Easywelcome EW-E-EIAG Intelligent Air Guard User Manual

Easywelcome EW-E-EIAG Intelligent Air Guard

PLEASE READ THE INSTRUCTION CAREFULLY BEFORE USING THE PRODUCT THANK YOU FOR PURCHASING AND USING OUR INTELLIGENT AIR GUARD. S. FOR YOUR SAFETY AND INTERESTS, PLEASE READ THE PRODUCT MANUAL CAREFULLY BEFORE USING THE PRODUCT. THE COMPANY WILL NOT BE LIABLE FOR ANY PERSONAL INJURY, PROPERTY, OR OTHER LOSS CAUSED BY YOUR FAILURE TO FOLLOW THE INSTRUCTIONS OR FOLLOW THE PRECAUTIONS.

Warning!
This product does not belong to the category of medical devices. This product does not have a waterproof function, do not be exposed to a drip or splash leakage environment. This product will emit a pungent odor when ozone mode is working. Please use it after personnel leave. This product is not suitable for the use environment of easy oxidation explosion.

Operation guide

1. Device host: l set
2. Power cable: l pc
3. WIFI Antenna: l pc
4. Operation manual: 1 pc

Product parameters

Product structure

1. Switch & mode Indicator
2. WIFI button & status indicator
3. Ozone vent
4. WIFI antenna
5. Anion vent
6. AC power socket

Operation guide

Preparatory work before starting the machine

• Mounting antenna

• AC power cable connecting

• Download the app

Please use your mobile phone to scan the above QR code to download and install the app.

APP login
After downloading, enter the APP. The login interface is as follows:

• Click Start now

• Login and register at the same time

• If this is your first time using our product, you will see these.

Power on & Power off

Position refers to the switch button and status indicator. When the device is powered on, long press this button for power on and power off.

Status indication

stand by

| Purification mode| Disinfection mode|

Power off

---|---|---|---
Blue light| Greenlight| ed light| No light

Network configuration

Remark: the target wifi network to which the device connects must be the same as the one your smartphone connects to when you configure the wifi network to the device. After configuration, the network of your smartphone can be different from the device.

Step l:
Click add device, set a name for device customization, and click Next to set network configuration.

Step 2:
Select”Allow While Using App” and enter the correct wifi password, then long- press WIFI button until hearing the voice of “Starting network configuration” and a flashing green light. Then click “Configure” in the APP and wait for automatic network distribution.

Step 3:
Waiting for the success of connecting the network, the page is as follows. After the network configuration is successful, the wifi button indicator light flashes slowly on the green light.

Step 4:
After successful registration binding, enter the operation interface.

1. Device List
2. TVOC monitoring
3. Custom Scene
4. Switch on the purification mode
5. Voice control
6. Add the device
7. Temperature and humidity monitoring
8. Switch on the disinfection mode

Function description

Air Purification Mode

After successful WIFI network configuration, the default mode is purification mode, this mode can be always opened if needed.

Ozone Disinfection Mode

You can enter disinfection mode by pressing the Ozone button, LED of the front button is red after changing to disinfection mode successfully. Remark: The max working time of disinfection mode is 30min, the device must be changed to another mode at least 1 hour after running 30 minutes constantly

Custom Scene
You can press the “custom scene” button to define your working mode according to different application scenes.

The work process of custom scenes

Exit custom scene

Pressing the “purification” or “Ozone” button to enforce the exiting current mode.

Voice control

You can voice control the device with voice buttons, such as “Turn on purification mode” and “turn off ozone mode.”

FQA

• If the distribution network is unsuccessful, please check the following points
  • Please make sure that the mobile phone you are using has the corresponding permission;
  • Please make sure the AP connecting to your smartphone and Device is the same.
  • Please make sure that the network distribution button of Air Guard is pressed;
  • Please make sure whether the target connection network can connect to the external network;
• When the mobile phone fails to connect to the hotspot, please check the following points:
  • Please make sure to use one smartphone as AP, using another smartphone to configure a network. B. After the configuration is successful, the smartphone using as AP can be used to control the device.

Power off and re-connection
The device will be auto-connected to WIFI which it connected to before after powering off and restarting based on the initial network configuration successfully.

Three guarantees for EW intelligent air guardian

Maintenance record of disinfection machine

Maintenance Record Of Disinfection Machine

About the product specification

The copyright, trademark, and brand name of the specification belong to our company; The actual product shall prevail. If the product is upgraded or changed, please follow the information on the official website without prior notice If you have any objection to any contents or terms of the manual, please submit a written objection to us within seven days after purchase. Otherwise, you shall be deemed to have agreed to understand and accept all contents of the manual.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>