SMARTRO ST54 Digital Meat Thermometer User Manual

: June 16, 2024
: SMARTRO

Table of Contents

SMARTRO ST54 Digital Meat Thermometer
Product Specification
Key Introduction
Quick Temperature Setting
Manual Temperature Setting
Use & Maintenance
Troubleshooting
After-sales Support
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SMARTRO ST54 Digital Meat Thermometer

Thanks for purchasing our SMARTRO ST54 meat thermometer.

Before You Start Using it:

Make sure to read the instruction manual carefully before using it. Please keep this instruction manual for future reference.

warning

Avoid Probe with: $SMARTRO-ST54-Digital-Meat-Thermometer-fig- $1$$

DO NOT expose the probe to open fire(flame) or other objects with a temperature exceeding 482°F, otherwise the probe or the unit will be damaged. If the probe or the unit is damaged, please buy a new probe to replace or contact us via email/phone.
We DO NOT recommend that using this leave-in-style probe for high heat grilling, since flare-ups temperature can be over 1000°F which will damage the probe. If still use ii in a high heat situation, please separate probe and cable from flare-ups, grill lids, grill grates or other hot spots with high temperature over 482°F.

Product Specification

Probe Range: -58°F to 572°F (-50°C to 300°C)
Unit Measurement Range: 32°F to 482°F (0°C to 250°C)
Timer Range: Countdown settable to 999 MIN, 59 SEC.
Unit: °C/°F switchable
Power Supply: 2 x AAA batteries

Key Introduction

Part A- LCD

A 1: Meat indication
A2: P1 Temperature indicator & Timer indicator A3: P2 Temperature indicator
A4: “P1/P2” button
A5: “Min /UP” button
A6: “Sec /DOWN” button
A7: “MeaUStart/Stop” button

Part B-Button

81: Magnet
82:Power off
83: Timer mode
84: Cook mode
85: Battery compartment
86: Hanging hole
87: °C/°F switchable
88: Retractable stand

Table stand

There is a stand on the back of the thermometer. Open ii to make the device stand on the table.

$SMARTRO-ST54-Digital-Meat-Thermometer-fig- $4$$

Quick Temperature Setting

Open the battery compartment and insert two new 1.5V AAA batteries (not included), ensure that the battery polarities are correct, close the battery compartment.
Set the switch on the back of the thermometer to “COOK”. You will hear a “di di di” sound. The thermometer is converted to standard mode.
Plug the probes into the device socket to get ready for using ii. (Note: if cooking temperature exceeds or falls below the measurable ranges, the LCD screen will display the following letters: HHH for temperatures above range and LLL for temperature below range.)
Press button to select either P1 or P2. The selected probe will be displayed in the upper left corner of the product screen.
Press button to choose food types and doneness levels. There are 7 selections, as shown in the following figure.
| BEEF WELL| BEEF MEDIUM|

BEEFRARE FISH

|

HAMBURGER

|

PORK

|

CHICKEN

| PROGRAM SETTING
---|---|---|---|---|---|---|---

Display

| | | | | | |

Well

|

n ° c

170°F

|

71°c

160°F

|

63°c

145°F

|

71°c

160°F

|

n ° c

170°F

|

74 °c

165°F

|

0°C-250°C

32°F-482°F

When the cooking temperature is equal to or higher than the set temperature, the alarm will beep. You could press any button on the LCD screen to pause the beep for 30 seconds. If the probe remains in the cooking food, the alarm will beep again when the cooking temperature reaches the set temperature. To turn off the alarm, please pull out the probe to end the temperature measurement.
( Note: To avoid overcooking caused by customers’ forgetfulness, the alarm can’t be completely turned off by pressing a button.)

Manual Temperature Setting

Set the switch on the back of the thermometer to “COOK”.
To customize the alert temperature, press button to select either P1 or P2.
Press button once, will be displayed on the screen. Continue to press button until it shows (I,.
Press and button to set desired alert temp( stands for+, stands for -). When alert temperature stops flashing, the thermometer ends custom temperature setting.
Quick setting: Press and hold the or button for fast temperature setting. Release the or button to stop the quick setting.

Countdown Timer

Set the switch on the back of the thermometer to “TIMER”.
Press button to set the minutes and button to set seconds. If you need to reset the time, press and button at the same time to clear it.
Quick setting: Press and hold the or button for fast minutes or seconds setting. Release the or button to stop the quick setting.
When the timer setting is completed, press button to turn on the countdown function, countdown to 00MIN:00SEC.
You can pause the timer when it is running by pressing button. Press button again to restart the timer. When the timer pauses, if you want to clear the timer, you can press and at the same time to clear it.
The alarm will sound and the LCD screen will flash when countdown is completed. Press any button to stop the timer alarm.

Countup Timer

Set the switch on the back of the thermometer to ” TIMER “
In alarm mode, when it displays 00: 00, press button to start count up timer. Press it again to pause the timer. The alarm will sound when it is reaching 999 MIN:59 SEC.
When the timer pauses, if you want to clear the timer, you can press and at the same time to clear it.

