HOFFEN HB-1556 Hand Blender Instruction Manual

June 13, 2024
Hoffen

HOFFEN HB-1556 Hand Blender

Product Information

  • The RCZNY Hand Blender is a versatile kitchen appliance designed for blending and mixing ingredients. It has a model number of HB-1556 and a power rating of 400W. The maximum continuous operating time is 1 minute, followed by a break.
  • The blender is intended for private indoor use only. It should not be used for any other purposes.
  • It is important to ensure that the electrical parameters of the power supply match the specifications indicated on the device’s rating plate before connecting it.
  • The device should not be operated by children under the age of 8 or individuals with limited physical, sensory, or mental abilities, or those lacking experience and knowledge, unless supervised.
  • To prevent accidents, it is essential to read and follow all safety instructions provided in the instruction manual.

Product Usage Instructions

Before Use

  1. Make sure the electrical parameters of the power supply match the specifications.
  2. Prior to first use, clean the device and accessories according to the instructions in section 8 – Cleaning and Maintenance.

Turning On/Off the Device

  1. Connect the device to an AC power supply of 220-240 V~, 50/60 Hz.
  2. To turn on the device, press and hold the power button or TURBO button.
  3. To turn off the device, release your finger from the power button or TURBO button.

Note:
For detailed information on other aspects of using the RCZNY Hand Blender, refer to the complete instruction manual available at http://instrukcje.vershold.com.

(This instruction manual covers various colour versions of the device)

INTENDED USE

  • The device is intended for mixing and blending food products. The device is intended for private household and indoor use only.
  • This device is not intended for use in industrial conditions or for commercial purposes.
  • Following the instructions in this manual will ensure the safe installation and use of the device.

TECHNICAL SPECIFICATIONS

Lot No . POJM210556
Model HB-1556
Power supply 220–240 V~; 50/60 Hz
Power 400 W
Max . continuous operation time/pause time 1 min/1 min

SAFETY INSTRUCTIONS

  1. Read the entire manual before using the device.
  2. The device can be used by children older than 8 years people with reduced physical, sensory, or mental capacity, or people with a lack of experience and knowledge, if they are under the supervision of an adult and use the device safely, in accordance with the instructions for use and understanding threats.
  3. Make sure that children do not play with the device. Warning! Risk of injury in case of misuse.
  4. Cleaning and maintenance of the device may not be performed by children without adult supervision.
  5. If the power cord is damaged, it must be replaced by the manufacturer, service, or a suitably qualified person in order to avoid a hazard.
  6. The device is intended for private indoor use only. Do not use it for other purposes, not in accordance with its intended purpose.
  7. Before connecting the device to the power supply, make sure that the parameters of the electric network correspond to the data on the rating plate of the device.
  8. Before starting operation, unwind the power cord. 9. The power cord should not hang freely or touch hot surfaces.
  9. Do not hang the power cord over the edge of a table or sink.
  10. The device should be connected to an AC 220-240 V ~, 50/60 Hz mains.
  11. Use only the accessories delivered with the device. 13. The maximum operation time of the device is 1 minute. After this time has elapsed, disconnect the device from the power supply and wait 1 minute before restarting it.
  12. To avoid the risk of fire or electric shock, basic safety precautions should be followed when using electrical appliances, especially when children are present.
  13. Disconnect the device from the power supply before changing accessories or approaching moving parts during use.
  14. Always disconnect the device from the power supply when not in use and before cleaning, assembling, and disassembling it.
  15. To prevent electric shock, do not immerse the plug, power cord, or device body in water or other liquids. 18. Do not use the device near flammable fabrics (curtains, carpet), do not place it near high-temperature sources: gas stoves, electric cookers.
  16. Do not cover the device when in use. If the appliance is covered or in contact with flammable material, there may be a risk of fire.
  17. During the operation of the device, do not put your hands or any objects (cutlery, tools, etc.) into the mixing ingredients.
  18. Do not touch moving parts (rotating parts) with your hands, keep fingers, hair, and clothes away from all moving parts.
  19. The device must not be left unattended when it is connected to the mains.
  20. Do not use the device if it is damaged or not functioning properly.
  21. Do not use the device if it has previously been dropped from a height and shows visible signs of damage.
  22. Do not try to open the body or disassemble any part of the device.
  23. The danger of burns! Do not use the appliance to blend boiling liquids and hot fats.
  24. Never add ingredients to the container while the blender is running.
  25. Never point the blades toward yourself or other people’s faces while the device is operating.
  26. Keep the device and its cord away from children under 8 years of age.
  27. Keep this manual and, if possible, the packaging. 31. If the device is passed on to another user, it must be accompanied by this manual.
  28. The electronic version of the manual is available at: http://instrukcje.vershold.com.

EXPLANATION OF SYMBOLS

| Read this instruction manual.
---|---
| Product suitable for contact with food.
| Product compliant with the requirements prescribed in the applicable European Union directives.
| Disposal of waste electrical and electronic equipment – see the DISPOSAL section of this manual.
| Unplug the appliance.
---|---
| Protection class II – in class II devices protection against electric shock is provided by suitable insulation (double or reinforced) which is highly unlikely to fail.
| This appliance is designed for indoor use only.
| A symbol indicating that the manufacturer has made a financial contribution to the development and operation of a packaging materials recovery and recycling system.
| Recycling code identifying the material from which the packaging is made – corrugated board.
| Segregation sign – Labeling indicating the need for waste segregation
| Paper waste – Designation of the container to which the waste should go
| Designation of the relevant waste bin – plastic .

OVERVIEW

HOFFEN-HB-1556-Hand-Blender-fig- \(13\)

  1. On/off switch
  2. High-speed TURBO button
  3. Hand blender body
  4. Blending attachment with blades
  5. Blades
  6. Hanging ring
  7. Power cord with plug 8. Lock tabs

SET CONTENTS

QTY Element
1 Hand blender with blending attachment with blades
1 Instruction manual

Open the packaging and carefully take the device out. Make sure that the set is complete and that its components are undamaged. Check that plastic parts and the power cord are not damaged. If you find that any components are missing or damaged, contact the vendor and do not use the device. Keep the package or recycle it in accordance with the applicable regulations.

Caution!
For the sake of children’s safety, do not leave any packaging materials accessible and unattended (plastic bags, cardboard boxes, Styrofoam etc.). Risk of suffocation!

USE

Before use

  1. Unpack the device and expand the power cord.
  2. Check whether the device power supply parameters match the parameters of the local mains.
  3. Before the first use, clean the device and accessories in accordance with the instruction in point 8 Cleaning and care.

Switching the device on/off
Before blending and mixing food products, they should be prepared accordingly:

  • Cut meat, cheese, onion, garlic etc. into small pieces.
  • In the case of meat, remove bones, cartilage and other hard parts, which might damage or jam the blending attachment blades.
  • When using the device directly when cooking soups, sauces or other dishes, remove the pan/pot from the cooker so that the blender operation part is not overheated.
  1. Connect the device to a 220-240 V 50/60 Hz AC mains.
  2. Switch on the device by pressing and holding the on/off switch or the TURBO switch.
  3. Switch off the device by releasing your finger from the on/ off switch or the TURBO switch.
  4. When you finish using the device, unplug it and leave it to cool down.

Caution!
The stainless steel blade is very sharp. Handle it very carefully.

Maximum continuous operation time of the device must not exceed 1 minute. After this time has elapsed, switch off the device and wait about 1 minute before using it again. Before coming close to any parts which move during operation, disconnect the device from the power source.
If the blade gets jammed during operation, turn the device off immediately. Disconnect the device from the power source and remove the cause of the jam. If the device is operated with the blades jammed, it could damage the device.

Removal/installation of the blending attachment with stainless steel blades
The blending attachment with stainless steel blades should be removed for cleaning.

To remove the blending attachment with stainless steel blades, disconnect the device from the power source (remove the plug from the power outlet), grasp the blender with both hands — hold the handle with one hand, and the blending attachment with the other hand. Then twist the two parts in opposite directions, as in the picture below. When removing/ installing the attachment, it should be pointed down.

Reference drawing.

To install the blending attachment with stainless steel blades, perform the steps for its removal in reverse order.

CLEANING AND CARE

Correct and regular cleaning will improve the safety and extend the lifespan of the device.

