Adexa EP2PT Commercial Double Pizza Oven Electric User Manual

Adexa EP2PT Commercial Double Pizza Oven Electric

Product Information

• Product: Electric Pizza Oven
• Model: EP2PT

Thank you for choosing our company’s electric pizza oven. To ensure optimal performance and avoid any unnecessary loss or damage, please read this manual carefully. It provides detailed information about the installation, operation, maintenance, and troubleshooting of the product.

Index

1. Control board operation instruction
2. Functions
3. Machine illustration diagram
4. Parts list
5. Installation instruction
6. Operation instruction
7. Warning
8. Maintenance
9. Trouble shooting
10. Specification
11. Wiring diagrams

Control Board Operation Instruction
The control board operation instruction provides guidance on how to use the control panel effectively.

Functions

• Heating up quickly: The oven is equipped with a 350 thermostat, which significantly reduces cooking time.
• Baking stone: The oven is equipped with a baking stone that ensures even heating of food.
• Dual thermostats: The top and bottom heating elements can be controlled separately, allowing you to adjust the temperature of each element as needed.

Machine Illustration Diagram
The machine illustration diagram provides a visual representation of the oven, including its case, front panel, and chamber.

Parts List
The parts list includes all the components of the oven along with their corresponding part numbers. This helps in identifying and replacing specific parts if needed.

Installation Instruction

1. All electrical power unit and circuit connections must be installed by a qualified electrician following safety standards.
2. Connections should be made according to the specified requirements.
3. Ensure that the rubber feet are securely installed.
4. The oven should be placed in a well-ventilated area on a solid platform.

Operation Instruction
The operation instruction provides detailed guidance on how to use the electric pizza oven effectively.

Warning

1. Always unplug the machine before cleaning, repairing, or moving it.
2. Avoid touching the switch or plug with wet hands.
3. Do not flush the machine directly with water, and be cautious not to let any water flow into the switch during cleaning.
4. Keep the machine out of reach of children.
5. Ensure that the ground wire is properly connected and all connections are reinstated after any maintenance or repairs.

Maintenance
The maintenance section provides instructions on how to properly maintain and clean the electric pizza oven to ensure its longevity and performance.

Trouble Shooting
The trouble shooting section offers solutions to common issues that may arise during the use of the electric pizza oven.

Specification
The specification section provides detailed information about the technical specifications of the electric pizza oven, such as power requirements, dimensions, and weight.

Wiring Diagrams
The wiring diagrams provide visual representations of the electrical connections in the electric pizza oven, helping users understand the internal wiring structure.

Please refer to this manual whenever you need assistance with your electric pizza oven. Keep it for future reference.

Model: EEPP22PPTT
Thanks for your using of our company product, in order to ensure the product performance give full play to the role, please have a read of this manual to avoid unnecessary loss and damage, and get a further study of our product characteristic、 installation and operation. Also please keep the manual for further reference.

Control board operating instruction

1. Operating instruction of the EP2PT control board.
2. The right switch is for controlling the internal lighting.
3. The left switch is for controlling all the heating elements, turn it on, then the thermostats can be used. The indicator lights turn off when the heating elements reach the set temperature. (If the power switch is “On”, the timer would be out of function. If you need to use the timing function, please first turn off the power switch, by now, the timer is also act as “power switch”.)
4. These three thermostats are separately control the top middle and bottom heating elements and their indicator lights.

Functions

1. Functions

2. Heating up quickly. This oven is equipped with 350℃ thermostat, greatly
   save the cooking time.

3. Equipped with baking stone, which makes the food are heated more evenly. 1.3 Two thermostats separately control the top and bottom heating elements, you can freely adjust the temperature of each heating element.

4. Application

5.  Applicable for baking all the fresh and freeze bread and flour products.

6. Applicable for baking fresh and freeze meat.

Machine illustration diagram

• Appearance:
• Case:

• Front Panel:
• Chamber:

Installation instruction

1. All the electrical power unit and circuit connection must be installed by qualified electrician with safety standard.
2. Connection must be based on requirements.
3. Make sure the rubber feet have been installed securely.
4. Product should be place in a well ventilated place on solid platform, and we suggest to least at least 10cm space between the product and the wall or barriers. Also place the product away from combustible materials, and there should be a fire extinguisher equipped around.
5. Remove the packaging film off the surface.
6. The power wire should be connected according to safety standards. Make sure the voltage and frequency conform to the parameters. And please install a double pole switch before connection. When the voltage working, the voltage error should be under ±10%. (Product must be connected to ground.)
7. Connect the cable to the power supply fixed by using a screwdriver according to the connection diagram, then loosen the screw inside the power point, and plug in the cable, make sure the sheet copper compress the power line tightly. If the connection is incorrect, it may cause joint heating and burning off the power cord.

Operation instruction

1. Turn on the power supply.
2. The temperature of the oven can be adjusted between 0~350℃.
3. Turn the timer clockwise to the desired time, then the indicator light on and the heating element starts working, when it reaches the set temperature, the indicator light off. If the temperature is below the set temperature, the heating element will be automatically reheated and the indicator light on.
4. The internal lighting can help monitoring the baking process.
5. Cooking time depends on the amount of the food, the more the food had, the longer the time required.
6. Please turn off the power if not using.

Warning

1. If you want to clean、repair or move the machine, please pull out the plug first.
2. Please don’t touch the switch or plug with wet hand.
3. The machine can’t be flushed directly, and please be careful don’t let any water flow into the switch when cleaning.
4. Keep the children from touching or using the machine.
5. The ground wire must be connected, all the connection must be reinstated after maintenance.

Maintenance

1. Please pull out the plug first before maintenance, and clean it after cooling down the chamber.
2. For daily cleaning, you can use a dry cloth to wipe off the grease on the chamber, don’t flush the chamber with water directly. For cleaning the baking stone, please take out the baking stone, use a fur brush to clean its surface, and rinse it with water then dry it. (Don’t use any cleanser to clean the baking stone, because the baking stone can strongly absorb the water, so that the cleanser would be absorbed at the same time, which may affect the flavor of the food.)
3. We suggest to maintain the machine by qualified electrician once in a month.

Trouble shooting

1. Please check whether the connection is loose.
2. Rotate the thermostat to your needed temperature.
3. Please check whether the power switch is match up with the parameters
4. Contact the service center for repair suggestion.

Short circuit| Contact the service center for repair suggestion
Internal light Not work|

1. Pull out the plug, and cool down the chamber.
2. Replace a new bulb.

Scorching smell appear| Contact the service center to check whether the connection is short out.
Baking unevenly| Readjust the thermostats for each heating elements to see how they work, If they work well, please contact the service center to check if the Heating element need to change.

Specification

Model| Temperature range| Dimension(mm)| Internal dimension(mm)| Voltage(V)| Power(KW)
---|---|---|---|---|---
EP2PT| 0~350 ℃| 560X570X440| 415X400X120X2PCS| 220V| 3

Wiring diagrams

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>