Energizer 44577 Color-Changing Wireless Remote 12 Inch Light Bar Instruction Manual

: October 30, 2023
: Energizer

Table of Contents

Energizer 44577 Color-Changing Wireless Remote 12-Inch Light Bar
Battery Operated Light Bar, Color Changing Remote Control
Product Usage Instructions
BATTERY INSTALLATION
REMOTE OPERATION
MOUNTING INSTRUCTIONS
FCC STATEMENT
Documents / Resources

Energizer 44577 Color-Changing Wireless Remote 12-Inch Light Bar

Battery Operated Light Bar, Color Changing Remote Control

The Battery Operated Light Bar with Color Changing Remote Control is a wireless light bar that can be used to add ambiance and style to any room. With its color-changing feature and remote control, it is easy to use and customize to your preferences.

Product Usage Instructions

Battery Installation

To install batteries, slide the back cover of the light bar in the direction of the arrow to open the battery compartment. Insert 6 AA batteries, making sure to note the polarity. Replace the cover by sliding it in the opposite direction.
Remote Control Battery Installation
For first-time use, remove the battery isolation tab from the remote control. To replace the exhausted battery, unscrew the battery door on the back of the remote. Insert 1 CR2032 battery, noting polarity. Replace the cover and screw it back in.
Remote Control Operation
Switch the remote control to RF for remote control functions. Press the ON button to turn on the lights. The default setting is white. Pressing the FADE button will slowly cycle through the spectrum of colors. Press the WHITE button to switch the lights back to white. Use the + and – buttons to brighten or dim the lights. The R, G, and B buttons stand for red, green, and blue. These buttons allow you to either select one of these colors or blend them to select the desired color.
To go directly to a specific color, hold the R, G, or B buttons for three seconds. Press and release the buttons repeatedly to move through the RGB spectrum one color at a time. Press and release the R, G, and B buttons in any combination to create custom colors. The SAVE button allows you to quickly return to your favorite color. Once the desired color is found, hold the SAVE button until it flashes. The color will now be easily selectable by pressing the SAVE button.
The 15, 30, 45, and 60 buttons automatically turn the lights off after the number of minutes indicated on the button.
Manual Operation
Move the switch to the ON position to turn the light on. The only color option in manual operation is white. Move the switch to the OFF position to turn the light off.
Mounting Instructions
To mount the light, remove the battery cover and use screws and the included mounting template or double-sided tape to mount it in the desired location. Reattach the light to the mounted battery cover.
For any assistance or queries, contact our U.S-based Consumer Care at 1-800-654-8483 between 7 AM-8 PM CST. The product comes with a 90-day warranty. Visit www.byjasco.com for warranty details

BATTERY INSTALLATION

Open the battery compartment on the back of the light by sliding the back cover in the direction of the arrow. Insert 6 AA batteries, noting polarity. Replace cover by sliding in opposite direction.
REMOTE:
NOTE: Remove battery isolation tab for first-time use.
To replace exhausted battery, unscrew the battery door on the back of the remote. Insert 1 CR2032 battery, noting polarity.
Replace the cover and screw back in.

REMOTE OPERATION

NOTE: Switch to “RF” for remote control functions (See Fig. 1).

On the remote, press the “ON” button to turn the lights on. The default setting is white.
Pressing the “FADE” button will slowly cycle through the spectrum of colors.
Press the “WHITE” button to switch the lights back to white.
Use the “+” and “-” buttons to brighten or dim the lights.
The “R,” “G” and “B” buttons stand for red, green and blue.
- These buttons allow you to either select one of these colors or blend them to select the desired color.
- a. Hold the “R,” “G” or “B” button for three seconds to go directly to that color
- b. Press and release the buttons repeatedly to move through the RGB spectrum one color at a time.
- c. Press and release the R, G and B buttons in any combination to create custom colors.
The “SAVE” button allows you to quickly return to your favorite color. Once the desired color is found, hold the “SAVE” button until it flashes. The color will now be easily selectable by pressing the “SAVE” button.
The “15,” “30,” “45” and “60” buttons automatically turn the lights off after the number of minutes indicated on the button

MANUAL OPERATION:

Move switch to ON position to turn the light on. The only color option in manual operation is white.
Move switch to OFF position to turn the light off.

MOUNTING INSTRUCTIONS

NOTE: Mounting template is provided under the product.
To mount light: Remove battery cover and mount in desired location using screws and the included mounting template or double-sided tape. Reattach light to mounted battery cover.

Anchors are included for installing screws in the sheetrock.
NOTE: Battery door may remain mounted when changing batteries.
Functional range may be adversely affected by one or more of the following factors: weather, radio frequency interference, low battery or obstructions between the transmitter and receiver.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

This device must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

MADE IN CHINA/HECHO EN CHINA ©2020 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC, and related subsidiaries and are used under license by Jasco Products Company, LLC. Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8 PM CST. 90-day warranty. Visit www.byiasco.com for warranty details Read instructions or watch the easy-to-follow video. Scan QR code or visit https://byjasco.com/44577i

Documents / Resources

| Energizer 44577 Color-Changing Wireless Remote 12 Inch Light Bar [pdf] Instruction Manual
CD14FCB, 2A9IJ-CD14FCB, 2A9IJCD14FCB, 44577 Color-Changing Wireless Remote 12 Inch Light Bar, Color-Changing Wireless Remote 12 Inch Light Bar, Wireless Remote 12 Inch Light Bar, 12 Inch Light Bar, Light Bar
---|---