Commercial Electric MB-64102 Soundbar Bracket User Guide
- June 13, 2024
- Commercial Electric
Table of Contents
Commercial Electric MB-64102 Soundbar Bracket
Product Information
The MB-64102 Soundbar Bracket is designed for mounting below or above wall- mounted 23-65 inch TVs. It is suitable for soundbars and has a weight capacity of 33 lbs (15 kgs). The bracket has been tested to support TVs with diagonal screen sizes between 23 inches and 65 inches.
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this wall mounting system. We strive to continually
create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you
for choosing Commercial Electric!
Safety Information
Before you begin, carefully read and understand the instructions in this manual. Please follow the instructions in the order presented in this manual and observe all warnings and cautions.
- WARNING: A Warning alerts you to the possibility of serious injury or death if you do not follow the instructions.
- CAUTION: A Caution alerts you to the possibility of damage to or destruction of the equipment if you do not follow the corresponding instructions.
- WARNING: Failure to provide adequate structural strength for this component can result in physical injury and/or damage to equipment. It is the installer’s responsibility to make sure the structure can support the weight of all equipment. Reinforce the structure as required before installing the component.
- WARNING: Safety measures must be observed at all times during the installation of this product. Use proper safety gear and tools during the installation process to prevent physical injury.
- CAUTION: Do not install on a structure that is prone to vibration, movement, or chance of impact. Doing so could result in damage to the soundbar and/or mounting surface.
- CAUTION: Do not install near a heater, fireplace, direct sunlight, or any other source of direct heat. Doing so could result in damage to the soundbar and could increase the risk of fire.
- WARNING: This soundbar bracket is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in collapse of the bracket and its accessories causing possible injury. This bracket has been tested to support 33 lbs. (15kgs). Use with products heavier than the rated weights indicated may result in instability causing possible iniury.
TOOLS REQUIRED (NOT INCLUDED IN THE PACKAGING)
WARRANTY
The manufacturer warrants that it will replace or repair this item, free of charge, at the manufacturer’s sole discretion, should it prove defective in materials or workmanship. This warranty does not apply to:
- Normal wear and tear
- Friction damage
- Coating defects
- Defects caused by loosened screws, nuts, or bolts
- Improperly mounting the bracket to the wall
- Improperly installing the bracket to the display
- Failure to properly follow installation instructions
- Modification or repairs not made or authorized by the manufacturer
- Loading beyond permitted load
- Intentional misuse
Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
Pre-Installation
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
NOTE: The hardware included is suitable for mounting to walls made of
brick, solid concrete, or wood studs covered with drywall. If your mounting
situation is different, please consult a qualified installer or contact
customer service at 1-877-527-0313 or
visit www.HomeDepot.com.
| Part | Description | Quantity |
|---|---|---|
| AA | Screw (size M6x14,M6x20,M8x20,M6x30,M8x30) | 4 each |
| BB | Spacer (size Φ15xΦ8×5 and Φ15xΦ8×15) | 8 or 4 |
| CC | Washer | 2 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Bracket | 2 |
| B | Extension bracket | 2 |
| C | Bolt | 4 |
| D | Hex nyloc nut | 4 |
| E | Screw (size M4x14) | 2 |
| F | Screw (size M5x14) | 2 |
| G | Screw (size M6x14) | 2 |
| H | Washer | 2 |
| I | Flat thread fastener | 2 |
| J | Flange hex lock nut | 2 |
INSTALLATION
-
Identifying the screw diameter to use
To ensure proper mounting of the brackets to your TV, this mounting system includes several sizes (M6 and M8) of screws (AA), washers (CC), and spacers (BB) that can be used in various combinations. Combinations are determined by the back style of the TV (flat, curved, or recessed) and the diameter and depth of those holes.- Select the screw diameter to use by inserting the various sized screws (M6 and M8) into the mounting holes in the back of your TV.
CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short may cause your TV to fall from the mount.
- Select the screw diameter to use by inserting the various sized screws (M6 and M8) into the mounting holes in the back of your TV.
-
Identifying the screw length to Use
- Insert a straw or toothpick into one of the mounting holes on the back of your TV. If your TV is curved or recessed, place the proper sized spacer on top of one of the mounting holes first.
- Use a pencil to mark the depth of the mounting hole.
- Determine the proper screw length to use by comparing the mark with the various screws provided.
-
Attaching the brackets to soundbar
- For small size soundbar:
- Use the washers (H) and screws (E/F) to attach the brackets (A,B) to the soundbar with round hole pattern.
- Use the flat thread fasteners (l) and flange hex lock nuts (J) to attach the brackets (A,B) to the soundbar with keyhole pattern.
- For large size soundbar:
- Connect the brackets (A,B) and extension brackets (B) using the bolts (C) and hex nyloc nuts (D).
- Use the screws (G) or the screws (E/F) and washers (H) to attach the brackets to the soundbar with round hole pattern. Use the flat thread fasteners (I) and flange hex lock nuts (J) to attach the brackets to the soundbar with keyhole pattern.
-
Attaching the soundbar to the TV
- For small size soundbar:
- An extra TV mount is required.
- Attach the TV mounting arms and the brackets (A) to the four holes on the back of the TV as shown.
- For large size soundbar:
- An extra TV mount is required.
- Attach the TV mounting arms and soundbar brackets to the four holes on the back of the TV as shown.
-
Hanging the TV on the TV mounting plate
Questions, problems, missing parts? Before returning to the store, call
Commercial Electric Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>