MEEC TOOLS 022357 Saw Workstation Cross Cut Mitre Saw Instruction Manual
- June 13, 2024
- MEEC TOOLS
Table of Contents
MEEC TOOLS 022357 Saw Workstation Cross Cut Mitre Saw
- Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation.
- It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product.
- For the latest version of operating instructions, refer to the Jul website.
SAFETY INSTRUCTIONS
Read these instructions carefully before use, and save them for Mure reference.
IMPORTANT:
Read these instructions carefully before assembly, use, and/or maintenance.
WARNING!
- Do not use the product if any parts are missing.
- Do not make any modifications to the product. Never use accessories that are not recommended by the manufacturer.
- Only use identical spare parts for maintenance.
SYMBOLS
Read the instructions.
TECHNICAL DATA
- Max load: 200 kg
- Size: W743-375xH85.5 cm
- Weight: 20 kg
DESCRIPTION
PACKAGE CONTENTS
- Stand for the miter saw
- Saw bracket, 2x
- Roller support, 2x
- Attachment for roller support, 2x
- Instructions
- Knob for extension rail, 2x
- Knob to adjust length, 2x
- Knob to adjust height, 2x
- Retaining screws, 4x
PARTS
- Fence for workpiece
- Attachment for roller support
- Extension roil
- Roller support
- Saw bracket
- Leg
FIG. 1
ASSEMBLY
- Carefully remove the product and all the accessories from the packaging.
- Check that all the parts on the list are included and undamaged.
- Assemble the parts as shown in the figures.
- Leg
- Locking pin
FIG. 2
- Knob to adjust the height
- Attachment for roller support
- Extension rail
- Knob to adjust the length
FIG. 3
- Saw bracket
- Spanner
- Nut
- Screwdriver
- Adjusting screw for fence
FIG. 4
- Nut
- Lock washer
- Flat washer
- Saw bracket
- Carriage screw
- Mitre saw
- Slot
FIG. S
- Nut
- Lock washer
- Flat washer
- Saw bracket
- Carriage screw
- Mitre saw
- Stud, 50.8 x 101.6 mm
- Slot
FIG. 6
How to mount the saw bracket on the stand.
FIG. 7
- Bottom locking lever (to lock in stand)
FIG. 8
MAINTENANCE
Do not use solvent on plastic parts, this can damage the plastic.
Remove any dirt, dust, oil, and grease with a clean cloth.
- WWW.JULA.COM
- © JULA AB 2022-04-11 JULAAB BOX 363, 532 24 SKARA, SWEDEN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>