Warning!
Before performing cleaning and maintenance operations, turn the device off, disconnect it from the power source and let it cool down, so as to avoid burns and electric shock.

  1. It is recommended to wipe the body of the hand blender with a soft, dry or damp cloth or a paper towel and let it dry. Never immerse it in water or other liquids!
  2. Wash the shredding attachment with the blades in lukewarm water with a neutral detergent and leave it to dry.
  3. For stubborn debris, use a wooden or plastic spatula or a thin, soft brush. Residues in hard-to-reach places can also be removed with a cotton swab.

Caution!

  • Do not clean the device with any strong chemicals, alkali, abrasive or disinfecting agents, as they may damage the surface of the device.
  • Do not use metal, sharp or rough cleaning accessories, as they may damage the surface of the device!
  • Do not immerse the hand blender handle or the power cord in water or other liquids.

Observe caution when cleaning the blades — they are sharp!

REPAIR

  • The device does not contain any user-serviceable parts. Do not attempt to repair the device on your own. Always have a specialist perform repairs.
  • If the power cord is damaged, it must be replaced by the manufacturer, a service centre representative or a properly qualified individual.

STORAGE AND TRANSPORTATION

  1. Make sure the device is clean and completely dry.
  2. Always keep the device in a dry, well-ventilated place inaccessible to children.
  3. Protect the device against vibration and shock during transport.

DISPOSAL

  • Keep the packaging materials out of children’s reach, as the materials can pose a hazard.
  • The packaging should be disposed of in accordance with local regulations.

Correct disposal of the device:

  1. According to the WEEE Directive 2012/19/EU, the crossed-out wheelie bin symbol is used to label all electric and electronic devices requiring segregation.
  2. Do not dispose of the spent product with domestic waste: hand it over to an electric and electronic device collection and recycling center.
  3. Hazardous components in electronic and electrical equipment have a negative impact on the environment and human health.
  4. Plastics contained in the device can be recycled in accordance with the specific marking. By recycling materials and spent equipment you will help to protect the environment.
  5. Information on electric and electronic device collection centers is available from local government agencies or from the vendor.

CE DECLARATION

The device has been designed, manufactured, and placed on the market in accordance with the requirements of the „New Approach” Directives, and therefore the product has been CE marked and has been issued with a declaration of conformity made available to market regulators.

WARRANTY

In order to lodge a complaint or file a claim related to the product, the appliance has to be delivered to the Customer Service Desk at any store in the Biedronka chain.

Should you have any questions or issues related to the use of the product or to lodging a complaint, send them to the following e-mail address:

Your opinion matters to us. Evaluate our product at www.vershold.com/opinie.

  1. The Warrantor of this product grants a 36-month warranty valid from the date of purchase. If any defect is found, a complaint about the product should be lodged at the point of purchase.

  2. A defective/damaged product is a product failing to provide the features described in the User’s Manual due to intrinsic properties of the device.

  3. The Beneficiary under the warranty shall deliver the device to the Customer Service Point at a given store in order to submit a complaint about the equipment.
    When asserting your rights under warranty, you need to present the proof of purchase (receipt, invoice) together with a description of the device defect in as much detail as possible, in particular of the external manifestations of the defect.

  4. The warranty excludes products with physical damage other than that caused by the manufacturer or distributor, including specifically any damage resulting from incorrect usage or force majeure.

  5. The warranty does not cover products from which the tamper-proof seal has been removed, or products to which repairs, alterations or structural modifications have been made or attempted.

  6. The warranty does not cover components subject to natural wear and tear during operation.

  7. It is recommended that the complete product be submitted together with the complaint so as to facilitate service operations.

  8. This warranty for the sold consumer product does not exclude, restrict or suspend any rights of the Buyer related to laws and regulations concerning warranties for defects in sold items pursuant to the provisions of the Civil Code of 23 April 1964 (Journal of Laws Dz.U.2014.121).

  9. The warranty shall be applicable within the territory of the Republic of Poland.

Manufacturer (Warrantor):
VERSHOLD POLAND Sp. z o.o. ul. Żwirki i Wigury 16 A 02-092 Warszawa, Poland.

Made in China.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hoffen User Manuals

Related Manuals