bonsaii C233-B Sheet Auto Feed Paper Shredder

: June 14, 2024
: Bonsaii

Table of Contents

bonsaii C233-B Sheet Auto Feed Paper
IMPORTANT SAFETY INTRODUCTIONS BEFORE FIRST USE
TECHNICAL SPECIFICATIONS
OPERATING INSTRUCTIONS
PRODUCT MAINTENANCE
TROUBLESHOOTING
LIMITED WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

bonsaii C233-B Sheet Auto Feed Paper

TIPS

Thank you for choosing our product!
To ensure that the machines are free of quality issues, we conduct 100% inspections. However, some shred papers may remain in the basket or on the blades during machine testing. If this causes any discomfort or
inconvenience, please contact our customer service and we will provide better service for you. Thank you!

IMPORTANT!

Please read and keep the manual for future reference.
Carefully read each step and follow the correct sequence of operation.
Please place the equipment on a flat and stable surface to prevent tipping over, as this may cause the machine to crack or become unusable.
The device should be placed as close as possible to an accessible wall outlet.
Do not disassemble, modify or repair the device on your own to avoid electric shock, injury or damage to the machine.
When you empty the basket, move the device, or do not need to use the device for a period of time, make sure the device is turned off and unplug the power plug to prevent fire or electric shock.
Do not use flammable liquids, gases, water or cleaners to clean the device to avoid fire or electric shock.
Do not use the device in a high temperature, high humidity, or heavily dusty environment to prevent fire, electric shock, or machine malfunction.
Do not put tape, carbon copy paper, fabric, plastic film, etc. into the device for shredding to avoid damage to the machine.
Do not damage or process the power cord, and do not place heavy objects on the cable to avoid fire, injury or electric shock.
lf smoke or odor occurs during use, immediately turn off the power and stop using it to prevent fire or electric shock.
Do not use the shredder or power cord if it is damaged or defective to avoid fire or electric shock.
Do not shred greeting cards with sound chips or batteries to avoid fire or electric shock.

IMPORTANT SAFETY INTRODUCTIONS BEFORE FIRST USE

User information / safety instructions.

WARNING
Please do not allow children to use the machine.

There are sharp blades inside the machine so as to avoid injury. Please be sure to exercise caution when using it.
- Please do not put your hand close to the shredder blades and the paper feed opening.
- There are sharp blades inside the machine so as to avoid injury. Please be sure to exercise caution when using it.
  - Please do not let hair near the shredder’s feed opening.
- If your hair is accidentally sucked in, please use the “reverse function” to remove the danger.
  - Please keep your clothing or some small items away from the feed opening of the paper shredder, such as ties, necklaces, sleeves, jewelry, etc.
  - Please don’t use inflammable liquids, gases water and cleaner to clean the machine.
- To avoid fire accident.
  - Please kindly don’t touch the sharp edges to avoid injury .
This equipment is not intended for use by children.Avoid touching the media feed opening with the hands,clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this
equipment, keep body parts away from moving parts.
Manual-Feed cannot be over 12 sheets in one time for the quantity of shredding.
Auto-Feed cannot be over 110 sheets in one time for the quantity of shredding. One folded sheet of paper equates to 2 sheets of paper.
Heavier paper, humidity or other than rated voltage may reduce capacity. 85% Maximum sheets per pass to avoid jams.

KNOW YOUR SHREDDER

Power Switch
- : OFF
- : ON
Auto-feed Supporting plate
Auto-feed fixed rod
Auto-feed Connecting plate (top and bottom)
Auto-feed opening
Auto-feed cleaning button
Auto-feed Connecting plate lock
Manual Feed Opening
Auto button
REV Button(“Release the paper”)
FWD button (“Compulsorily work”)
Hidden Basket handle
Transparent Window
Basket
caster
Caster brake

For safety reasons, shredder will operate only If the shredder head is In correct position and used with supplied basket.

