NSL 5CCT LED Task Bar Instruction Manual
- June 10, 2024
- nsl
Table of Contents
NSL 5CCT LED Task Bar
Product Information
The LED Task Bar is a slim-profile fixture that comes in four different sizes (12, 18, 24, and 48 inches) and is capable of adjusting its color temperature to 2700, 3000, 3500, 4000, or 5000K.
Included in the Box
- LED Task Bar fixture
- Mounting clips
- Power cord with input connector
- Screws for mounting clips
Maintenance
To ensure the product’s longevity, please read all instructions before installation. Any damage caused by incorrect installation or maintenance will void the warranty. There are no additional costs related to installation or transport covered under the warranty. If replacement parts are required, it is the customer’s responsibility to cover the cost of those parts.
Product Usage Instructions
Installation
WARNING: Disconnect power before installation or maintenance.
- Install the mounting clips in the desired position using the screws provided (refer to Fig.1).
- Remove the plastic cover from the input connector of the LED Task Bar.
- Insert the fixture into the mounting clips and connect the power cord to the input connector (refer to Fig.2).
- If using a plug-in power cord, connect it to a 120V AC receptacle. If using a hardwire power cord, connect it to the incoming 120V AC cable. Note: Hardwire connection should be done by a certified electrician.
Fig.1: Mounting clips for
installation of LED Task Bar.
Fig.2:
Connecting power cord to input connector.
FIXTURE INSTALLATION
CCT adjustable in 2700, 3000, 3500, 4000, 5000K color temperatures
- LEDLB-5CCT-12
- LEDLB-5CCT-18
- LEDLB-5CCT-24
- LEDLB-5CCT-36
- LEDLB-5CCT-48
Important: Read all instructions in order to ensure safety and proper installation.
With its slim profile and 5CCT, the LED Task Bar is the perfect choice for the modern kitchen.
INCLUDED IN THE BOX
-
Screws (2 units)
-
Mounting Clips (2 units)
-
End to End connector (1 unit)
MAINTENANCE
- Do not modify this fixture. Any modifications may render the product unsafe and void warranty.
Limited Warranty
The warranty applies to the product from the original date of purchase for
three (3) years against manufacturing defects. The customer must provide proof
of purchase. The manufacturer’s obligation under this warranty is limited to
repairing or replacing the component. It is not related in any way to the cost
of the connection, the installation of the replacement parts or cost of
transport.
INSTALLATION GUIDE
WARNING
Disconnect power before installation or maintenance.
- Install the mounting clips in the desired position using the screws provided. (Fig. 1)
- Remove the plastic cover of the input connector.
- Insert the fixture into the mounting clips. Connect the power cord to the fixture’s input connector. (Fig. 2).
- Connect the plug in power cord to the 120V AC receptacle, or the hardwire power cord to the incoming 120V AC cable.
NOTE: the hardwire connection should be done by a certified electrician.
PLUG-IN INSTALLATION
HARDWIRE INSTALLATION
JOINING MULTIPLE LUMINAIRES USING JUMPER CABLES
JOINING MULTIPLE LUMINAIRES USING END TO END CONNECTORS
