1Mii B06LL Mini Bluetooth Music Receiver User Manual

June 13, 2024
1Mii

1Mii B06LL Mini Bluetooth Music Receiver

1Mii-B06LL-Mini-Bluetooth-Music-Receiver-product  

In the Box

  • A. Bluetooth adapter
  • B. 5V power cable
  • C. 3.5mm to RCA cable
  • D. User manual

1Mii-B06LL-Mini-Bluetooth-Music-Receiver-fig-1

Product Description

1Mii-B06LL-Mini-Bluetooth-Music-Receiver-fig-2

Installation diagram

1Mii-B06LL-Mini-Bluetooth-Music-Receiver-fig-3

Application scenario
It can turn all wired speakers into Bluetooth ones. Enjoy wireless music, free of harassment from any wires or cords.

Instructions for operation

  • Connect your speaker to the adapter audio out port with the audio cable provided (3.5mm/RCA cable).
  • Press the C button to power it on.
  • Pairing Pair the adapter with your Bluetooth-enabled phone/PC/tablet.
  • Set the adapter into the pairing mode, the LED flashes Blue / Red alternately fast.
  • First-time use: The adapter will auto-enter the pairing mode (with clear memory).
    • Afterward: Long press the button to enter the pairing mode.
    • (The LED flashes Blue / Red alternately fast)
  • Activate bluetooth on your phone or another device and click “BOGAPTX-LL” to connect. O
  • Wait for the connection (For quick pairing, better to keep both devices within 1 meter when pairing).
  • Enjoy your music.

Pair and connect two devices simultaneously:

  • Pair with the first device by following the previous instructions in the “Installation diagram” section.
  • Pair with the second device.
  • Long press button to enter the pairing mode again. the LED will flash Blue and Red.
  • Activate bluetooth on the second device and click “B06APTX-LL” to pair. ©

Note : You can only play music on one device at a time, therefore, if you want to play a music on the second device, you need to pause the music on your first device before you play it.

Charging method

  • Plug in the charging cable to charge the receiver, the LED runs in steady red.
  • When the battery is fully charged, the indicator will off.

Reset device
If the receiver cannot be connected or work properly, please refer to the following method to reset the device: press and hold the wIl/® and 3D buttons together for 10 seconds, the lights flash purple alternately 3 times, Then restart the device, clear the device’s connection record, reset successfully.

Product Parameters

  • Model Number: B06APTX-LL O
  • Product Name: Bluetooth Receiver
  • Bluetooth Version: 5.0
  • Operational range: indoors: up to 50-70ft (without obstacles) outdoors: up to 164ft (without obstacles)
  • Input voltage/ current: DC5V == 500mA
  • Charging time: About 2.5 hour
  • Working duration: About 12 hours
  • Operating temperature: -10°C ~ 45°C
  • Storage temperature: -20°C ~ 60°C
  • Product size: 60×54×23mm
  • Product weight: 35g

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Any questions? Contact:support@1mii.com
(Response Time:4-24h,excl. holidays)

MANUFACTURER

  • ShenZhen 1Mii Technologies Limited.
  • Address: 4th FI, Bldg B, Runfeng Industrial Park, No. 4197 Baoan Blvd.,
  • Gushu Community, Xixiang St., Baoan Dist., Shenzhen, China.

FAQs

What is the 1Mii B06LL Mini Bluetooth Music Receiver?

The 1Mii B06LL Mini Bluetooth Music Receiver is a compact device that allows you to stream music wirelessly from your Bluetooth-enabled devices to non- Bluetooth audio systems.

How do I set up the 1Mii B06LL Mini Bluetooth Music Receiver?

Setting up the 1Mii B06LL is simple. Plug it into your non-Bluetooth audio system using the provided cables, put it in pairing mode, and connect your Bluetooth device to it.

What is the range of the 1Mii B06LL Bluetooth Music Receiver?

The 1Mii B06LL has a Bluetooth range of up to 164 feet (50 meters), providing a strong and stable connection.

Is the 1Mii B06LL compatible with all Bluetooth devices?

Yes, the 1Mii B06LL is compatible with most Bluetooth-enabled devices, including smartphones, tablets, and laptops.

Can I use the 1Mii B06LL with my car stereo?

Yes, you can use the 1Mii B06LL to add Bluetooth connectivity to your car stereo system.

Does the 1Mii B06LL support aptX audio codec?

Yes, the 1Mii B06LL supports aptX codec for high-quality audio streaming when connected to aptX-compatible devices.

How many devices can I pair with the 1Mii B06LL at once?

The 1Mii B06LL can pair with two devices simultaneously, allowing you to switch between them seamlessly.

Does the 1Mii B06LL have a built-in battery?

No, the 1Mii B06LL is powered through a USB adapter or a USB port on your audio system, so it doesn't have a built-in battery.

What audio output options does the 1Mii B06LL have?

The 1Mii B06LL has both 3.5mm and RCA audio output options, making it compatible with a wide range of audio systems.

Can I use the 1Mii B06LL to stream music to multiple speakers?

Yes, you can use the 1Mii B06LL to stream music to multiple speakers by connecting it to a compatible audio distribution system.

Is there a mobile app for controlling the 1Mii B06LL?

Yes, there is a mobile app available for iOS and Android devices that allows you to control and customize your 1Mii B06LL settings.

Does the 1Mii B06LL come with a warranty?

Yes, the 1Mii B06LL typically comes with a manufacturer's warranty to ensure the product's quality and performance.

Video-Introduction

Downlaod This PDF Link:1Mii B06LL Mini Bluetooth Music Receiver User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals