STEAM IRON WITH
AUTO-SHUT OFF FUNCTION
Model: SI-2098

(This instruction manual covers various colour versions of the appliance)

INTENDED USE

The steam iron with auto shut-off function is intended for ironing fabrics. It is an ideal appliance for those who value usage convenience . The appliance’s steam burst function enables it to iron out stubborn wrinkles perfectly .
Following the instructions contained in this manual will ensure safe installation and use of the appliance .
The appliance is intended for indoor use for private purposes . The iron is not intended for use in industrial conditions or for commercial purposes.

TECHNICAL SPECIFICATIONS

SAFETY INSTRUCTIONS

1. The device can be used by children from 8 years of age and  people with reduced mobility, sensory or mental skills, or without appropriate experience or knowledge, if they are supervised by people responsible for their safety or have been trained by such people and understand the dangers related to with the use of the device . The device is not a toy . Children are not allowed to clean or maintain the device on their own
2. Keep the steam iron and its cord out of the reach of children under the age of 8 when it is connected to the mains or if it is cooling down after use .
3. Do not leave the iron unattended when it is connected to the mains.
4. Before filling the water tank or using the remaining water n the tank, disconnect the plug of the iron from the electricity supply .
5. The iron must be used on a stable and flat surface and must be placed aside .
6. The iron should not be used if it has been dropped, shows signs of damage or is leaking water .
7. The water inlet cover cannot be opened during use. Fill the water tank as described in section 7.2 FILLING THE WATER TANK.
8. Before placing the iron on its base, make sure that the surface on which the iron is placed is stable .
9.  If the supply cord is damaged, it must be replaced by  the  manufacturer, its service agent or similarly qualified persons in order to avoid a hazard .
10. Warning! Risk of burns! The soleplate becomes very hot during use .
11. Warning! Never touch the soleplate of the iron when it is switched on! Danger of burns!
12. Warning! Do not touch hot metal parts, hot water or steam to avoid burns .
13. Pour only water into the tank . The use of distilled water is recommended .
14. Be especially careful when there are children in the vicinity of the device!
15. Do not immerse the device, cord and plug in water or in any other liquids! Be especially careful when pouring water into the tank .
16. Do not touch the device with wet hands .
17. Never direct the steam jet at other people or animals .
18. Never direct the steam jet directly at electrical devices or devices containing electrical components (TV, radio, electric heater) .
19.  Do not direct the steam jet at unprotected wooden surfaces, unsuitable joints, cold glass or plastics .
20. Never turn the device upside down or lay it on its side when it is turned on .
21. Take care when emptying the water tank – risk of scalding with hot water .
22. To avoid the risk of fire or electric shock, basic safety precautions should be followed when using electrical appliances, especially when children are present .
23. A device for home use . Only use the device for its intended purpose . Do not use for other purposes other than those for which it is intended .
24. Before starting operation, the power cord should be carefully unwound .
25. Make sure that the power cord does not touch the hot soleplate of the iron .
26.  After use, switch off the iron, disconnect it from the mains, and then place the  appliance in an upright position. Warning! The iron will continue to heat up for a while.
27. When the appliance is not in use or before cleaning, disconnect the plug from the socket. Allow the device to cool down before cleaning.
28. Do not cover the device when in use . If the appliance is covered or comes into contact with flammable material, there may be a risk of fire.
29. Never iron clothes worn on them and direct the steam jet at people .
30. Do not add fragrances, vinegar or any other chemicals to the water tank, as they may seriously damage the device .
31. Pay attention to the water level in the tank . Too much water in the tank may cause it to overflow during ironing. Too little water may prevent you from working with a steam boost .
32. Do not touch the soleplate of the iron during or immediately after ironing as it is hot .
33. Do not wrap the power cord around the iron or the base until the iron is completely cold .
34. Do not attempt to disassemble any part of the device . There are no repair parts inside the iron .
35. Burns may be caused by contact with hot parts of the iron, steam and hot water . Hot water may be in the water tank and leak out when the iron is turned upside down .
36. Do not open the water filler lid while ironing.
37. Keep the instructions and, if possible, the packaging .
38.  If the device is passed on to other people, make sure that these operating instructions are given with the device .
39. The electronic version of the manual is available at www.instrukcje.vershold .com

