Oceanic TX-18F-1 Electric High Velocity Fan Instruction Manual

June 13, 2024
Oceanic

Oceanic Logo User manual Oceanic TX 18F 1 Electric High Velocity
FanElectric High Velocity Fan
OCEAVI120W3
Electric High Velocity Fan

Important safety instructions:

Please read this instruction manual fully before using this device and keep it safe for future reference.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Check the voltage indicated on the rating plate. This product is designed for a 220 – 240V~ 50Hz electric supply. Periodically check the power cord of this fan.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not place the electrical cord under a cover. Do not overlay the cord with little covers or such element. Place the cord in an area where there is not any risk of stumbling over it. Please place the fan on a flat, firm, safety surface before use.
Disconnect the plug from socket when not in use, seize the plug and then pull it out. Do not pull the cord to pull out the plug.
Do not put your fingers or any other object into the grille when the fan is operating. Please pay special attention when use near children, to avoid children play with fan.
Do not let hair, net curtains, tablecloth, clothes or curtains near the openings of the fan. They could be entangled into the fan, causing damaged or injuries.
Do not use the fan when the cord or plug damaged, fan blade fallen or any other damages.
Do not use this fan outside; it is for indoor use only.
Do not use this fan in a damp area such as bathroom.
Do not use this fan near a window and under direct sunshine.
The fan should not be operated without a base nor used when tipping over.
Do not operate the fan in an area where gasoline is used or stocked, painting or such flammable liquids.
Unplug the unit before serving or moving, including for cleaning purpose.
Always unplug it when not in use.
Use this fan only as it is described in this manual.
Do not try to disassemble this fan, there are not any parts that could eventually be repaired by the user. If you need maintenance, please send the fan back to the agent.
Keep the fan clean and maintain in good condition.

Appliance specifications

Operating voltage: 220-240 V~, 50 Hz Power consumption: 120 W

Tower Fan model TX-18F-1, reference OCEAVI120W3

Description| Symbol| Value| Unit
Maximum fan flow rate| F| 110,79| m3/min
Fan power input| P| 91,80| W
Service value| Sv| 1,21| (m3/min)/W
Off mode power consumption| Poff| 0| W
Fan sound power level| LWA| 65,07| dB (A)
Maximum air velocity| C| 3,95| meters/sec
Measurement standard for service value| EN IEC 60879: 2019
Contact details for obtaining more information| OCEANIC 120-126 Quai de Bacalan CS 11584 33000 Bordeaux

Product Structure

Oceanic TX 18F 1 Electric High Velocity Fan - Product

  1. Frontgrile
  2. FanBlade
  3. Motor
  4. Rear grille
  5. Screw
  6. Stand
  7. Hook (for collecting cord)
  8. Handle
  9. Switch box
  10. Power cord with plug

Installation Instruction.

This product doesn’t need installation, take it out of the package and put it on a safe & flat surface, connect the plug to power supply, itis ready to be used.
Operating Instruction.

  1. Select the desired direction of airflow by tilting the fan grile upward or downward.
  2. Select preferred speed (1-Low,2-Med,3-High) by pressing the switch button on the control box.
  3. Always turn off (0-off) and unplug fan after using.

Cleaning and Maintenance.

Dust may accumulate on the rear grille cover and fan blade, which would affect fan performance. Thus, it is suggested to clean the fan at least once per month.

  1. Always disconnect the power cord from the mains before carrying out any maintenance.
  2. Use a damp (NOT WET) cloth to clean the plastic and metal surfaces.
  3. Never put the fan in water or any other liquid. Never use gasoline, benzene, or any other chemical to clean the fan.
  4. After cleaning, make sure the product and the other parts must be dried completely before connecting to the power supply.
  5. If the fan is not being used for a long period of time, please store it in a dry place.

DISPOSAL OF WASTE.
As a responsible distributor, we attach great importance to environmental protection.
We encourage you to follow the correct disposal procedures for your mmmm device, batteries and packaging elements. This will help preserve natural resources and ensure that it is recycled in a way that respects health and the environment.
You must dispose of this product and its packaging according to local laws and rules.
Since this product contains electronic components and sometimes batteries, the product and its accessories must be disposed of separately from household waste when the product is at the end of its life.
For more information on disposal and recycling procedures, contact the authorities of your municipality.
Bring the device to the local collection point for recycling. Some centers accept products free of charge.

OCEANIC IMPORT BY:
120-126 Quai de Bacalan AM.C.
csnss4 123, QUAI JULES GUESDE
33000 Bordeaux 94400 VITRY SUR SEINE  France

www.oceanic.eu

Documents / Resources

| Oceanic TX-18F-1 Electric High Velocity Fan [pdf] Instruction Manual
TX-18F-1 Electric High Velocity Fan, TX-18F-1, Electric High Velocity Fan, High Velocity Fan, Velocity Fan, Fan
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals