somfy SONESSE2 AC Zigbee Motor Installation Guide
- May 15, 2024
- somfy
Table of Contents
somfy SONESSE2 AC Zigbee Motor
Specifications
- Model: SONESSE2 40 Zigbee HP
- Input Voltage: 230 V 50 Hz, 120 V 60 Hz, 220 V 60 Hz
- Color Coding: L Brown (Black), N Blue (White)
Start Up
To set up the drive, download the TaHoma pro application from the app store.
Drive Setting:
Once the TaHoma pro application is downloaded, open the app and follow the
instructions to set the drive.
Drive Resetting:
This reset deletes all programmed control points, sensors, end limit settings,
and resets the favorite position for the drive.
Instructions to be Respected:
Field of Application:
The Sonesse 40 drives are designed to motorize all types of applications.
Safety Instructions for Wiring:
- The installer must inform customers of safety instructions for wiring.
- Cables passing through a metal wall must be protected and isolated using a sheath or sleeve.
- Attach cables to prevent contact with moving parts.
Short installation guide
ORIGINAL INSTRUCTIONS
Complete instruction guide available online on www.somfy.info
DRIVE SETTING
Once the “TaHoma pro” application is downloaded, open the app and follow the instructions to set the drive.
INSTRUCTIONS TO BE RESPECTED
These instructions apply to all Sonesse 40 Zigbee drive, the different versions of which are available in the current catalog.
FIELD OF APPLICATION
The Sonesse 40 drives are designed to motorise all types of:
- Interior vertical blinds which front rail moves solely by gravity with a mass less than 15 kg.
- Tiltable venetian blinds which bottom lath can be lifted at least by 4 cm when an upward force of 150 N is applied to the bottom lath positioned at 16 cm from the fully extended position.
LIABILITY
Please read these instructions carefully before installing and using the
drive. In addition to following the instructions given in this guide, the
instructions detailed in the attached Safety instructions document
must also be observed.
The drive must be installed by a motorisation and home automation
professional, according to instructions from Somfy and the regulations
applicable in the country in which it is commissioned.
It is prohibited to use the drive outside the field of] application described
above. Such use, and any failure to comply with the instructions given in this
guide and
in the attached Safety instructions document, absolves Somfy of any liability
and invalidates the The installer must inform its customers of the operating
and maintenance conditions for the drive and must provide them with the
instructions for use and maintenance, and the attached Safety instructions
document, after installing the drive. Any After-Sales Service operation on the
drive must be performed by a motorisation and home automation professional.
If in doubt when installing the drive, or to obtain additional information,
contact a Somfy adviser or go to the website
www.somfy.com.
SAFETY INSTRUCTIONS FOR WIRING
Cables which pass through a metal wall must be protected and isolated using a
sheath or sleeve.
Attach cables to prevent any contact with moving parts.
If the drive is used outdoors, and if the power supply cable is a type H05-VVF
cable, the cable should be installed in a UV-resistant duct, e.g. under a
gland.
Leave the drive power supply cable accessible: the product must be easily
replaceable.
Always make a loop in the power supply cable to prevent water entering the
drive.
CAUTION
The product is intended for being supplied by Class II output of an external
power supply. Do not use an extension cord. If the power supply cord is too
short, have a qualified electrician install an outlet near the motorised
product.
The drive must be installed by a professionally qualified person (electrical specialist according to DIN VDE 1000-10) for drives and automations in the building services sector in accordance with the Somfy instructions and the applicable regulations in the country of commissioning.
SPECIFIC INSTRUCTIONS FOR ASSEMBLY
Sonesse 40 Zigbee : interior diameter of the tube has to be Ø 37 mm or greater.
- Frequency bands and Maximum power used2.4 GHz – 2.4835 GHz e.r.p. <63mW [USA, Australia, Canada] 2.4 GHz – 2.4835 GHz e.r.p. <10mW [Other countries]
- Power supply 230 V ~ 50 Hz / 120 V ~ 60 Hz / 220 V ~ 60 Hz
Stand-by consumption: < 0,5W
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SOMFY ACTIVITIES SA is under license. Other trademarks and trade names are those of their respective owners.
Reference Designation
- 5172631SONESSE2 40 Zigbee
- 5172632SONESSE2 40 Zigbee
- 5172633SONESSE2 40 Zigbee
FCC warning statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure
- compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum
distance of 20 cm between the radiator and any part of your body.
FCC ID: DWNSON40ZB 12049ASON40ZB
ISED WARNING STATEMENTS: This equipment complies with IC RSS-102 radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and any part of your body.
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISED ID: 12049A-SON40ZBAC
Apple and Apple logos are trademarks of Apple, Inc., registered in the U.S.
and other countries.
iPad® and iPhone® are registered trademarks of Apple, Inc. App Store is a
service mark of Apple Inc.
Android is a trademark of Google LLC.
https://developer.android.com/distribute/marketing-tools/brand-guidelines US Patents US7726379, US8469171, US8330309, US8253288, US8597157, patent pending.
This tubular Motor Operator is UL Listed in the file E60495 .
SOMFY ACTIVITES SA 50 avenue du Nouveau Monde, 74300 CLUSES FRANCE
www.somfy.com
Images are not contractually binding – 100% recycled paper – Copyright © 2023.
All rights reserved. SOMFY ACTIVITES SA, Société Anonyme, capital 35.000.000
Euros, RCS Annecy, 303.970.230 – 11/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>