TECHNICAL SPECIFICATIONS

Voltage| 220-240VAC,50-60Hz| Auto-Feed Shred Functions| Paper
---|---|---|---
Auto-feed Shredding Capacity(A4 80g/m’)| 110 sheets/time| Manual-Feed Shred Functions| Paper.plastic credit card, staple, clips
Manual-Feed Shredding Capacity| 12 sheets/time(A4 80g/rn’) one sheet of credit card/time| Manual-Feed Opening(L*W)| 222×3.5mm
Continuous Shred Capacity by Manual- Feed shredding paper| ;:c:10min| Shred Type| Micro cut
Continuous Shred Capacity by Auto-feed shredding paper| ;:c:3Qmin| Paper Shred Size (LxW)| 4x12mm
Product Size (Lx W x H)| 367X263X506mm| Cool down time| :,:;6Qmin

(Naturally cool down)

Will not shred : Unopened junk mail ,adhesive labels, continuous from paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted above. Manual-feed maximum recommended daily usage rates: 65 sheets, 2 credit cards

OPERATING INSTRUCTIONS

0pen the Auto-feed Supporting plate and the Auto-feed fixed rod to make the Auto-feed Connecting plate(top and bottom) straight. (when open the Auto-feed Connecting plate under straight status.there will be a voice like a click)
Make the papers tidily.
Plug in and press the power switch to ON Auto button in blue
Feed the tidy papers to “Auto-feed opening” or feed the papers to “Manual Feed Opening”.(Auto-feed opening: Max 11 O sheets Manual Feed Opening: Max 12 sheets)
When finished shredding or no need to use it ,please press “Auto button” or power switch to”o”. (Auto button light OFF )

BASKET FULL

Shredder stops to work and need to clean up the paper scraps. (Auto button in blue light with flashing)
Auto button light will be OFF , when the basket is opened.
After clean the basket and assemble the basket with shredder’s body well ,Auto button will be in blue light , Shredder is under staying working.

AUTO-FEED JAM

Pull out the jammed papers and press the REV button.( Auto button in red and blue light with flashing)
- *Suggest to separate the jam paper to re-feed.
- CAUTION Re-feed tidy paper to auto-feed, re-feed wrinkle paper to manual-feed shredding.
- *Re-feed wrinkle paper for manual-feed.
Open the Auto-feed Connecting plate lock and take out the jammed papers
- *Feed the jam paper scraps into manual-feed to shred.
Move the Auto-feed cleaning button and make the paper scraps into the basket .
Clear the jammed paper scraps and dust on the rubber wheel.
After clean up the jammed paper scraps ,move the Auto-feed Connecting plate lock and assemble the Auto-feed Connecting plate well, Shredder is under staying working status.(Auto button in blue light)

MANUAL FEED JAM

Pull out the jammed papers and press the REV button.(Auto button in red light with flashing)
- *Press REV button and FWD button for 3-Sseconds staying, if it gets a very serious jam.
- *Suggest to separate the jam paper to re-feed shredding in manual-feed.
When the Auto button is under blue light ,Shredder is under staying working status.

OVERLOAD
Auto button is under red and blue light with flashing or red with flashing, It means the “Auto-feed opening(red and blue light with flashing)” or Manual-Feed Opening(red with flashing) is over its capacities , need to take out the excess papers.

$bonsaii-C233-B-Sheet-Auto-Feed-Paper- $27$$ *Take out the excess papers and re-feed to shred.

OVERHEAT
“Auto button” is red light and Shredder stops to work , need to wait for cooling down . After the shredder cools down,”Auto button” is in blue light ,the shredder is under staying working.

PRODUCT MAINTENANCE

Plug in and feed one shredder lubricant pack to shred in Manual-feed.(Auto button in blue light)
Press REV button for 2-3 seconds staying .{don’t pull out the shredder lubricant pack)
Press REV button and FWD button to shred the lubricant pack for 3-5 seconds staying and repeat the operation for 2-3 times till the shredder lubricant pack is fully shredder.
When finished shredding or no need to use it ,please press “Auto button” or power switch to”o”. (Auto button light OFF )

CAUTION

Only use the professional shredder Lubricant pack to maintain the shredder such as Bonsaii shredder Lubricant 24-Pack (LS24) /12-Pack (LS12) .(no cleaner ,inflammable liquids ,gases oil etc … @)

