raya SB-RGB-V3 Brite Stix RGB LED Wand User Manual

raya SB-RGB-V3 Brite Stix RGB LED Wand

Specifications

• Product Name: SB-RGB-V3
• Product Type: BRITE STIX RGB LED WAND WITH REMOTE
• Length : 15 inches
• Color Temperature Range : 3000 K (warm) to 6000 K (cool)
• Operating Modes : Color Temperature, Color Wheel Hue Selection, 12 Animated Effects

Product Usage Instructions

• Charging the Battery
  Remove the protective cover from the USB charging port and connect the Brite Stix to a powered USB port using the included cable. The charging indicator will flash while charging and stay on when fully charged.

• Battery Power Indicator
  The power indicator blinks when the Brite Stix is powered on, after a color change, or brightness adjustment. Rapid blinking during power on or charging indicates battery power remaining.

• Mounting the Light
  Screw the Brite Stix onto a tripod, light stand, or ball head using the 1/4-20 mounting socket until secure.

• Powering On and Off / Mode Selection
  Note : The remote’s On and Off buttons function only when the Brite Stix is powered on. The remote does not power on/off the Brite Stix but sets it to sleep mode. Refer to Remote Operation below.

Operation Modes

• CCT Mode (Color Temperature)
  Adjust color temperature between 3000 K (warm) to 6000 K (cool) using the CCT+ and CCT- buttons.

• Effects (FX) Mode
  Select from 12 preloaded effects including Candlelight, Lightning, Paparazzi, Red Light Blink, Police Car, Fire Truck, and Ambulance using the FX+ and FX- buttons.

THANK YOU FOR CHOOSING RAYA
The Raya RGB Brite Stix LED wand provides even illumination along its 15-inch length. It’s extremely simple to operate, and it packs up in its own carry bag so it can go anywhere for shooting photos, streaming video, or creating YouTube content. This fixture features three operating modes, which let you set the color temperature, select a hue from the color wheel, and operate one of the twelve animated effects.

PRECAUTIONS

• Please read and follow these instructions, and keep this manual in a safe place.
• Keep this unit away from water and any flammable gases or liquids.
• Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Raya will not be responsible for any damage.
• Handle the unit with care.
• Do not stare directly at the lights when they are powered on.
• Clean the unit with a soft, dry cloth.
• Keep this unit away from children.
• Use only parts provided by the manufacturer.
• Make sure the item is intact and that there are no missing parts before use.
• All images are for illustrative purposes only.

FEATURES

• Built-in rechargeable lithium-ion battery
• 3000 to 6000 K white-balance settings
• CCT, RGB, and Effects operating modes
• 15 in. illumination area
• Adjustable brightness
• 1/4-20 socket for tripod mounting
• Remote included

BOX CONTENTS

• Brite Stix RGB LED Wand
• Remote
• Wrist strap
• USB charging cable
• Carry bag
• User manual

OVERVIEW

Light

1. LED panel with built-in diffuser

2. Handle

3. USB charging port

4. 1/4-20 mounting socket

5. Power indicator

6. Power button/ mode selector

7. Brightness/Adjustment buttons
   Remote
   

8. On/Off buttons

9. Brightness +/− buttons

10. CCT+/CCT− buttons

11. RGB+/RGB− buttons

12. FX+/FX− buttons

13. Color temperature presets

14. Red/Green/Blue buttons

15. Battery lock

16. Battery tray

CHARGING THE BATTERY

Remove the protective cover from the USB charging port, and connect the Brite Stix to a powered USB port with the included cable. The charging indicator will flash while the battery is charging, and it will remain on when the battery is fully charged.

BATTERY POWER INDICATOR

• The power indicator blinks when the Brite Stix RGB is powered on, and after a color change or brightness adjustment.
• When the Brite Stix is first powered on and during charging, the indicator rapidly blinks to indicate the percentage or battery power remaining.
• If the indicator blinks once every flash, the battery has less than 25% of its power remaining. It will blink twice for 25%–50%, three times for 50%–75%, and four times for 75%–100%.

MOUNTING THE LIGHT

• The Brite Stix has a 1/4-20 mounting socket. Screw the light onto the threaded screw of a tripod, light stand, or ball head, until it’s secure.

POWERING ON AND OFF / MODE SELECTION

• Turn on the Brite Stix by pressing the power button. It will recall the most recent setting.
• Repeatedly press the power button to select CCT, RGB, or FX mode.
• Press and hold the power button to power off.

Note : The remote’s On and Off buttons work only when the Brite Stix is powered on. The Brite Stix cannot be powered on or off by the remote. The remote sets the Brite Stix to sleep mode. See Remote Operation below.

OPERATION MODES

CCT Mode
CCT mode lets you set the wand’s color temperature. The Brite Stix has a color temperature range of 3000 K (warm) to 6000 K (cool).

• Repeatedly press the power/mode selection button to select CCT mode.
• Press the buttons repeatedly to adjust the color temperature in 100 K increments.
• Press and hold the buttons to adjust the brightness.

