Smartro SC93 Wireless Weather Station User Manual

Smartro SC93 Wireless Weather Station User Manual

Instruction Manual
WIRELESS WEATHER STATION
Model: SC93

1. Preface

Thank you for choosing this weather station from SMARTRO.

• Make sure to read the instruction manual carefully. This information will help you to familiarize yourself with your new device, to learn all of its functions and get advice in the event of problems.
• Following the instructions will prevent damage to your device.
• We shall not be liable for any damage that occurs as a result of not following these instructions.
• Please keep this instruction manual for future reference.

2. Attention

• Please follow the instructions for operation.
• Please use the original or manufacturer specified attachments or accessories.
• To avoid safety hazards, do not disassemble the product.
• Do not place any items on top of the product that may damage it.
• Do not place the product near a water source or in a damp place.
• Please terminate use immediately upon damage, which is caused as a result of improper use or repair by a non-factory approved technician.
• Do not place the product in places that are exposed to direct sunlight and high temperatures such as a radiator, electric heater, stove, etc.
• Keep the product away from strong electromagnetic waves, strong static electricity, or moisture and condensation.
• Children below 10 years of age should be supervised by an adult when using this product.
• Clean your device with a soft damp cloth. Do not use solvents or scouring agents.

3. Package Content

• Color Weather Station*1
• Wireless Remote Sensor*1
• DC Power Adapter*1
• Instruction Manual*1

4. Product Specification

4.1 Color Weather Station

• DST function

• Weather forecast

• Low battery indicator

• Moon phases and tides

• Sunrise and sunset time

• Time in 12/24-hour format

• Tabletop stand/wall mount

• Dual alarms with snooze function

• Perpetual calendar up to the year 2099

• Adjustable backlight and night mode

• Indoor comfort indicator and mold risk display

• Maximum/minimum temperature and humidity record

• Frost alarm and settable outdoor temperature alert

• Barometric pressure
  — Barometric pressure measurement range: 600hPa/mb to 1100hPa/mb
  (17.72 inHg to 32.48 inHg)

• Indoor & outdoor temperature
  — Indoor temperature measurement range: +14°F (-9.9°C) ~ +122°F (+50°C)
  — Outdoor temperature measurement range: -40°F (-40°C) ~ +158°F (+70°C)
  — Indoor humidity measurement range: 20%RH~95%RH
  Power supply:
  Battery: 2 x AA batteries (not included)
  DC power adapter: 5V 1.2A

• USB charger output: 5V 1A

4.2 Wireless Remote Sensor

• °C/°F switchable
• Low battery indicator
• Tabletop stand/wall mount
• 3 channels available (one sensor included)
• Power supply: 2 x AA batteries (not included)
• Range of transmission: 200 feet in an open area
• Outdoor temperature measurement range: -40°F (-40°C) ~ 158°F (+70°C)
• Outdoor humidity measurement range: 20%RH ~ 95%RH

Note:

Please choose the right battery according to the limit temperature of the wireless sensor:
Alkaline zinc manganese battery can work at -4°F (-20°C) to 140°F (+60°C).
Polymer lithium ion rechargeable battery can work at -40°F (-40°C) to 158°F (+70°C).

5. Know Your Device

5.1 Screen

A1: Indoor mold risk
A2: Indoor temperature
A3: Indoor humidity
A4: Indoor comfort indicator
A5: Sunrise time
A6: City
A7: Sunset time
A8: Month and date
A9: Time
A10: Day of the week
A11: Historical pressure histogram
A12: Tide level
A13: Moon phase
A14: Barometric pressure
A15: Outdoor humidity
A16: Alert of outdoor temperature
A17: Outdoor temperature
A18: Outdoor temperature channel and reception icon
A19: Weather forecast

5.2 Buttons

5.3 Wireless Remote Sensor

C1: Temperature
C2: Humidity
C3: Transmission signal light
C4: “°C/°F” switch button
C5: “TX” button
C6: Channel switch knob
C7: Battery compartment
C8: Wall-mount hole

6. Preparation

• Open weather station battery compartment cover, insert 2 x AA batteries, ensure correct battery polarities [ “+” and “–” ] and connect the DC adapter to power the weather station.
• The screen will light up, and the device will make a beeping sound. The weather station will start to detect indoor temperature and humidity.
• Open the wireless remote sensor battery compartment cover. Choose the same channel as the weather station through the numbered knob. Insert 2 x AA batteries, ensure correct battery polarities [ “+” and “–” ].
• The sensor will send out a red light which means that it’s sending signals to the main unit.
• The weather station will start to make a connection with the outdoor remote sensor, a reception RF antenna symbol in the “OUT” display area will flicker on the screen. This procedure will take 3 minutes at most.
• After the unit has made a connection with the outdoor remote sensor, the detected temperature and humidity will be displayed on the screen.

