ALLMATIC FOR4 Allo Remote Control Gate Opener User Manual

ALLMATIC FOR4 Allo Remote Control Gate Opener

Product Information

• The product is a remote control device with the model number FOR4. It operates at a frequency of 433.92 MHz and has a transmit power of less than 1 mW. The remote control uses a rolling code system for secure communication. It requires a 12V alkaline type A27 battery for power.
• The remote control has four channels or buttons labeled CH1, CH2, CH3, and CH4. It supports multiple language options, including Italian (ITA), English (ENG), French (FRA), Spanish (ESP), and Dutch (NLD).

Product Usage Instructions

1. To access the hidden button, you need to remove the front cover of the remote control. Follow these steps:
2. Using a screwdriver, remove the screw (A) located on the remote control.
3. Gently remove the front cover of the remote control.
4. WARNING: Before using the hidden button, make sure to disconnect the power supply to the receivers on which you do not want to take any action.
5. To use the hidden button:
6. Pressing the hidden button will activate the memory in ALL receivers where it was previously learned.
7. Make sure to remove power supply from the receivers that you do not want to be affected by pressing the hidden button.
   It is important to follow these instructions carefully to avoid any unintended actions or interference with receivers.

PRODUCT SPECIFICATION

• Model FOR4
• Frequency 433,92 Mhz
• Irradiated power < 1 mW
• Type Rolling Code
• Power supply Batteria a 12V di tipo A27 alcalina A27 alkaline type 12V battery
• Channels 4

DANGER

• These devices are intended for equipment such as door openers, gate openers, shutter openers. The equipment must be used exclusively for the purpose for which it was designed. Any other use is considered improper and therefore dangerous. The manufacturer shall not be liable for any damage caused to persons, property or animals by the misuse or failure of the radio control.
• Keep children away from control devices. Do not let children and animals play or stay near the automation.
• Do not leave the remote control near heat sources or immerse it in liquids of any kind.
• Keep new and used batteries out of the reach of children.
• If the battery compartment does not close tightly, stop using the product and keep it out of the reach of children.
• If you suspect that the batteries have been swallowed or inserted into other body orifices, seek medical attention immediately.
• Use only batteries of the type indicated. Risk of explosion if the battery is replaced with a wrong type.
• The data included in this manual have been compiled and verified with the utmost care, however the manufacturer can not assume any responsibility for any approximations, omissions or limitations due to technical or graphic requirements.
• The technical specifications in this document may be subject to change without notice.
• The manufacturer’s warranty is valid by law from the date printed on the product and is limited to the free repair or replacement of parts recognized by the manufacturer as defective due to lack of essential qualities in the materials or for errors in the production process. The warranty does not cover damage or defects due to external agents, lack of maintenance, overload, normal wear, installation error, or other causes not attributable to the manufacturer. Tampered products will not be covered by warranty. The manufacturer is not responsible for malfunctions or degradation of performance due to environmental interference, such as electromagnetic disturbances; therefore, the warranty expires in these situations.

DISPOSAL

• As for installation operations, the disassembly of this product must be carried out by qualified personnel. The symbol on the side indicates that the product should not be disposed of as unsorted waste, but should be sent to separate collection facilities for recovery and recycling. For disposal check the recycling or disposal systems provided by the territorial regulations in force for this category of product, or return the product to the seller.
  WARNING

  • This product consists of various types of materials: some parts of the product may contain pollutants or dangerous substances that, if dispersed, could cause harmful effects to the environment and health.
  • Local regulations may provide for heavy penalties in the event of incorrect disposal of this product.

PRODUCT OVERVIEW

PROGRAMMING A NEW REMOTE CONTROL

• Activate the learning procedure on the receiver (refer to the receiver manual).
• Press the button on the new remote to learn.
• Wait for confirmation of learning on the receiver.

HIDDEN BUTTON (B)
To access the hidden button remove, with the help of a screwdriver, the screw (A) and then remove the front cover of the remote control.
WARNING
USE OF THE HIDDEN BUTTON
Pressing the hidden button opens the memory in ALL receivers where it was previously learned. Before using the hidden button, remove power supply to the receivers on which you do not want to act.

ADDITION OF A NEW EXISTING REMOTE CONTROL

• Approach the receiver where you want to add a new remote control.
• Press the hidden button (B) of the existing remote control (already programmed).
• Press the new remote to learn.
• Wait for confirmation of learning on the receiver.

CANCELLATION OF A SINGLE REMOTE CONTROL

• Verify on the receiver manual that this procedure is compatible with the receiver in use.
• Approach the receiver where you want to remove the remote control.
• Press the hidden button (B) of the existing (already programmed) remote to remove.
• Press the hidden button (B) and the CH1 button on the remote to remove at the same time.
• Wait for confirmation of learning on the receiver.

BATTERY REPLACEMENT

• Remove the screw (A) with a screwdriver.
• Remove the front cover.
• Remove the old battery and insert a new 12V alkaline A27 battery, respecting the polarity.
• Close the front cover and screw (A) into the back cover.

EC and UK Declaration of Conformity

• The manufacturer, ALLMATIC s.r.l. declares that the type of FOR4 radio equipment complies with the essential requirements laid down by:

• EC Directive
  RED Directive 2014/53/UE

• UK Regulations
  Radio Equipment Regulations 2017. The remote control also complies with the standards EN IEC 62368-1:2020+A11:2020+AC:2020 and IEC 62368-1:2018+COR1:2020 regarding the health and safety of users. The declaration in its full format is available for consultation with the manufacturer.

ABOUT COMPANY

• ALLMATIC S.r.l
• 32026 Borgo Valbelluna – Belluno – Italy
• Via dell’Artigiano, n°1 – Z.A.
• Tel. 0437 751175 – 751163 r.a.
• Fax. 0437 751065
• E-mail: info@allmatic.com
• www.allmatic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>