CyberPower HT705GR Tier 2 Advanced Power Strip User Guide

CyberPower HT705GR Tier 2 Advanced Power Strip

Product Information

HT705GR Tier 2 APS

The HT705GR Tier 2 APS is a surge protector with an infra-red (IR) sensor that can be used to control the power supply of electronic devices such as gaming consoles, cable boxes/DVRs, TVs, DVD players, and audio equipment. It has energy-saving features that can be customized to turn off after one or two hours of inactivity. The IR sensor is connected to the surge protector with a small input jack and should be placed in the sightline of remotes for optimal performance. The product also has a power switch that can be turned on or off as required.

Product Usage Instructions

1. Turn the power switch to OFF.
2. Plug the surge protector into a wall outlet.
3. Plug powered-down electronic devices into appropriate outlets.
4. Connect the infra-red (IR) sensor to the surge protector with the small input jack.
5. Place the glossy side of the IR sensor in the sightline of remotes.
6. Turn the power switch to ON.
7. Power on the TV and other electronic devices such as DVD players, game consoles, and audio equipment.
8. The energy-saving timer’s default setting is one hour. The IR sensor’s blue LED light will blink for 4.5 minutes after one hour of the last click of remote. Click any button on a TV remote or the volume button on a cable provider’s remote to restart the energy-saving timer to zero. The blue LED light will stop blinking for another hour.
9. Power OFF when done watching.

Changing Energy Saving Timer:

The energy-saving timer can be customized to turn off after one or two hours of inactivity. Follow the steps below to change the timer:

• One Hour:
  1. Hold the IR sensor button down for 7 seconds.
  2. The LED light will flash 3 times, release.
  3. Press IR sensor 1 time.
  4. The LED light will flash 1 time, and the timer will be set to 1 hour.
• Two Hours:
  1. Hold the IR sensor button down for 7 seconds.
  2. The LED light will flash 3 times, release.
  3. Press IR sensor 2 times, pausing in between.
  4. The LED light will flash 2 times, and the timer will be set to 2 hours.

Note: The IR sensor blinks for 1 minute after TV powers off. The power strip will turn off energy-saving outlets.

If you need additional help with installation, troubleshooting, or general product questions, feel free to contact our Tech Support department.

SETUP

1. Turn power switch to OFF.
2. Plug surge protector into wall.
3. Plug powered-down electronic devices in to appropriate outlets.
4. Connect infra-red (IR) sensor to surgeprotector with small input jack.
5. Place glossy side of IR sensor in sightline of remotes.
6. Turn power switch to ON

OPERATION

1. Power TV ON.
2. Power ON DVD player, game console, speakers, etc.
3. Energy saving timer’s default setting is 1 hour. The IR sensor’s blue LED light will blink for 4.5minutes after one hour of last click of remote. Click any button on a TV remote or the volumebutton on a cable provider’s remote to restart energy saving timer to zero. Blue LED light willstop blinking for another hour.
4. Power OFF when done watching.

NOTE: IR sensor blinks for 1 minute after TV powers off. Power strip will turn off energy saving outlets.

CHANGING ENERGY SAVING TIMER

One Hour:

1. Hold the IR sensor button downfor 7 seconds.
2. LED light will flash 3 times, release.
3. Press IR sensor 1 time.
4. LED light will flash 1 time,and timer will be 1 hour.

Two Hours:

1. Hold the IR sensor button downfor 7 seconds.
2. LED light will flash 3 times, release.
3. Press IR sensor 2 times, pausingin between.
4. LED light will flash 2 times,and timer will be 2 hours.

Need Additional Help? Feel free to contact our Tech Support department with installation, troubleshooting, or general product questions.

CyberPower Technical Support

• 1-877-297-6937
• tech@cpsww.com
• cyberpowersystems.com
• 4241 12th Avenue E, Suite 400,
• Shakopee, MN 55379, USA
• Monday-Friday, 7am-6pm (CST)

This document is believed to be accurate, but CyberPower reserves the right to change or correct the contents and does not assume any responsibility for omissions or errors. Entire contents copyright © 2023 Cyber Power Systems (USA), Inc. All rights reserved. Repro-duction in whole or in part without permission is prohibited

References

• CyberPower UPS Systems, Battery Backup, PDUs, USB Surge Protectors

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>