Immax 08976L Flame Aroma Diffuser Air Humidifier Home Electric Owner’s Manual
- June 15, 2024
- immax
Table of Contents
Immax 08976L Flame Aroma Diffuser Air Humidifier Home Electric
Product Information
- Product Name : IMMAX FLAME Aroma Diffuser and Humidifier
- Model Number : 08976L
- Features: Flame imitation, USB-powered, water tank, mist button, light button, base
Technical Specifications
- Rated Voltage: DC5V
- Rated Power : 10W
- Water Tank Capacity: 200ml
- Mist Output : about 30-40ml/hour
Usage Instructions
- Before using the product, make sure to use a standard USB cable and power adapter with an output voltage and current of (DC5V, 2A). If the power adapter output does not meet these specifications, the product may not work properly.
- To fill the water tank, remove the outer cover and pour an appropriate amount of water into the tank. Do not exceed the maximum water level of 200ml.
- After filling the water tank, securely close the outer cover.
- Connect the power cord to the USB charger and ensure it is properly connected.
- Press the mist button to start the misting function. Adjust the mist output by pressing the button again.
- Press the light button to activate the flame imitation feature. Press it again to adjust the brightness or turn off the light.
- To maintain the product, unplug the power cord before cleaning.
- Clean the inside and outside of the water tank using a soft cloth every 5-6 uses or every 2-3 days.
- Avoid direct contact with the ultrasonic atomizing sheet in the water tank with your hands.
- If the product abnormally shuts down or cannot be turned on, check if the water tank has enough water, ensure the power cord is connected properly, and use a matching USB charger (5V, 2A).
- If there is no spray mist or weak mist output, there may be scale in the water tank or impurities in the added water. Clean the water tank and add an appropriate amount of water.
- For any questions or advice, contact support@immax.eu.
Please note that the above information is based on the provided text-extract and may not include all details from the actual user manual. It is recommended to consult the official user manual for complete and accurate instructions.
PRODUCT OPERATION INSTRUCTION
- Place the diffuser on a flat and stable surface and remove cover
- Connect the suplied power cord to the type USB-C port on the product.
- Use a measuring cup to fill the water tank with water. Do not add more water than the maximum water level.
- Replace the cover on the diffuser.
- In the standby state, short press the mist button to turn on the diffuser (spray+red flame starts to work at the same time) short press the mist button again to stop the spray and turn off the light at the same time.
- In the working state of the product, short press the light button to switch the light color effect: red flame-blue flame-turn off the light and cycle in turn.
- In standby mode, the lights can be turned on or off individually.
- The product has a built-in water shotage protection function when there is no water flling in the water tank or the water level is too low, the diffuser will turn off automatically.
PRECAUTIONS
- Lift up and remove the outer cover before using the measuring cup to fill the water tank. Do not add water when the product is working.
- Do not fill the water tank beyond the maximum water level line (200ml), otherwise it will effect the automatization effect or leak water and cause damage to the diffuser. When the water level is lower than 150ml the flame lighting effect is better.
- The essential oil (water-soluble essential oil) can only be dropped after filling the water tank, no more than 3 drops.
- It is strictly forbidden to use volatile liquids such as deodorant, perfumes, etc. To be sure to use water-soluble essential oils.
- Please use the power cord provided with the product, Type-C, 2A. If you use a substitute power cord, please note that the current specification is 2A, otherwise it will effect to use of the product and the automatization effect.
- Please use a USB charger with standard DC5V2A, it will cause insufficient power and the product will not work properly.
- Regularly clean the diffuser according to the manitenance instructions to avoid malfunctions.
- If there is remaining water in the water tank, please pour it out when you use it again, add water again and then start to work.
- If the essential oil is accidentaly adhered to the cover, etc. please use a soft cloth to wipe it clean.
- Please use the attached measuring cup to add water, do not use the tap directly to add water to the water tank.
- Always keep the diffuser on a stable platform surface, do not place it on carpets, duvets or unstable areas.
- Do not move the diffuser while it is working.
MAINTENANCE
- Be sure to unplug the power cord before maintenance.
- Use a soft cloth to clean inside and outside of the product water tank every 5-6 times or after 2-3 days.
- Do not directly touch the ultrasonic automizing sheet in the water tank with your hands.
IMPORTANT HINTS
- This product must use standard USB cable and power adapter and it is output voltage and current must reach (DC5V, 2A).
- If the output of the power adapter of this product cannot reach (DC5V, 2A), it will not work normally.
TECHNICAL SPECIFICATIONS
- Rated Voltage : DC5V, 2A
- Rated Power : 10W
- Water tank capacity : 200ml
- Mist output : about 30-40ml/hour
If you have any questions or need advice, please contact us at support@ immax.eu
COMMON FAULTS AND TROUBLESHOOTING METHODS
| Problem | Possible cause | Solution |
|---|---|---|
| **** Abnormally shut down or cannot be turned on. | The water tank is short of | |
| water. | Please add water to the water tank. | |
| **** Is the power cord co- nnected? | Please check careffully after |
disconnecting and reconnect the power.
The USB charger does not match.| Please select the matching USB charger (5V,
2A).
No spray mist or spray mist weak.| The water tank is short of
water or too much water.| Please add an appropriate amount of water to the
water tank and do not exceed the maximum water level of 200ml.
**** There is scale in the water tank. There are impurities in the added
water, or the water has been left for too long.| Open the outer cover and pour
out the water in the water tank after cleaning the water tank and an
appropriate amount of water.
IMMAX, Pohoří 703, 742 85 Vřesina,
EU
- www.immax.cz Designed in the Czech Republic, manufactured in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>