EXPLANATION OF SYMBOLS

|  Read this instruction manual
---|---
****| Product compliant with requirements prescribed in the applicable European Union directives
| Disposal of waste electrical and electronic equipment – see the DISPOSAL section of this manual
| Appliance intended for indoor use .
| Unplug the appliance .
| Trademark indicating that the manufacturer has madea financial contribution to the development and operation of a packaging materials recovery and recycling system .
| Recycling code identifying the material from which the packaging is made – corrugated cardboard.
| Caution! Hot surface . Risk of burns .
| Segregate sign – Labeling indicating the need for waste segregation . .
| Packaging: waste – Designation of the container to which the waste should go .
| Designation of type of waste bin for the packaging elements PLASTIC/METAL .

Symbols in monochrome printout only for illustration .

OVERVIEW

1.  Spray nozzle
2. Water inlet cover
3. Steam burst power adjustment slider
4. Steam burst button
5. Spray button
6. Handlet
7. Swivel power cord connection
8. Iron heating indicator LED
9. Water reservoir
10. Temperature control knob
11. SELF CLEAN button
12. Ceramic soleplate
13. Container for pouring water

SET CONTENTS

Open the packaging and carefully remove its contents . Make sure that the set is complete and that its components are undamaged . Check that plastic parts are not broken and the power cord is not damaged. If you find that any components are missing
or damaged, contact the vendor and do not use the product . Retain the packaging or dispose of it in accordance with local regulations.
Caution! To keep children safe, do not leave any packaging parts (plastic bags, cardboard boxes, expanded polystyrene elements etc.) freely accessible. Danger of suffocation!

OPERATION

7.1 BEFORE THE FIRST USE
Before first use, remove the film / sticker from the iron’s soleplate (if any).
ATTENTION! The iron may give off some smoke when you use it the first time. This is normal and does not mean that the iron is damaged . The iron should be placed in a well-ventilated room at that time. The iron will stop emitting smoke after a short while. In the event the smoke does not cease, the iron should be unplugged immediately.
ATTENTION! Before you start ironing, check the garment’s laundry care label for the required ironing temperature.
ATTENTION! If the laundry care label contains no information on ironing, but you know the type of fabric, follow the information in the table below. The information provided in the table (see Section 7.3) applies to the base fabric and does not pertain to any finishes, sheen etc.
Textiles with finishing (sheen, wrinkle reduction etc.) are best ironed at slightly lower temperatures.
ATTENTION! First, sort fabrics by ironing temperature: wool with wool, cotton with cotton etc . The iron heats up faster than it cools down . Accordingly, start with fabrics that require the lowest ironing temperature, such as synthetics. Then move to garments that require higher ironing temperatures.

7.2 FILLING THE WATER RESERVOIR
ATTENTION! Use only tap water . If the tap water in your location is very hard, using distilled or demineralized water is recommended . Do not use water that has been chemically descaled .

1. Do not put any objects into the water reservoir .
2. Do not add water while ironing or when the iron is hot .
3. Make sure that the iron is unplugged from the power supply .
4. Set the steam burst power adjustment slider to the “no steam” position,and the temperature control knob to the min ( ) position.
5. Open the water inlet cover .
6. Hold the iron upright and fill the water reservoir (do not exceed the maximum level shown on the side of the iron) using the included measuring cup .
7. Close the water inlet cover .

7.3 DRY IRONING

1. Place the iron upright .

2. Set the steam burst power adjustment slider to the / (no steam)
   position .

3. Plug the cord into an earthed power supply socket .

4. Set the temperature control knob to the ironing temperature required for the given ype of fabric (check the garment’s ironing temperature on its laundry care label) If no such information is available, use the data provided in the table below. Attention! Water may remain in the water reservoir during dry ironing .

5. The indicator light will turn on .

6. When this light goes out, it means that the iron has reached the desired temperature .

| | Material| Temperature| Recommendations
---|---|---|---|---
Nylon Silk Wool Cotton Linen
| OFF-O| Synthetics synthetic fabrics
(e .g . acrylic,polyester)| Low temperature| Always check if the iron’s temperature is right by ironing a part of the article that is not visible when worn or used.
O| Nylon| Low temperature
O O O| Silk| Normal temperature
O O| Wool| Normal temperature
O O-O O O| Cotton| Normal temperature
O O O MAX| Linen| High temperature

ATENTION! Always start ironing with fabrics that require the lowest ironing temperature, then move gradually to materials requiring higher temperatures.
7.4 SPRAY FUNCTION
This function may be used to eliminate the most stubborn wrinkles .