RGB Mode
In RGB mode, the Brite Stix glows a constant color. You can select 39 hues from around the 360° color wheel.

• Repeatedly press the power/mode selection button to select RGB mode.
• Press the buttons to change the RGB hue in 9° increments around the 360° color wheel.
• Press and hold the buttons to adjust the brightness.

Effects (FX) Mode
The Brite Stix comes with 12 preloaded selectable effects, described below.

• Repeatedly press the power/mode selection button to select FX mode.
• Press the buttons to select one of the 12 effects.
• Press and hold the buttons to adjust the brightness of select effects.

List of Effects

• Candlelight : Simulates the light from a flickering candle.
• Lightning: Random short and long bursts of bright white light that simulate lightning.
• Paparazzi: Short and long bursts of bright white light at random intervals that simulate flashes from multiple cameras.
• Red Light Blink: Red light repeating pattern of long and short flashes.
• Police Car: Repeating pattern of short bursts of red light that simulate flashing police car lights.
• Fire Truck: Repeating pattern of short bursts of blue light that simulate fire truck emergency lights.
• Ambulance: Short bursts of alternating red and blue lights that simulate ambulance emergency lights.
• RGB Slow Loop: Cycles through 3-second pulses of alternating red, green, and blue light.
• RGB Fast Loop : Cycles through half-second pulses of alternating red, green, and blue light.
• Quiet 1 and Quiet 2: Quiet 1 and 2 display complementary colors that are approximately 180° apart on the color wheel. Quiet 1 can be adjusted from red to yellow, and Quiet 2 from green to blue. Press and hold the buttons to change the color. Changing the color of one of the Quiet effects automatically changes the other.
• Disco : Short bursts of random colors that simulate the lights in a dance club.

REMOTE OPERATION

• ON/OFF Buttons: Once the Brite Stix is powered on via the on-handle power button, press the remote’s OFF button to activate sleep mode. Press ON to resume operation.
• Brightness +/− Buttons: Press and hold the Brightness +/− buttons to adjust the brightness in CCT, RGB, and select Effects modes.
• CCT+/CCT− Buttons: Active only when the Brite Stix is in CCT mode. Press the buttons repeatedly to adjust the color temperature in 100 K increments. Press and hold the buttons to rapidly scroll to the desired color temperature.
• RGB+/RGB− Buttons: Press the buttons repeatedly to adjust the hue in 9° increments. Press and hold the buttons to rapidly scroll through the color wheel.
• FX+/FX− Buttons: Press the buttons repeatedly to scroll through the 12 effects.
• Color Temperature Presets: In CCT mode, these buttons will rapidly set the color temperature at 3000, 4400, and 6000 K (warm, neutral, and cool). Once the color temperature is set, press the CCT+ or CCT− buttons to fine-tune the color temperature.
• Red/Green/Blue Buttons: In RGB mode, these buttons will set the light to red, green, or blue presets. Once the preset color is selected, use the RGB+ and RGB− buttons to fine-tune the hue.

REPLACING THE BATTERY

The remote is powered by a CR2025 battery.

To replace the battery, follow these steps:

1. Press in the battery lock, and slide the battery tray out of the remote.
2. Remove the old battery, and replace it with a new battery in the correct orientation, indicated by the illustration on the back of the remote.
3. Push the battery tray in until it locks into place.

SPECIFICATIONS

Light Fixture

Color Temperature| 3000 to 6000 K
Color Accuracy| CRI: 97.2 (5750 K), 95.8 (3000 K)
Standard| TLCI: 99 (5750 K), 98 (3000 K)
Light Intensity @ 3 ft.| 431 lx (5750 K),

381 lx (3000 K)

LED Count| 126
Cooling System| Passive
Dimming| Yes
Display| None
Housing Material| Aluminum, plastic
Dimensions| 21.7 × 1.25 × 1 in.
(L × W × D)| (55.1 × 3.2 × 2.5 cm)
Weight| 12.2 oz. (347 g)
Mounting

Fixture Mount| 1/4-20 socket
Remote Operation

Remote Control Type| IR
Wireless Range| 23 ft. (7 m)
Power

AC Input| 5 V / 2 A DC
Power Source| Light: Li-ion battery Remote: CR2025 3 V

battery

Max Power Consumption| 10 W
Cable

Cable Type| USB Standard-A to Type-C®
Cable Length| 22 in. (55.9 cm)

ONE-YEAR LIMITED WARRANTY

This Raya product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance.

EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Raya Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Raya along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit www.rayalighting.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com

Raya is a registered trademark of the Gradus Group.

© 2024 Gradus Group LLC. All Rights Reserved.

FAQ

Q: Can the Brite Stix be powered off using the remote?
A: No, the remote can only set the Brite Stix to sleep mode but cannot power it off.

Q: How do I know when the battery is fully charged?
A: The charging indicator will stay on when the battery is fully charged.

References

• Gradus | Gradus Group
• Raya | Flashes, Reflectors, Softboxes and Lighting Accessories

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>