LUMASCAPE LS1252 Step Light Instruction Manual

: June 13, 2024
: LUMASCAPE

Table of Contents

Tools Required
Wiring Designations
Dimensions
CUSTOMER SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUMASCAPE LS1252 Step Light

Speciation

MODEL	LS1252
PART NUMBER	LS1252 – 09 D xxx xx xx 01 xx xx

LS1252 – 09 D xxx xx xx 09 xx xx
INSTALLATION TYPE| Wall-Mount (Recessed)
IP RATING| IP66/67
SUPPLY VOLTAGE| 220-240 Vac, 50 Hz (International)
120/277 Vac, 60 Hz (North America)
INSTRUCTIONS COVER| Single Color (Non-Dimmable)
Single Color Dimming (DALI, 0-10 V)
DIMENSIONS (LxWxH)| Refer to included drawings
WEIGHT| 2.7 lb (1.2 kg)
AMBIENT TEMPERATURE| 0°F to 104°F (-18°C to 40°C)

Tools Required Luminaire

Included Components

Instructions
Luminaire
2 mm Allen Key

Tools Required

Do Not Use Power Tools on Screws
Keep Electronics Free From Dirt and Moisture
Keep Away from Flammable Materials
Do Not Hose or Pressure Clean
Do Not Use Silicone On Outside Surface
Do Not Cut Cable to the Luminaire

Assembly Instructions

CONCRETE WALLS

BRICK

DRYWALL

CONCRETE WALLS/BRICK/DRYWALL

Wiring Designations

Designation	Color
Active	Black
Neutral	White
Earth/Ground	Green / Yellow
Dim +	Purple
Dim –	Gray

Do not Hi-Pot test

Dimensions

Please read and follow all safety instructions carefully. Failure to do so will void warranty.

WARNING – Product Warranty is void if product is not installed as per installation instructions and in compliance with all local and provincial codes.

Ensure installation complies with local electrical rules and regulations.
All electrical work must be performed by a licensed electrician.
Protective earth; protective ground (symbol 7).
For LED Options 2,700K, 3,000K, Red, Green, Blue, RGBA, RGBW, Tunable White:
This product contains a light source of energy efficiency class G.
For LED Options 3,500K, 4,000K, 5,000K:
This product contains a light source of energy efficiency class F.
All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting luminaire as it may become hot.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
The light source contained in this luminaire shall only be replaced by Lumascape or their service agent.
Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 23’ (7 m) is not expected (symbol 13)
Basic insulation has been maintained between line voltage and the control conductors.
To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
Ensure mains input power is surge protected.
Never make or break connections while the circuit is energized.
Do not make modifications or alter the product.
Keep luminaire clean and free of debris.
Only clean with warm water.
Do not use chemicals or abrasives to clean luminaire as this may void the product warranty.
Connections are to be kept clean and dry at all times.
Suitable for use indoors or outdoors.