Adexa EC04-120 Commercial Electric Convection Oven User Manual

Adexa EC04-120 Commercial Electric Convection Oven

Product Information

Model: EC04-120
Thank you for choosing our company’s convection oven. This user manual contains important information to ensure optimal performance and prevent any unnecessary loss or damage. Please read this manual carefully to familiarize yourself with the installation, operation, and maintenance of our product. Keep this manual for future reference.

Safety

1. Ensure that the input power matches the oven’s requirements. The socket and plug should be compatible.
2. The oven should operate within the specified temperature range. Connect the ground wire.
3. Avoid placing the oven near flammable materials or using it in areas where oil drums, cotton, cloth, or any other inflammable objects are present. Do not wash or spray liquids near the oven.
4. Prevent objects from falling into the oven, as they can cause short circuits.
5. Do not leave the oven unattended while it is working.
6. Do not clean the oven while it is working, and avoid washing it with gasoline.
7. Do not use a damaged power wire. Replace any damaged spare parts to prevent electric leakage.
8. Turn off the power before performing any maintenance.
9. Do not share the same ground electrode with any other machine.
10. Professional servicemen should handle the installation and maintenance of the oven.
11. Leave sufficient space behind the oven for heat dissipation.

Operating of the digital board
Operation: Turn on the power and spin the temperature knob to set the desired temperature.

Functions

1. Circulation heating: The oven uses convection motion to heat food evenly.
2. 99-minute timer.
3. 350 thermostat.
4. Applicable spray function.

Machine Illustration Diagram

Installation Instruction

1. All electrical power units and circuit connections must be installed by a qualified electrician following safety standards.
2. Connections should be made according to the requirements.
3. Ensure that the rubber feet are securely installed.
4. The product should be placed in a well-ventilated room on a solid platform.

Warning

1. Pull out the plug before cleaning, repairing, or moving the machine.
2. Avoid touching the switch or plug with wet hands.
3. Do not flush the machine directly with water. Take care not to let water flow into the switch during cleaning.
4. Keep the machine out of reach of children.
5. Ensure that the ground wire is connected and all connections are reinstated after maintenance.

Maintenance

1. Pull out the plug before performing maintenance and allow the machine to cool down.
2. For daily cleaning, use a dry cloth to wipe off grease from the chamber. Use a suitable cleanser for deeper cleaning.

Note: Only qualified staff should operate the machine. Operators should read this manual to learn about the oven’s functions and operation before use. Please keep this manual for future reference.
Caution: This machine is designed for roasting and baking food only and should not be used for other purposes.

Thanks for your using of our company product, in order to ensure the product performance give full play to the role, please have a read of this manual to reduce unnecessary loss and damage, and get a further study of our product characteristic、 installation and operation. Also please keep the manual for further reference.

Safety

1. Make sure the input power is suitable for this oven use. The parameters of the socket and the plug should be matched.
2. The oven should be working inside the temperature range which is mentioned on the parameter, and the ground wire must be connected.
3. The oven shouldn’t be placed near an oil drum/cotton/cloth and any other inflammable materials. Also please don’t wash or spray beside the oven.
4. Please prevent any object from dropping into the oven to make it short out.
5. Please don’t leave the oven while it is working.
6. Please don’t clean the oven while it is working, and don’t wash it with gasoline.
7. Don’t use damaged power wire, and replace the spare part before using in case of electric leakage.
8. Please turn off the power before maintenance.
9. Sharing the same ground electrode with any other machine is forbidden.
10. The oven should be installed or maintained by a professional serviceman.
11. Please leave enough space behind the oven for heat dissipation.

Operating of the digital board

Operation:

1. Turn on the power and spin the temperature knob and set your needed temperature, then the oven would start preheating, when it reaches your set point, the oven would alarm 4 times, the time window display “FOOD” and it would enter heat preservation status (if there are no operation in 15min, the oven would stop working then power off). Now you can spin the time knob and set the timer, then put in your food and the oven would start working once you close the door, and the timer start counting down.
2. You can stop the timer by pushing the timer Knob during cooking status, and push it again to restart. If you need to adjust the time or temperature, you can spin their knob to your needed point during cooking, then push the knob to confirm.

