Immax 07229L NEO PINNA Smart Wall Mounted 80cm 34W 2378lm Black Instruction Manual
- June 13, 2024
- immax
Table of Contents
Immax 07229L NEO PINNA Smart Wall Mounted 80cm 34W 2378lm Black
Product Information:
- Product Name: Immax NEO PINNA 80cm Wall Lamp
- Color: Black
- Power: 34W
- Luminous Flux: 2378lm
- Wireless Protocol: Zigbee 3.0
Product Usage Instructions
- Choose a suitable location on the wall for installing the Immax NEO PINNA wall lamp.
- Ensure that the installation area is free from any obstructions or electrical wiring.
- Carefully unpack the wall lamp and all its components.
- Locate the mounting bracket included in the package.
- Hold the mounting bracket against the wall at the desired height and mark the positions for drilling holes.
- Drill holes into the marked positions using an appropriate drill bit.
- Insert wall plugs into the drilled holes.
- Align the mounting bracket with the drilled holes and secure it to the wall using screws.
- Connect the wiring of the Immax NEO PINNA wall lamp to the electrical supply. Ensure proper insulation and connection according to local regulations.
- Attach the lamp body to the mounting bracket by aligning the slots and gently sliding it into place.
- Make sure the lamp is securely attached to the mounting bracket.
- Turn on the electrical supply and test the functionality of the wall lamp.
- If using Zigbee control, follow the manufacturer’s instructions to pair and control the lamp wirelessly.
Note: For detailed safety instructions and troubleshooting, please refer to the complete user manual.
Installation manual for wall lamp
Immax NEO PINNA 80cm 34W 2378lm black Zigbee3.0
ASSEMBLY
The technical parameters for a given model can be found on the label on the package or on the website www.immax.eu under the catalogue number of the product.
www.immax.cz
www.immax.eu
Vyrobeno v PRC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>