Energizer ECA007 Magnetic Wireless Car Charger User Manual

June 1, 2024
Energizer

Energizer ECA007 Magnetic Wireless Car Charger

Specification:

  • Model Name : ECA007
  • Rated Input : USB-C 5V/2A, 9V/2A
  • Wireless Output : 5W/7.5W/10W/15W
  • Dimensions : 63(L) x90(W) x28(H) mm
  • Weight : 50g$10g

Package Contents

Energizer-ECA007-Magnetic-Wireless-Car-Charger-fig1

Energizer-ECA007-Magnetic-Wireless-Car-Charger-fig11

  1. Magnetic Charging Pad
  2. USB-C Port
  3. LED Indicator

LED Light Indicator

  • Greenlight : Charging
  • Red light : Foreign object detection, please remove the object immediately

WARRANTY

All products from the date of purchase are qualified for a limited-time warranty.

For more warranty information, please visit: http://www.energizerpowerbanks.com

Safety Instructions

  • Avoid water, heat, fire, penetration of the product, and severe drops at all times.
  • Do not insert another object to the USB ports other than the USB connectors.
  • During charging, your device and the product may feel slightly warm, this is normal.
  • Do not clean the product with water or other cleaning products, clean the exterior with a lightly wetted cloth or napkin.
  • Any intentional and physical damage to the product will not be under the warranty conditions.
  • Do not place any metal or flammable object on top of this product.
  • This product is not suitable for extreme climates, please store and use this product properly.

How to USE

  1. Install the charging pad onto the dash mount
  2. Screw the charging pad tightly onto the dash mount
  3. Clean the surface to ensure better attachment
  4. Remove the back of the sticker
  5. Place your dash mount where it’s suitable for your viewing
  6. Connect USB charging cable to the charging pad to begin charging

Energizer-ECA007-Magnetic-Wireless-Car-Charger-fig5

  1. Install the charging pad onto the windshield mount
  2. Place your windshield mount on the windshield or dashboard
  3. Press down the clamp on the mount to attach tightly to the dashboard
  4. Connect USB charging cable to the charging pad to begin charging

How to Pick the Right Case

Energizer-ECA007-Magnetic-Wireless-Car-Charger-fig7

  1. Install the charging pad onto the air vent clip
  2. Install the air vent clip to the air vent
  3. Screw tightly onto the air vent and adjust to your preferred angle
  4. Connect USB charging cable to the charging pad to begin charging

Please use a compatible magnetic case for optimal results.

iPhone 11/X/8/SE series can charge wirelessly with a magnetic case that’s compatible with the charging stand.

PowerSafe Management

Guarantees against short circuits and over-charging for your power bank and devices.

Customer Service

For any questions about the product,
please contact us at service@energizerpowerbanks.com

  • Dispose of the battery properly, and seek for local disposal facility for advice.
  • Do not dispose of, dissemble, damage, or incinerate the battery at all times.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.It this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
  • FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm the radiator your body.

Energizer-ECA007-Magnetic-Wireless-Car-Charger-fig10

©2023 Energizer. Energizer, Energizer Character and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by TennRich International Corp..

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals