SuperSprings SSC-25 SuperCoils Front Suspension Enhancer Instruction Manual
- June 13, 2024
- SuperSprings
Table of Contents
SuperSprings SSC-25 SuperCoils Front Suspension Enhancer
Product Information
| Part Number | SSC-25 |
|---|---|
| Product Line | SUPERCOILS FRONT |
| Primary Applications | RAM 2500 4 X 4* (2014 – present) |
RAM 3500 4 X 4 (2013 – present)
(Diesel Only)
Parts List| | Item| Part #| Description| Qty
---|---|---|---
A| 202025| SSC-25 Coil Spring| 2
Tools Required| Floor Jack
Jack Stands
Wheel Chocks
Metric Sockets/Wrenches
Torque wrench
Product Usage Instructions
- Park the vehicle on a hard, level surface and engage the emergency brake. Place chocks in front and behind wheels to prevent rolling. Observe all safety precautions and wear safety glasses.
- Raise the front of the vehicle by the axle using a jack rated for the vehicle weight and support the frame with jack stands. Keep the jack in place supporting the weight of the axle.
- Remove the front wheels.
- Unbolt the sway bar from the sway bar end links.
- Unbolt the track bar from the frame.
- With the axle still supported, unbolt the lower shock bolts from the axle.
- Carefully lower the axle just enough to remove the factory coil springs and be careful to avoid putting stress on the ABS and brake lines.
- Remove the factory coil isolators from the factory coils and place them on the SuperCoils.
- Install the SuperCoils. Be sure they are rotated so the ends of the springs are located correctly. Raise the axle enough to connect the shocks to the axle. Torque the shock bolts to factory specifications.
- Reconnect the track bar to the frame and torque the bolt to factory specifications.
- Reconnect the sway bar and torque the bolts to factory specifications.
- Install the wheels and torque the lug nuts to factory specifications.
- Raise the vehicle and remove the jack stands. Carefully lower the vehicle to the ground.
- Remove the wheel chocks from in front and behind the rear wheels.
- Register the warranty for your SuperSprings International part. A warranty card can be found in the box your part came in.
INSTALLATION INSTRUCTIONS
PART NUMBER
SSC-25
BEFORE YOU BEGIN
PRIMARY APPLICATIONS
Front Suspension for:
-
RAM 2500 4 X 4* (2014 – present)
-
RAM 3500 4 X 4* (2013 – present)
*Diesel Only
PARTS LIST
| Item | Part # | Description | QTY |
|---|---|---|---|
| A | 202025 | SSC-25 Coil Spring | 2 |
TOOLS REQUIRED
- Floor Jack
- Jack Stands
- Wheel Chocks
- Metric Sockets/Wrenches
- Torque wrench
NOTE:
Pay attention to how the factory spring is oriented when removed and install
the SuperCoil in the same orientation.
support@superspringsint.com
superspringsint.com
IMPORTANT NOTICE: We recommend installation be done by a professional or
persons with sound mechanical knowledge.
INSTALLATION
-
Park the vehicle on a hard, level surface and engage the emergency brake. Place chocks in front and behind wheels to prevent rolling. Observe all safety precautions and wear safety glasses.
-
Raise the front of the vehicle by the axle using a jack rated for the vehicle weight and support the frame with jack stands. Keep the jack in place supporting the weight of the axle.
-
Remove the front wheels.
-
Unbolt the sway bar from sway bar end links.
-
Unbolt the track bar from the frame.
-
With the axle still supported, unbolt the lower shock bolts from the axle.
-
Care˙lly lower the axle just enough to remove the factory coil springs and be careful to avoid putting stress on the ABS and brake lines.
NOTE : Pay attention to how the factory spring is oriented when removed and install the SuperCoil in the same orientation. -
Remove the factory coil isolators from the factory coils and place them on the SuperCoils.
-
Install the SuperCoils. Be sure they are rotated so the ends of the springs are located correctly. Raise the axle enough to connect the shocks to the axle. Torque the shock bolts to factory speciÿcations.
-
Reconnect the track bar to the frame and torque the bolt to factory speciÿcations.
-
Reconnect the sway bar and torque the bolts to factory speciÿcations.
-
Install the wheels and torque the lug nuts to factory speciÿcations.
-
Raise the vehicle and remove the jack stands. Care˙lly lower the vehicle to the ground.
-
Remove the wheel chocks from in front and behind the rear wheels.
-
Register the warranty for your SuperSprings International part. A warranty card can be found in the box your part came in.
support@superspringsint.com
superspringsint.com
PART NUMBER
SSC-52
BEFORE YOU BEGIN
PRIMARY APPLICATIONS REAR SUSPENSION FOR:
-
RAM 2500 4 X 2 (2014 – present)
-
RAM 2500 4 X 4 (2014 – present)
PARTS LIST
| Item | Part # | Description | QTY |
|---|---|---|---|
| A | 202052 | SSC-52 Coil Spring | 2 |
TOOLS REQUIRED
- Floor Jack
- Jack Stands
- Wheel Chocks
- 8mm Socket/wrench
- 16mm Socket/wrench
- 17mm Socket/wrench
- 18mm Socket/wrench
- 21mm Socket/wrench
- Torque wrench
NOTE:
Pay attention to how the factory spring is oriented when removed and install
the SuperCoil in the same
orientation.support@superspringsint.com
superspringsint.com
IMPORTANT NOTICE: We recommend installation be done by a professional or
persons with sound mechanical knowledge.
INSTALLATION
-
Park the vehicle on a hard, level surface and engage the emergency brake. Place chocks in front and behind wheels to prevent rolling. Observe all safety precautions and wear safety glasses.
-
Raise the rear of the vehicle by the axle using a jack rated for the vehicle weight and support the frame with jack stands. Keep the jack in place supporting the weight of the axle.
-
Remove the rear wheels.
-
Unbolt the rear sway bar end links from the chassis.
-
Unbolt the track bar from the axle.
-
With the axle still supported, unbolt the shocks from the axle.
-
Care˙lly lowers the axle just enough to remove the factory coil springs and be careful to avoid putting stress on the ABS and brake lines.
NOTE : Pay attention to how the factory spring is oriented when removed and install the SuperCoil in the same orientation. -
Remove the factory coil isolators from the factory coils and place them on the SuperCoils.
-
Install the SuperCoils and raise the axle enough to connect the shocks to the axle. Torque the shock bolts to factory speciÿcations.
-
Reconnect the track bar to the axle and torque the bolt to factory speciÿcations.
-
Reconnect the sway bar links to the chassis and torque the bolts to factory speciÿcations.
-
Install the wheels and torque the lug nuts to factory speciÿcations.
-
Raise the vehicle and remove the jack stands. Care˙lly lower the vehicle to the ground.
-
Remove the wheel chocks from in front and behind the front wheels.
-
Register the warranty for your SuperSprings International part. A warranty card can be found in the box your part came in.
support@superspringsint.com
superspringsint.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>