SoundCore Flare+ Portable Speaker A3162 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Flare Plus Portable Speaker A3162
USER MANUAL
Model No.: A3162; V01
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Soundcore Flare+ can be immersed in water up to 1m for up to 30 minutes.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not use any corrosive cleaner/oil to clean.
What’s Included
At a Glance
1. Volume Buttons for Volume Control
2. Bass Up Button
3. Multi-function Button
4. Light Effects Button
5. Bluetooth Button
6. Power Button
7. USB port
8. micro USB Port
9. 3.5mm Audio Input Port
Using Your Soundcore Flare+
1. Turn on / off
a. Bluetooth mode
Note: With True Wireless Stereo technology, you can pair your Soundcore Flare+ with another Soundcore Flare+ to explore the best sound effects with left and right sound channels separated on both speakers.
Check available Light Effects modes on Soundcore App.
NOTE:
- When turned on, Soundcore Flare+ will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode.
- To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.
- Having connection problems? Remove Soundcore Flare+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
b. AUX-In mode
- SoundLine AUX cable sold separately.
Note: Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Flare+
NOTE:
- Use the included USB cable to charge your Soundcore Flare+ and make sure it is fully charged before its first use.
- Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.
- When not in use, store your speaker in a cool place.
Soundcore App
Specifications are subject to change without notice.
| Input: | 5 V 2 A |
|---|---|
| Charge out: | 5 V 1 A |
| Audio output: | 25 W |
| Charging time: | 4.0 hours |
| Play time (varies by volume level and music content): | 20 hours |
| Size: | 100 x 100 x 182 mm |
| Weight (without packaging): | 853 g / 30.1 oz |
| Bluetooth version: | V5.0 |
| Bluetooth range: | 20 m / 66 ft |
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3162
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.soundcore.com//
Maximum output power: 0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong
DOWNLOAD
SoundCore Flare+ Portable Speaker A3162 User Manual – [Download PDF]
SoundCore Flare+ Portable Speaker A3162 QSG – [Download PDF]
A3162 Soundcore Flare+ Declaration of Conformity – [Download PDF]