Immax 08969L LED Lamp Beam with Qi Wireless Charging + Night Backlight User Manual
- June 4, 2024
- immax
Table of Contents
Immax 08969L LED Lamp Beam with Qi Wireless Charging + Night Backlight User
Manual
Specifications
- Product number: 08969L
- Working temperature: -20-50°C
- Rated power: 18W
- Wireless power: 10W
- Rated voltage: 12V/2A
- Color temperature: 2800K – 4000K- S000K
POWER CONNECTION
Insert the power adapter connector into the socket behind the luminaire.
Warning:
Use only the original power supply, do not use an extension cord or splitter,
in which case the product may not function properly.
Do not use an adapter that does not match the 24 V output.
If the lights flicker or are noisy, check the power supply in time.
Do not connect the metal point of the adapter with other metals, otherwise
permanent damae to the product or dangerous damage may occur.
The included adapter is for this product only and is not intended for other
uses.
BRIGHTNESS SETTINGS
To adjust the brightness of the light: touch the touch control icon (sun)- for
main lighting. Repeated touching selects 3 levels of intensity for the main
lighting, in order – low light – medium light – high light – off.
A long touch of the switch triggers cold, natural or warm white light.
The default setting is low light when switched on.
ADJUSTING THE BRIGHTNESS OF THE NIGHT LIGHT
Adjust the brightness of the light: touch the touch control icon for night
lighting (moon).
Repeatedly touch to select 3 levels of night light intensity, in order – low
light – medium light – high light – off.
The default setting is low light when switched on.
QI WIRELESS CHARGING
Wireless charging function If your devices support Qi wireless charging, simply place them on the base of the lamp and your device will start charging.
Tips:
Your device is charging – the charging indicator lights up red.
Device fully charged – charging indicator glows green.
Abnormal charging – charging indicator flashes red.
ADJUSTING THE LIGHTING ANGLE
Adjust the lamp arm vertically to illuminate the area to any angle from 0 – 180°.
Tip: The range of the lamp arm is 180° up and down. Do not over-adjust
the moving part of the product joint to avoid damaging the function of the
lamp joint.
Product list
Note: Product pictures are for reference only.
Product image may show slight differences from the actual product.
Warning:
- Surface cleaning – wipe the lamp with a dry, soft cotton cloth, do not use any other cleaning products.
- The light source is irreplaceable.
- If the product malfunctions, do not repair or disassemble the product yourself, mechanical damage could occur and the product will lose its right to claim procedure.
You can contact the manufacturer for maintenance.
Product Warranty
The warranty service of this product is strictly in accordance with consumer regulations and the Product Quality Act in the Czech Republic.
Warranty Terms and Conditions
The product warranty is void if:
- Unauthorized maintenance, improper use, mechanical damage any part of the product, absorption or degradation of liquid, altered or torn product label, or without a product label at all.
- Exceeding the warranty period; (2 years)
- Damage caused by force majeure;
- Man-made performance failures, including use of dimmer/undesignated Voltage/Uncertain Environment.
Materia
| Hazardous substance
---|---
(Pb)| ( H g)| (Cd)| (Cr(VI))| (PBB)|
(PBDE)
Metal
| X| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0|
0
Wire
| 0| 0| 0| 0| 0| 0
PCBA board| 0| 0| 0| 0| 0|
0
The form is based on standard of SJ/T 11364:
0 : The hazardous substance is under the limit of the standard of GB/T
26572 in all homogeneous material of the component. GB/T 26572 in at least one
homogeneous material of the componenet.
x : The hazardous substance is in excess of the standard of
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU
www.immax.cz
Designed in the Czech Republic, manufactured in China