Use & Maintenance

Always wear a heat resistant glove or an oven mitt when touching the metal probe during or just after cooking.
Keep the probe away from children.
Sterilize the probe each time before use. Keep it clean with a damp cloth, DO NOT wash in a dishwasher or use abrasive materials.
DO NOT expose the thermometer to water, direct heat, a hot surface or direct sunlight for an extended period of time.
DO NOT mix old batteries and new batteries or batteries with different brands. We recommend you to use genuine alkaline batteries.

Troubleshooting

Issue

| ****

Reason

| ****

Solution

---|---|---
| The measuring temperature exceeds 482°F (250°C) multiple times which results the main unit being damaged.| Please contact us for support or buy a new one. Please use the main unit within normal work temp range 32°F to 482°F (0°C to 250°C).
The measuring result is too low or too high.| The probe is exposed to open fire(flame) or probe temperature is| Please buy a new probe to fix it or contact us via email/phone.
| higher than 572°F (300°C) which results probe being damaged.| DO NOT expose the probe to open fire(flame) or other objects with high temperature over 572°F (300°C).

Inaccurate temp reading.

| The probe was damaged due to the extremely high temperature.| Please contact us for support or buy a new probe.

The cook temp displays

“HHH”.

| ****

The measuring temperature exceeds 482°F (250°C).

The probe is not plugged in completely.

| ****

Take out the probe from high temperature place at once and cool it down, only use this thermometer within normal work-temp range 32°F to 482°F ( 0°c to 250°C).

Unplug the probe and re-insert probe into the
thermometer completely.

The cook temp displays “LLL”.

The measuring temperature is below 32°F (0°C).
The probe socket is damaged.
Unplug the probe and re-insert probe into the thermometer completely.
Take out the probe from low temperature at once, and then only use this thermometer within normal work-temp range 32°F to 482°F0°C to 250°C).

The cook temp displays| The probe is not plugged in completely.| Unplug the probe and re-insert probe into the thermometer completely.
---|---|---

Can’t stop the alarm.

| The alarm can only be temporarily paused for 30 seconds by pressing any button on the LCD screen while cooking.|

Pull out the probe from the cooking food to end the temperature measurement and stop the alarm.

If the probe remains in the cooking food, the alarm will beep again when the cooking temperature reaches the set temperature.

After-sales Support

Please contact us if your device fails to work despite these measures or your experience with us is less than perfect in anyway. Or Join our lnstagram or Facebook group for more support and discount information.

+1(323)287-5798
[email protected]
http://bit.ly/smartro_01
smartro_01

Website: https://smartro.co/

FREQUENTLY ASKED QUESTIONS

What is the brand of the digital meat thermometer, and what is its model number?

The brand of the digital meat thermometer is SMARTRO, and its model number is ST54.

What special features does the SMARTRO ST54 Digital Meat Thermometer have?

The SMARTRO ST54 Digital Meat Thermometer features a dual probe, preset, and custom temperature settings, backlit LCD display, bracket and magnet for convenient placement, commercial-grade waterproof probes, timer mode, and wide applicability for various cooking purposes.

What age range is described for the SMARTRO ST54 Digital Meat Thermometer?

The age range described for the SMARTRO ST54 Digital Meat Thermometer is Adult.

What materials are used in the outer construction of the SMARTRO ST54 Digital Meat Thermometer?

The outer construction of the SMARTRO ST54 Digital Meat Thermometer is made of Stainless Steel and Plastic.

What type of display does the SMARTRO ST54 Digital Meat Thermometer have?

The SMARTRO ST54 Digital Meat Thermometer features a digital display.

What care instructions are provided for the SMARTRO ST54 Digital Meat Thermometer, and why?

The care instructions for the SMARTRO ST54 Digital Meat Thermometer state Do Not Soak. This indicates that the thermometer should not be submerged in liquid to prevent damage.

How many units are included in the SMARTRO ST54 Digital Meat Thermometer package?

The SMARTRO ST54 Digital Meat Thermometer package includes 1 unit.

What is the power source for the SMARTRO ST54 Digital Meat Thermometer, and how many batteries does it require?

The SMARTRO ST54 Digital Meat Thermometer is battery-powered, requiring 2 AAA batteries.

What is the length of the SMARTRO ST54 Digital Meat Thermometer?

The SMARTRO ST54 Digital Meat Thermometer has a length of 3.5 inches.

What is the upper temperature rating for the SMARTRO ST54 Digital Meat Thermometer?

The upper temperature rating for the SMARTRO ST54 Digital Meat Thermometer is 482 degrees Fahrenheit.

What is the response time of the SMARTRO ST54 Digital Meat Thermometer?

The response time of the SMARTRO ST54 Digital Meat Thermometer is 500 milliseconds.

Is the SMARTRO ST54 Digital Meat Thermometer reusable, and what is its reusability status?

Yes, the SMARTRO ST54 Digital Meat Thermometer is reusable.