somfy 1860093 Power Supply DC Installation Guide
- May 15, 2024
- somfy
Table of Contents
1860093 Power Supply DC
Installation Guide
SOLUTIONS FOR
BUILDING CONTROL
amine Ref. 1860093
**Power Supply DC
**
1860093 Power Supply DC
Before installation, please read and follow these instructions. Incorrect
installation may lead to serious injury. Disconnect all power cables to be
installed! Take precautions against unintentional switching on! The product
must be installed, maintained and dismounted by a skilled person according to
the relevant regulation. An all-pole mains switch shall be incorporated in the
electrical installation of the building to provide simultaneous separation of
at least 3mm for all phases from the supply.
Somfy cannot accept any liability for defects and damage caused by failure to
follow these instructions. Please keep these instructions for future
reference.
SOMFY hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of the European
Directives applicable to the European Union. A declaration of conformity is
available at www.somfy.com/ce.
Somfy limited, Yeadon LS19 7ZA UK, hereby declares that the radio
equipment covered by these instructions is in compliance with the requirements
of UK legislation: the Radio Equipment Regulations S.I. 2017 N°1206. The full
text of the UKCA declaration of conformity is available at
www.somfy.co.uk
A MOUNTING
Mounting in electrical cabinet, false ceiling, floor or wall mounting. Ensure
that the unit is mounted on a solid surface to guarantee safety and a secure
fixing of the unit.
The unit shall be mounted in such a way, that the back side is not accessible.
[1] Choose the optimum location: flat and large surface.
[2] Select the relevant screws according to the material of the mounting site
and mount the animeo Power Supply DC. Mains connection should not be
accessible following correct installation.
[3] Use cable tie!
B WIRING
[1] Tool for all terminals
[2] Wiring diagram
C MAX. OUTPUT CURRENT
[1] 2.5 A (100 % permanent),
4.5 A (intermittent operation ton 3 min./toff 3 min.)
CHARACTERISTICS
| Supply voltage | 220 – 240 V AC / 50/60 Hz ~ |
|---|---|
| Stand-by current (IEC 62301) | 45 mA@230 V/50 Hz |
| Stand-by power (IEC 62301) | 1.8 W@230 V/50 Hz |
| DC output@24 V DC (100 %) | 2.5 A |
| DC output@24 V DC (ED 50 %) | 4.5 A |
| Terminals | Spring connectors |
| Operating temp. | 0° C … 45° C |
| Relative humidity | Max. 85 % |
| Material of housing | PC-ABS |
| Housing dimensions | 130 x 180 x 62 mm |
| Weight | 460 g |
| Degree of protection | IP20 |
| Conformity | www.somfy.com/ce |
CABLES
Connection to …| Cable| Temperature resistance| Max.
distance
---|---|---|---
220 – 240 V AC| Min.: 2 x 1.5 mm²/15 AWG
Max.:2 x 2.5 mm²/13 AWG| |
24 V DC| Min.: 2 x 1.5 mm²/15 AWG
Max.:2 x 2.5 mm²/13 AWG| + 90° C| 10 m/33 ft
We care about our environment. Do not dispose of the appliance with usual
household waste. Give it to an approved collection point for recycling.
8/20 – animeo Power Supply DC Ref. 5010767E
Ref. 5010767E 2023/03/29
Somfy Activates SA
50 Avenue du Nouveau Monde
74300 Cluses France
www.somfy.com/projects
SOMFY ACTIVITES SA · Société Anonyme,
· capital 35.000.000 €, RCS Annecy 303.970.230
A BRAND OF ROUP ·03/23·
Ref. 5010767E
References
- Somfy | Motors, Automatisms, Controls & Smart Home Solutions
- Declarations of conformity
- Homepage | Smart Buildings Projects | Somfy Projects
- Somfy: Motoren, Steuerungen und Smart-Home-Lösungen
- Altgeräterückgabe
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>