Immax NEO 07217L-FINO LED Dimmable Wired Pendant Light Instruction Manual
- June 13, 2024
- immax
Table of Contents
Immax NEO 07217L-FINO LED Dimmable Wired Pendant Light
Product Information
This product is an installation manual for a device with the following specifications:
- IP Rating: IP20
- Dimensions : 2.25m (length) x 3m (width)
- Clearance Requirement : -0.5m
Product Usage Instructions
To install and use this product, please follow these steps:
- Ensure that the installation location provides an IP20 rating, which means it is protected against solid objects greater than 12mm in diameter.
- Prepare the area for installation, ensuring there are no obstructions or hazards present.
- Place the product in the desired location, ensuring it is properly aligned and positioned.
- Observe the clearance requirement of -0.5m, which means the product should have a minimum distance of 0.5m from any surrounding objects.
- Securely fasten the product to the installation surface using appropriate mounting hardware.
- Ensure all connections and wiring are properly installed and secured according to the manufacturer’s guidelines.
- Test the product to ensure it is functioning correctly and meets your requirements.
If you encounter any issues during installation or usage, please refer to the complete user manual for further instructions or contact our customer support for assistance
INSTRUCTIONS
Technical parameters
- Protocol : Zigbee 3.0
- Material : metal, plastic
- Dimensions : D800mm
- Light color: 2700-6000K
- Wattage: 55W
- Luminous flux: 4300lm
- Dimmable : yes
- Illumination time: 50,000 hours
- Power supply input voltage: AC 100-240V 50-60Hz
- CRI(Ra): <86
- Compatibility: iOS, Android, Amazon Alexa, Apple Siri Shortcuts, Google Assistant, Philips HUE, TUYA, Tahoma, Lidl, Ikea.
Final height adjustment of the hanging chandelier. Read carefully in the installation manual!
INSTALLATION
Here the lock, for final adjustment
of the length of the suspension cable. Final height adjustment of the hanging
chandelier. Read carefully in the installation manual!
Immax NEO Smart remote v2 Zigbee 3.0
LIGHTING DEVICES CONTROL VIA APP
- When initially power on the Lighting device:
- Lighting Device will start breathing smoothly in cold white color, and wait to be connected to Gateway via App (During this breathing time, Lighting device can NOT be paired directly to the remote).
- After been successfully connected to Gateway, Light will stay in steady cold white and brighter. Now user can use app to control the Light normally!
LIGHTING DEVICES CONTROL VIA REMOTE
Connecting Process:
We provide 3 flexible methods for consumers to use Remote to con-trol
Light(s). Below Method A and Method B is when user ALREADY add the Light into
app. Method X is for those Light(s) which has NOT been added to App.
METHOD A (ONLINE PAIRING MODE)
- Step 1: On the remote control, long press the “ON” and “OFF” but-tons simultaneously for 5 seconds, the LED indicator of the remote control will start to flash slowly.
- Step 2: In the Immax NEO PRO app, under the Home tab, click “+” to select the option to add a new product. Select the remote control from the list of devices. Then follow the instructions in the app.
- Step 3: Then open the remote tab in the app and click on the icon on the top right – assign lights to the remote.
- Step 4: Press “+” and “-” on the remote at the same time, the LED indicator will flash.
METHOD B (OFFLINE PAIRING MODE)
Put the remote VERY close to the bulb and long press “ON” button of the remote
until Light breath for 3 times. Then the light will be removed in the gateway
and link directly to the remote.
Note : Method B can only pair ONE Light at a time, and can maxi-mumly connect and control 30 lights.
Method X (No App connected):
Before you try Method X, please make sure the Light NOT in contin-uously
breathing status. We can always use Remote to connect to Light by long
pressing “ON”button until it breath for 3 times.
CONTROL PROCESS
Please see below snapshot of 4 simple functions that our remote now supported
after you connected the Light to the Remote.
DISCONNECT PROCESS
- If user previously used Method A and already added both Remote and Lights to the App, then user can directly edit to delete the light in the Remote page.
- If user previously used Method B or Method X for connecting, Then he need to put the Remote very close to the Light and long press “OFF”button until Light breath smoothly for 3 times, which proves disconnecting completed.
DOWNLOAD THE IMMAX NEO PRO APPLICATION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>