7. Initial Time Setup

8. Dual Alarm Setting

9. Weather Station and Remote Sensor Pairing & Manual Signal Reception

Step 1:

— Insert 2 x AA batteries in the weather station and connect it with the adapter.
— Insert 2 x AA batteries in the remote sensor.

Step 2:

— Select a channel for the remote sensor through the numbered knob (1, 2, and 3).
The indicator will light up once to indicate that the wireless remote sensor is sending out signals.
— Select the same channel with the remote sensor for the weather station. Press ” ” button to select CH1, CH2, CH3 or CH1 to CH3 (cycle mode).
－ When the weather station successfully receives signals from the remote sensor,the temperature and humidity detected by the remote sensor will display in the”OUT” column of the weather station.
－ The weather station can connect up to 3 wireless remote sensors at the sametime. If multiple sensors are used simultaneously, please make sure these sensorsare on different channels and press ” ” button on the weather station to view the readings of each channel.

9.2 Outdoor Channel Cycle Mode

This mode is applicable if multiple wireless remote sensors are used simultaneously.

－ Press ” ” button on the weather station until ” ” is displayed above the outdoor channel. In this mode, the outdoor readings will display from CH1 to CH3 automatically every 5 seconds.
－ To make the temperature and humidity on a fixed channel, just press ” ” button until ” ” disappears. Once it disappears, the outdoor readings will stop cycling.

9.3 Manual Signal Reception

If there is no outdoor temperature displayed on the weather station, or there is no change in the temperature and humidity for a long time, it indicates that the weather station is failing to receive signals from the wireless remote sensor. Please take the following actions:

－ Please ensure that the channels of the weather station and sensor are the same.
－ Long press ” ” button to receive signals manually. A flashing RF antenna symbol will be displayed beside the channel. This means that the weather station is in a receiving state.
－ Press “TX” button on the wireless remote sensor to send out signals manually, a red light will flash.

9.4 How to Check Maximum/Minimum Temperature/Humidity

• To toggle indoor/outdoor maximum, minimum temperature and humidity data, please press “▼” :
  Press once to show the maximum temperature and humidity values.
  Press twice to show the minimum temperature and humidity values.
  Press three times to return to the current temperature and humidity values.

• To reset the maximum and minimum temperature and humidity, hold “▼” button for 2 seconds, dashes will be displayed on the screen and the recorded history of indoor maximum and minimum temperature, humidity and outdoor values of current channel will be cleared away. The weather station will start to re-record the maximum/minimum values.

• To clear the maximum and minimum temperature and humidity of the other channels, press ” ” button to switch channels and repeat the steps above.

Note:

• In the case of using only one sensor, when the channel of the weather station is not the same as the channel of the sensor, there will be no outside temperature readings shown on the weather station.
• The wireless sensor can be placed anywhere (indoor or outdoor) you want to measure the temperature remotely.
• If you want to measure the outdoor temperature, place the sensor outside away from direct sunlight and rain such as under a roof or on a porch.
• If the temperature or humidity reading is below the ranges, “LL.L” will appear. If the temperature or humidity reading is above the ranges, “HH.H” will appear.
• Indoor temperature measurement range: +14°F (-9.9°C) ~ +122°F (+50°C)
• Outdoor temperature measurement range: -40°F (-40°C) ~ +158°F (+70°C)
• Indoor humidity measurement range: 20%RH~95%RH

10. Temperature & Humidity

10.1 How to Set Temperature Alert

10.2 Frost Point Alert

When the outdoor temperature reaches +30.2°F (-1.0°C) ~ +37.3°F (+2.9°C), the frost alert will be automatically activated and the icon ” ” will be flashing.

