LNC CA2421-2W Wall Lamp Instruction Manual
- June 13, 2024
- LNC
Table of Contents
LNC CA2421-2W Wall Lamp
Product Information
- Product Name: CA2421-2W
- Product Type: Fixture
Product Usage Instructions
-
Before starting the installation process, consult the local electrical codes for wiring and grounding requirements.
-
Make sure to read and save these instructions for future reference.
-
WARNING : To avoid the risk of electrical shock, shut off power before installing or servicing the fixture.
-
Attach the mounting plate to the outlet box using two mounting screws.
-
Pull out the wires and grounding wire from the outlet box.
-
Make wire connections using wire nuts as follows:
- Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
- Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
- Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting strap with the green grounding screw.
- Then connect it to the house grounding wire with the wire nut.
-
Carefully put the wires back into the outlet box.
-
Attach the back plate to the mounting plate by inserting screws and securing it with two nuts.
CAUTION : Use silicone caulking compound to completely caulk where the back plate meets the wall surface. This prevents water from seeping into the outlet box. -
Turn on the power at the fuse or circuit box.
Please follow these instructions carefully to ensure proper assembly and installation of the fixture. If you have any further questions or concerns, refer to the user manual or contact our customer support for assistance.
WARNING
TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE
INSTALLING OR SERVICING THIS FIXTURE
NOTES
- Before installing, consult local electrical codes for wiring and grounding requirements.
- read and save these instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>