KUZCO FM9304-UNV LED Flush Mount Ceiling Light User Manual
- June 13, 2024
- KUZCO
Table of Contents
KUZCO FM9304-UNV LED Flush Mount Ceiling Light
START FROM HERE
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all time during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Please Note:
- This Kuzco LED fixture comes with pre-wired LED module(s).
- Unless instructed to do so, please do not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage.
- For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required.
- 120-277V input
Installation Instauration
- Remove the fixture from its original packaging
- Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b)
- Attach mounting plate (1c) to electrical junction box (1a) using junction box screws (1e) provided in hardware package
- Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package and place driver (4a) in canopy (2a)
- Attach canopy (2a) to mounting plate (1c) using canopy screws (2b)
Customer Support
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W:kuzcolighting.com
20221108
Documents / Resources
|
KUZCO FM9304-UNV LED Flush Mount Ceiling
Light
[pdf] User Manual
FM9304-UNV LED Flush Mount Ceiling Light, FM9304-UNV, LED Flush Mount Ceiling
Light, Flush Mount Ceiling Light, Mount Ceiling Light, Ceiling Light, Light
---|---
References
Read User Manual Online (PDF format)
Loading......