Function

1. Circulation heating, and the temperature is in the form of convection motion when cooking, which make the food get heated more evenly.
2. 99 minutes timer.
3. 350℃ thermostat.
4. Spray function is applicable.

Machine illustration diagram

Installation instruction

1. All the electrical power units and circuit connections must be installed by a qualified electrician with safety standards.
2. The connection must be based on requirement.
3. Make sure the rubber feet have been installed securely.
4. The product should be placed in a well-ventilated room on a solid platform, and we suggest leaving at least 10cm of space between the product and the wall or barriers. Also, place the product away from the combustible materials and equipped with a fire extinguisher.
5. Remove the packaging film from the surface.
6. The power wire should be connected in accordance with electrical safety standards. Make sure the voltage and frequency conform to the parameter. And please install a double pole switch before the connection. When the product working, the voltage error should be under ±10% (PS: the product must be connected to the ground.)
7. Connect the cable to the power supply fixed by using a screwdriver according to the connection diagram, then loosen the screw inside the power point and plug the cable in, making sure the sheet copper compresses the power line tightly. If the connection is incorrect, it may cause joint heating and burning off the power cord.
8. Connect the water inlet behind the case to the water pipe with the configured bellows, and add a strainer on the water pipe joint in case of a magnetic value block. Also, there is an exhaust pipe behind the case for needless steam to exhaust.

Warning

1. If you want to clean、repair or move the machine, please pull out the plug first.
2. Please don’t touch the switch or plug with a wet hand.
3. The machine can’t be flushed directly, and please be careful not to let the water flow into the switch when cleaning.
4. Keep the children from touching or using the machine.
5. The ground wire must be connected, all the connections must be reinstated after maintenance.

Maintenance

1. Please pull out the plug first before maintenance, and clean it after cooling down the machine.
2. For daily cleaning, you can use a dry cloth to wipe off the grease on the chamber, don’t flush the chamber directly. For the baking stone cleaning, please take out the stone, use a fur blush to clean its surface, and rinse it with water and dry it. (Don’t use any cleanser essence to clean the baking stone, because the stone can strongly absorb water, so that the cleanser would be absorbed at the same time, it may affect the flavor of the food.)
3. We suggest maintaining the machine by a qualified electrician once in a month.
4. Users need to know
5. When doing maintenance please first pull out the plug.
6. Before cleaning, please cool down the chamber, and please don’t use acid cleanser for cleaning.
7. Only qualified staff can use the machine.
8. Operators should read this manual to learn the function and operation of the oven before using it.
9. Please keep this manual for further reference.
10. This machine can be only used for roasting and baking food, and it isn’t applicable for any other use. And the thermostat can adjust the temperature between 20~350℃.
11. The oven is applicable for baking fresh or frozen flour products or meat.
12. Each baking plate should have 4cm space during cooking, and please don’t place too much food on it to keep the hot air circulating.

Troubleshooting

Not heating up

| 1． Please check whether the connection is loose. 2． Set your needed temperature again.

3.  ． Please check whether the power switch matches up with the

parameters

4.  Contact the service center for repair suggestions.

Short circuit| Contact the service center for repair suggestions
Internal light not work| 1.      Please check whether the connection is loose.

2.      If the bulb is broken, pull out the power plug, cool down the chamber, then replace a new bulb.

Scorching smell appear| Contact the service center to check whether the connection shorted out.
Baking unevenly| Readjust the thermostats for each heating element to see how they work, if they don’t work well, please contact the service center to

check whether the heating element needs to change.

No steaming

| 1.      Please check whether the water pipe joint is blocked or disconnected.

2.      Please check the water faucet is blocked or disconnected.

3.      Please check if the magnetic value works well, if it doesn’t, please replace it with a new one.

Specification

Model

| Temperature range| Dimension (mm)| Internal dimension

(mm)

|

Voltage(V)

| Power

（KW）

---|---|---|---|---|---
E C04- 120| 5~350 ℃| 840X725X540| 663X350X545| 220V| 4

Wiring diagrams

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>