QUOIZEL LWS7317A 3 Light Pendant User Manual
- June 17, 2024
- QUOIZEL
Table of Contents
QUOIZEL LWS7317A 3 Light Pendant
Product Information
Specifications
- Crossbar Assembly: 1pc
- Wire Connector: 3pcs
- Outlet Box Screw: 2pcs
- Quick Link: 2pcs
- Ceiling Canopy: 1pc
- Fixture Chain: 1pc
- Fixture loop Assembly: 1pc
- Decorative Part: 3pcs
- Fixture: 1pc
Frequently Asked Questions
- Q: What should I do if my bulbs are not lighting up?
- A: If your bulbs are not lighting up, try replacing the light bulb with a new one.
ITEM ARTICLE: 5336493
MODEL: LWS7317A
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
- Before beginning assembly of product, make sure all parts are present.
- Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
LIGHT SOURCE
- 3 BULBS REQUIRED (SOLD SEPARATELY)
- Please check with bulb manufacturer for dimming capabilities.
BULB BASE TYPE
- MEDIUM
- (E26)
BULB SHAPE
- TYPE S
BULB COMPARISON
PACKAGE CONTENTS AND TOOLS REQUIRED
TOOLS REQUIRED
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY | Stock Part# |
|---|---|---|---|
| A | Crossbar Assembly | 1pc | 916143KIT |
| B | Wire Connector | 3pcs | |
| C | Outlet Box Screw | 2pcs | |
| D | Quick Link | 2pcs | |
| E | Ceiling Canopy | 1pc | |
| F | Fixture Chain | 1pc |
M381CHTMBK
G| Fixture loop Assembly| 1pc| N/A
H| Decorative Part| 3pcs
I| Fixture| 1pc
Installation Instructions
- If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly.
- Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut.
- Screw the nipple in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.
- A. Adjust fixture chain length.
- B – C. Install fixture chain.
- A – Pull the supply wires and ground wire up through the fixture chain alternating links.
- B – Push the ends of the supply wires and ground wire up through the loop and into the outlet box.
- C – Remove the canopy.
- D – Push the remaining slack wire into the outlet box.
- Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box.
- Separate the smooth side and ribbed side of supply wire.
- Using wire strippers, strip each wire 1/2 inch from the end.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster.
- Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
---|---|---|---
Bulbs will not light.| 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
| 1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
|
Fuse blows or the circuit breaker trips when light is turned on.|
Crossed wires or power wire is grounding out.|
Check wire connection.|
MADE IN CHINA
Contact
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and
click on Contact Us.
- 1-844-564-3055
- E-mail:cs@quoizel.com