TROUBLESHOOTING

**** Malfunction	**** Reason	**** Solution

Stop Working

| The power plug doesn’t connect to the power supply.| Please kindly check whether you use the machine with related supply voltage or Plug in again correctly.
Power supply voltage is too low or no power supply.| Please kindly find a related supply voltage to use it .
The machine is under overheating protection, because the machine is over the continues working capacity.| Wait for the machine to cool down naturally.
The thickness of paper is too thin.| To make the paper thicker ,You can add more papers or fold the paper.
The machine is overloading, because the paper is over machine Max shredding quantities.| Reduce paper quantity with an acceptable amount and place the paper into the feeding opening of shredder again.
Damage of power cable.| Please replace the power cable with the same parameters by professional person or contact with our customer service.
The basket is full.| Empty the basket.
Defective of machine.| Please kindly contact with our customer service.
Jam| Paper jam.| Please follow the manual and automatic paper jam troubleshooting method on page 6-8.
Keep Running| Paper dust and other foreign objects cover the sensor. The location of sensor is in the shredder’s feeding opening look like glass beads or marbles.|

Please unplug first and use soft cloth or cotton swab to clean the foreign objects without any cleaner or water .
lf there are some paper scraps around the sensor area ,please kindly use cotton swab or needle nosed pliers to take out the paper scraps .

please don’t overexert and use Sharp tools to clean or poke the sensor to avoid damaging the sensor.

Loud Noise| The shredder is placed on an unsuitable place.| Change the location.

If the above answers can not solve your problems, please kindly contact with our customer service team via email customer-care@bonsaii.com

LIMITED WARRANTY

Warranty Period: Machines are covered by a 2-year limited warranty and cutters are warranted for 2 years from the date of your original retail purchase from us. The warranty is not transferable to any subsequent purchaser or recipient of the product.
We stand by our product and offer a 30-day money-back guarantee. During this time, you could return the item without paying any extra fee if there is a manufacturing defect in it. Please rest assured that the returns are free and easy if there is a manufacturing defect. Otherwise, it would be the customer’s responsibility to cover the shipping fee. Products on sale are also returnable.
If the product isn’t meeting your expectations, please email within 30-days of receipt. We will help you to either return or exchange your product. Your original form of payment will be refunded in full once the full return is complete. After 30-days orders may be subject to a 20% restocking fee and all shipping and handling charges will be the responsibility of the customer. Additional return details are listed below. After 60-days the purchase from Bonsaii is non-refundable.
If you receive a damaged product, you must notify Bonsaii within 48 hours of delivery. Bonsaii will investigate the claim and notify the freight company about the damage. Please retain all packaging in the event that Bonsaii or the freight company needs to inspect it. These investigations may take several days but merchandise replacements will be processed as soon as possible.
For product arrived defective or damage, We’re sorry to hear that your Bonsaii product arrived in less than perfect condition. We’d like to resolve this issue right away with the help of our Customer Support Team and Quality
Assurance team. They’ll need to know a bit of information on your order as well as the issue you’re experiencing with your Bonsaii product. To report your issue, please reach out to our Customer Support team by emailing customer-care@bonsaii.com with your order number. We may need you to make a short video, or take some pictures of the defects of the product and send them to customer-care@bonsaii.com. After a preliminary analysis on the video or pictures, we will send you a brand new replacement right away if it is confirm to be defective on its arrival. If we determine that you have misrepresented Bonsaii product’s condition and that product is not defective, we will send you the right instructions and help you to use the product correctly.
In line with our policy of continuous development we reserve the right to change this product, packing and documentation specification without notice.

If you have any questions or any confusions, Please kindly contact with us

customer-care@bonsaii.com.

Disposal
Directive 2012/19/EUconcerning the handing, collection, recycling and disposal of A electrical and electronic equipment and their components (‘waste electrical and – electronic equipment’, known as WEEE).

The crossed symbol on a rubbish container indicates that the machine or device is not allowed to be disposed of but it must be handed over to a suitably equipped collection centre for proper recycling or disposal.

Directives
CE This machine corresponds to the requirements according to EU Directive 2014/ 30/EU
UK The product corresponds to the requirements according to UK Directive regulation CA technical documentation as well as the UK declaration of conformity the required UKCA marking .
The packaging materials have been selected for their environmental friendliness “\.J and ease of disposal and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.