10.3 Comfort Indicator & Mold Risk

• Indoor comfort level is generated based on the indoor temperature and humidity, there are 5 levels as follows:

• The mold risk level is generated based on the indoor temperature and humidity.
  There are 4 levels: HI (high), ME (medium), LO (low) and no risk (no display).

10.4 Temperature & Humidity Trend

The weather station monitors the current temperature and humidity change.

11. Weather Forecast

11.1 Weather Forecast Statement

• The weather station calculates the weather forecast based on the historical recorded barometric pressure where you are located.
• The weather forecast cannot be compared with the professional weather services supported by satellites and high-performance computers.
• If the weather information on the device is different from the local weather forecasting service, please take the advice of the latter as authoritative.

11.2 The Symbols of Weather Forecast

Note:

When the pressure change causes a rainy prediction, and the outside temperature is below +24.8°F (-4°C), the snow icon appears.

12. Moon Phase & Tide Indicator

When the calendar has been set, the weather station will display 3 tide levels and 12 different moon phases: New Moon, Waxing Crescent, First Quarter, Waxing Gibbous, Full Moon, Waning Gibbous, Last Quarter, Waning Crescent.

13. Air Pressure

The barometric pressure updates every hour. The weather station will record the pressure of the last 3, 6, 9, 12, 18, 24 hours and compare it with the current barometric pressure to generate a histogram.

14. Backlight & Night Mode

14.1 Backlight Setting

— When connecting the weather station with the DC adapter, the backlight will remain on. The backlight has 5 brightness levels for selection: level 1, level 2, level 3, level 4 and OFF. To adjust the backlight brightness, press ” ” to choose a brightness that is comfortable for you.
— When the backlight brightness is not at the maximum brightness, touching ” ” can make the backlight light up to the maximum brightness for 15 seconds.
— Any restart or power break will cause a loss of the previous manual settings. In case of power failure, please insert 2 AA batteries in the weather station to protect saved manual settings.

Note:

• The power of the batteries is not enough to support the dynamic lighting of the large display. It is recommended to connect the weather station with the DC adapter.
• When the weather station is only powered by batteries, touching ” ” will temporarily activate the backlight for 15 seconds, after which the screen will return to the dimmest brightness level and enter power-saving mode.

14.2 Night Mode Setting

In night mode, the backlight will automatically dim at the set entry time.

• The minute of the exit time of night mode will be flashing, press “▲” or “▼” to set the required minute and press ” ” to confirm. After completing these steps the weather station will return to the original display.

Note:

• When night mode is on, the icon ” ” will be displayed on the screen. When reaching the set night mode entry time, the backlight will automatically get dim according to the set night mode brightness, and when reaching the set night mode exit time, the backlight will return to the original brightness.
• When night mode is off, the screen will be on constantly.
• In night mode, the backlight can be switched to the highest brightness for 15 seconds by touching ” “.
• During setup, if you want to exit it, just double click ” ” and the weather station will save the current settings and return to the display.

15. City Setting for Sunrise & Sunset Time

16. Low Battery

• If the battery icon ” ” is displayed in the “INDOOR” column, it means that the weather station batteries are running out. Please replace the batteries as soon as possible.
• If the battery icon ” ” displays in the “OUTDOOR” column, it means that the remote sensor batteries are running out. Please replace the batteries as soon as possible.

17. Troubleshooting

18. After-sales Support

If your device fails to work despite these measures or your experience with us was less than perfect in any way, please do not hesitate to contact us.
For more products, please visit our website: https://www.smartro.co/
For further support and discount information, join our Facebook group or follow us on Instagram.

Phone: +1(323)287-5798
E-Mail: support@smartro.co
Facebook : http://bit.ly/smartro_01
Instagram: smartro_01

19. Waste Disposal

• This product is manufactured with high-grade materials and components which can be recycled and reused.
• As a consumer, you are legally required to take them to your retail store or an appropriate collection site depending on national or local regulations in order to protect the environment.
• The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury, Pb=lead.
• Please do not dispose of this instrument in household waste.
  The user is obligated to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal.

Appendix 1: City Code of the United States

Appendix 2: City Code of other Countries

DOWNLOAD

Smartro SC93 Wireless Weather Station User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>