somfy 1871025 Wire Free Surface 5 Channel Instructions

June 1, 2024
somfy

somfy-LOGO

somfy 1871025 Wire Free Surface 5 Channel

somfy-1871025-Wire-Free-Surface-5-Channel-PRODUCT

Specifications

  • Item #: 1871025 (White)
  • Installation method: Independently mounted, for surface-mount or wall-box mount
  • Type of Action: 1
  • Pollution Degree: 4 overall, 2 micro-environment
  • Dimensions: 2.75″ x 2.64″ x 4.50″ [70mm x 67mm x 114mm]
  • IP Rating: IP54

Product Overview

The DecoFlex WireFree Surface keypad provides a simple and elegant way to control Somfy-powered RTS shades. Suitable for interior and exterior applications with its surface-mount capability and IP54 rating.

Control Operation

  • Status LEDs: Press to select the channel(s) to control.
  • STOP: Press to stop moving shades or bring stationary shades to a favorite position.
  • Raise/Lower: Press to raise/lower shades to desired levels.

What’s In the Box

  • Somfy Flush-Mount Faceplate (Included)

Installation

  1. Drill two 3/16″ holes using the mounting frame as a guide.
  2. Install the frame using the anchors and screws provided.
  3. Push the keypad module until you hear a click.
  4. Attach the Somfy wall plate to the keypad.

Programming

For detailed programming steps, refer to the pocket programming guide at www.somfypro.com/pocket-programming-guide.

FCC/IC Information

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s).

Contact Information

  • New Jersey: 121 Herrod Blvd. Dayton, NJ 08810 | T: (609) 395-130
  • Florida: 1200 SW 35th Ave. Boynton Beach, FL 33426 | T: 561-995-0335
  • California: 15301 Barranca Pkwy. Irvine, CA 92618-2201 | T: 949-727-3510
  • Somfy ULC Canada: 6411 Edwards Blvd. Mississauga, ON L5T 2P7 | T: 905-564-6446

FAQ

Q: What should I do if the shades do not respond to the keypad?

A: Check the battery level of the keypad and ensure it is properly installed. If issues persist, contact customer support for assistance.

Q: Can I use the DecoFlex WireFree Surface keypad for both interior and exterior shades?

A: Yes, the keypad is suitable for controlling both interior and exterior Somfy-powered RTS shades.

Product Overview

  • The DecoFlex WireFree Surface keypad provides homeowners with a simple and elegant way to control their Somfy-powered RTS shades.
  • With a surface-mount capability and IP54 rating, it is ideal for interior and exterior applications.

Control Operation

somfy-1871025-Wire-Free-Surface-5-Channel-FIG-1

What’s In the Box

  • DecoFlex WireFree™ Surface 5-Channel
  • Instructions
  • CR2430 battery (x1)
  • Keypad assembly
  • Mounting frame
  • Mounting screws (x2)
  • Screw anchors (x2)

Important Notes

  • Codes: Install under all local and National Electrical Codes.

  • Environment: Ambient operating temperature: 4° F to 131° F (-20° C to 55° C), 0 to 90% humidity, non-condensing, IP54 rating.

  • Mounting: For optimal performance, DO NOT mount the control to a metal surface.

  • Battery: DO NOT use rechargeable batteries. Using improper batteries could damage the DecoFlex Surface keypad.

  • Cleaning: To clean, wipe with a clean damp cloth. Do not use any chemical cleaning solutions.

  • Purpose of control: Electronic, Operating Control
    Installation method: Independently mounted, for surface-mount or wall-box mount

  • Type of Action: 1

  • Pollution Degree : 4 overall, 2 micro-environment

Regarding Battery

CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS”

Dimensions

somfy-1871025-Wire-Free-Surface-5-Channel-FIG-2

Installation

The keypad can be surface-mounted with the following steps:

  1. Drill two 3/16” holes using the mounting frame as a guide.
  2. Install the frame using the anchors and screws provided.
  3. Push the keypad module until you hear a click.
  4. Attach the Somfy wall plate to the keypad.somfy-1871025-Wire-Free-Surface-5-Channel-FIG-3

Battery Replacement

WARNING: Burn hazard. To avoid the risk of fire, explosion, or burns, DO NOT recharge, disassemble, crush, puncture, or incinerate the battery. Please recycle the battery appropriately.

  1. Remove the Somfy wall plate to access the keypad module.
  2. Slide the battery door off and remove the battery from the holder.
  3. Remove the existing battery and replace it with a new CR 2430 battery, positive (+) side up. Slide the battery door back into the keypad module and reinstall it with the wall plate.somfy-1871025-Wire-Free-Surface-5-Channel-FIG-4

Programming

For detailed steps on programming, please refer to the pocket programming guide at www.somfypro.com/pocket-programming- guide .

FCC

FCC/IC Information

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference,
  2. this device must accept any interference, including interference that may cause undesired operation.

New Jersey

  • 121 Herrod Blvd.
  • Dayton, NJ 08810
  • T:609-395-1300
  • F:609-395-1776
  • Somfy Systems, Inc. T: (800) 22-SOMFY www.somfypro.com

Florida

California

Somfy ULC

Canada

  • 6411 Edwards Blvd. Mississauga, ON L5T 2P7 T:905-564-6446
  • F:905-238-1491
  • © Somfy Systems, Inc. • NOVEMBER 2023
    • All brands, products, and trademarks are the property of their respective owners.

Documents / Resources

| somfy 1871025 Wire Free Surface 5 Channel [pdf] Instructions
1871025 Wire Free Surface 5 Channel, 1871025, Wire Free Surface 5 Channel, Free Surface 5 Channel, Surface 5 Channel
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals