somfy SDN PowerConnect Surface Mount Panel Instruction Manual
- June 15, 2024
- somfy
Table of Contents
somfy SDN PowerConnect Surface Mount Panel Instruction Manual
Power Panel – General:
a. Compatible with Somfy’s line of 24V DC tubular motors:
-
1. SDN (Somfy Digital Network™) – Integrated RS485 -
RTS (Radio Technology Somfy®) – Integrated RF
-
24V DC outputs are Class 2 per NEC table 11(B)
b. Power Panel can be surface- or flush-mounted
c. Indoor use only
d. Dimensions: -
Cover: 12″ (W) x 12″ (H)
-
Enclosure: 12″ (W) x 12″ (H) x 4″ (D)
e. Knock-outs, concentric for conduit, 5 total -
C & G: 0.75″ (1″)
-
D & F: 0.5″ (0.75″)
-
E: 1″ (1.25″)
f. SDN Motor cable available -
Non-plenum #9020126 (US), #9020452 (CA)
-
Plenum #9020127 (US), #9020453 (CA)
Mechanical Details
Mounting Directions
Mounting holes on back of box. Use appropriate fasteners for the surface you are mounting to.
Line Voltage Warning:
WARNING:
- ONLY A LICENSED ELECTRICIAN IS AUTHORIZED TO CONNECT INCOMING POWER AND ENERGIZE THE CIRCUIT.
- INSTALLATION MUST FOLLOW ALL LOCAL AND NATIONAL ELECTRICAL CODES.
Motor Connections:
V+, V- 24V DC Power to motor (RTS motors only use these 2 connections)
+, – RS485 Communication
G RS485 Signal ground
Refer to motor instructions for further information
*Optional oversized cover available, #9800383
Connect existing SDN devices to the board’s device port using an RJ45 adaptor, 2 included.
© Somfy Systems, Inc. • OCTOBER 2023
All brands, products, and trademarks are the property of their respective
owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>