1. Make sure there is enough water in the water reservoir. If not, go to the 7.2 FILLING THE WATER RESERVOIR section .
2.  In order to moisten fabric that is being ironed, press the spray button several times .
   Water will come out of the spray nozzle at the front of the iron .

7.5 STEAM BURST FUNCTION
Set the temperature control knob to the •••Cotton or MAX position, then press the steam burst button . Steam will start coming out of the iron’s soleplate . The steam burst function is useful for removing creases on hanging clothes, curtains etc . This function may also be used during dry ironing .

CAUTION! Never aim the steam jet at people, animals or electric devices!

1. Make sure there is enough water in the water reservoir. If not, go to the 7.2 FILLIN G
   THE WATER RESERVOIR section .

2. Place the iron upright .

3. The temperature control knob should be set at least to the •••Cotton setting .

4.  Plug the cord into an earthed power supply socket .

5. The indicator light will turn on . It will go out when the iron has reached the desired temperature .

6. Press the steam burst button and direct the soleplate at the fabric .

7.6 STEAM IRONING

1. Make sure there is enough water in the water reservoir. If not, go to the 7.2 FILLING
   THE WATER RESERVOIR section .

2. Place the iron upright .

3. The temperature control knob should be set at least to •••Cotton .

4. Plug the cord into an earthed power supply socket .

5. The indicator light will turn on. It will go out when the iron has reached the desirtemperature .

6. Set the steam burst power adjustment slider in the desired position .

7. The iron will give off steam only when in a horizontal position .

8. After you have finished steam ironing, move the steam burst power adjustment slider to the position marked by the “no steam” symbol
   .

7.7 ANTI-DRIP function
The anti-drip system makes it possible to iron event the finest fabrics perfectly.
When the ceramic soleplate cools down and the temperature is too low, the Anti-drip function is automatically activated to prevent water from dripping from the soleplate .
Thanks to this, you can iron the most delicate fabrics without the risk of their spoilage or dirt .

7.8 AUTO SHUT-OFF function

1. Upright position – if the iron remains switched on but not used for about 8 minutes, the incorporated automatic shut-off function will switch the iron off, and the light indicator will start blinking .
2. Horizontal position – if the iron remains switched on but not used for about seconds, the incorporated automatic shut-off function will switch the ir and the light indicator will start blinking.
   To switch the iron on again, just move the appliance and start ironing . If you already finished ironing, unplug the iron immediately after you have noticed activof the AUTO SHUT-OFF system (the light indicator blinks).

7.9 AFTER IRONING

1. Place the iron upright .
2. Unplug the iron from the power supply socket .
3. Wait until it cools down .
4. Empty the water reservoir .
   Attention! Never wrap the power cord around the ceramic soleplate of the iron.

CLEANING AND CARE

8.1 General rules
Proper and regular cleaning will ensure safe operation and extend the life span of the device .
Warning! Before performing cleaning and maintenance operations, turn the appliance off, disconnect it from the power source and let it cool down, so as to avoid burns and electrocution .

1. After you have finished ironing, turn the appliance off and disconnect it from the power source .
2. Wait for about 30 minutes until the appliance cools down .
3. Empty the water reservoir .
4. If necessary, wipe the appliance components dry with a soft cloth .
5. Store the iron in a secure location .

Cleaning

1. Before cleaning the iron wait for its soleplate to cool down .
2.  Wipe the iron’s soleplate and housing with a damp cloth .
3. Never use caustic or abrasive cleaning agents to clean the appliance .
4. Do not use vinegar, chlorine or any other chemical compounds to clean the iron .

Atention!
Do not clean the appliance with any strong chemicals, alkali, abrasive or disinfecting agents, as they may damage the surface of the appliance.
Do not use metal, sharp or rough cleaning accessories, as they may damage the surface of the appliance!
Do not immerse the iron or the power cord in water or other liquids.

