power extender for any signs of damage or wear. Keep the enclosure clean and free from debris that may affect its operation. Replace the battery as needed according to the estimated usable life provided in the specifications.
Specifications
| Hours of Operation | 18 hrs. at max power draw |
|---|---|
| Gigabit PoE | 10/100/1000 Mbps PWR + DATA OUT (data + power) |
| System Protections | Low Voltage Disconnect, DC input fuse protection, |
short circuit protection (auto-reset)
Terminal Blocks| AC with 3 phase, 3 PST, 2 position switch,
DC for 12 V & ground
Operating Temperature| -13° to 122°F (Includes battery/s)
Enclosure NEMA Rating| 4X
Enclosure Material| White Aluminum
Enclosure Locks| Pad Lockable Latches
---|---
Mounting| Pole (mounting flanges included)
Included (not installed)| Battery harness, 1-hole plugs, 3 RJ45 glands
All product specifications are subject to change without notice or obligation.
[email protected]
00-851-4965
©2024 Ventev
For warranty information,
visit ventevinfra.com
FAQ
Q: How long does the battery last on a single charge?
A: The estimated usable life of the battery is 4-5 years for the 54 Ahr model and 2-3 years for the 100 Ahr model.
Q: What protections are in place for the Gigabit PoE system?
A: The system includes protections such as Low Voltage Disconnect, DC input fuse protection, and short circuit protection with auto-reset.