SELF-CLEAN function

1. Connect the steam iron to the mains .
2. Fill the water reservoir .
3. Set the temperature control knob to the maximum setting .
4. Wait until the steam iron reaches the desired temperature and the light indicator goes off .
5. Press the SELF-CLEAN button for about 1 minute while holding the iron in a horizontal position above a sink . Boiling water and steam together with rinsed off impurities will be ejected from the openings in the ceramic soleplate .
6. Disconnect the steam iron from the mains .
7. Move the iron to (preferably) an old piece of fabric . This will guarantee that the iron’s soleplate is dry during storage . It is recommended that the iron be stored in an upright position.

TI-CALC system
A special resin filter installed in the water reservoir softens water and prevents scale from accumulating in the soleplate. The resin filter is a durable device and does not need to be replaced .
ATTENTION!
Do not use chemical additives, perfumes or decalcifiers. Failure to observe this rule shall result in forfeiture of warranty rights .

REPAIR

The device does not contain any user-serviceable parts . Do not attempt to repair  the device on your own. Always have the device repaired by a professional. If the power cord is damaged, it must be replaced by the manufacturer, a service centre representative or a properly qualified individual.

STORAGE AND TRANSPORTATON

• Wait until the iron cools down .
• Empty the water reservoir .
• Wrap the power cord around the iron bottom after the iron cools down completely .
• Store the empty iron upright on a stable surface .
• Always keep the device in a dry, well-ventilated location inaccessible to children .
• Protect the device against vibration and shock during transport .

DISPOSAL

Keep the packaging materials out of children’s reach, as the materials can pose a hazard .
The packaging should be disposed of in accordance with local regulations .
Correct disposal of the device:

1. According to the WEEE Directive 2012/19/EU, the crossed-out wheelie bin symbol is used to label all electric and electronic devices requiring segregation .
2.  Do not dispose of the spent product with domestic waste: hand it over to an electric and electronic device collection and recycling centre .
3.  Hazardous components in electronic and electrical equipment have a negative impact on the environment and human health .
4. Plastics contained in the device can be recycled in accordance with the specific marking. By recycling materials and spent equipment you will help to protect the environment.
5. Information on electric and electronic devices collection centres is available from local government agencies or from the vendor .

CE DECLARATION

The device has been designed, manufactured and placed on the market in accordance with the requirements of the „New Approach” Directives and therefore the product has been CE marked and has been issued with a declaration of conformity made available to market regulators .

WARRANTY

In order to claim a product, you must deliver the product to the Customer Service Centeat any Biedronka store.
If you have any product-related questions or problems, write us at:
infolinia@vershold.com or call us at: +48 667 090 903.
Your opinion is important to us . Please rate our product on our page:
www .vershold .com/opinie

1. he Warrantor for this product grants a 36-month warranty valid from the purchase date. Should you find any defect, submit a complaint at the place of purchase.

2. A damaged/defective product means a product failing to provide the features described in the Instruction Manual due to intrinsic properties of the device .

3. The Beneficiary under the warranty shall deliver the device to the Customer Service Point at a relevant store in order to submit a complaint about the equipment. When asserting your rights under the warranty, you need to present proof of purchase (purchase receipt, invoice) together with a description of device defect in as much detail as possible, in particular of the external manifestations of the defect . The warranty excludes products with physical damage other than that caused by the manufacturer or distributor, including specifically any damage resulting from incorrect usage or force majeure . The warranty does not cover products from which the tamper-proof seal has been
   removed and products to which repairs, alterations or structural modifications havbeen attempted .

4.  The warranty does not cover components subject to natural wear and tear during operation .

5. To facilitate defect verification, the product should be returned to the Service complete with all its original components .

6. This warranty for the sold consumer product does not exclude, restrict or suspend  e rights of the buyer arising from statutory warranty regulations covering defects in sold goods pursuant to the Civil Code of 23 April 1964 (Journal of Laws Dz .U .2014 .121) .

7. The warranty shall be applicable within the territory of the Republic of Poland .

Manufacturer (Warrantor):
VERSHOLD POLAND Sp . z o .o .
ul. Żwirki i Wigury 16A
02-092 Warsaw, Poland
Made in China

Manufacturer (Warrantor):
VERSHOLD POLAND Sp . z o .o .ul. Żwirki i Wigury 16A
02-092 Warsaw, Poland
Made in China

hoffen.com.pl

sprytniezhoffen

References

• HOFFEN - Strona główna - HOFFEN
• Wyszukiwanie instrukcji
• vershold.com/opinie

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>