LNC TD90083C 4-Light Hemaaolay Fixture Instruction Manual
- June 13, 2024
- LNC
Table of Contents
- LNC TD90083C 4-Light Hemaaolay Fixture Instruction Manual
- Instruction Manual
- Overview
- Assembly Instruction
- Wiring Instruction
- NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
- Assembly Instructio
- Product Specifications
- Product Packaging
- Cleaning
- Safety Information
- CONTACT US
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LNC TD90083C 4-Light Hemaaolay Fixture Instruction Manual
Instruction Manual
Overview
Assembly Instruction
- Place Shade (B) onto Fixture body (A) and screw on Stem (C) to secure
- Link Stem (C) and Canopy (F) by Fixture chain (D). Fix Mounting strap (G) to outlet box with Screw (H). 4.Connect the wires according to the picture above. (Please refer to the wiring instruction for details ) 5.Fix Canopy (F) to Mounting strap (G) with Canopy lock ring (E).
Wiring Instruction
- Insert the green grounding screw into the hole with two raised dimples on the mounting Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
[GROUP A]:
Connect to Black House Wire
| [GROUP B]:
Connect to White House Wire
---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER| BROWN, GOLD OR BLACK WITH TRACER
- Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
- Take your fixture wire(s) from [Group A] and place evenly against theSmooth [GROUP A]
Bare copper wire(Ground) G.Mounting strap
black wire from the outlet box. Do NOT twist wires together before using wire
connectors.
H.Screw
Assembly Instructio
- Fit a wire connector over the wires and screw the connector clockwise until you feel
- Try gently to pull the connector off the If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors
Product Specifications
Input voltage 120V
Rated power 60W MAX × 4 Lamp socket E26
Product Packaging
Fixture body × 1
- Place Shade (B) onto Fixture body (A) and screw on Stem (C) to secure
- Link Stem (C) and Canopy (F) by Fixture chain (D). Fix Mounting strap (G) to outlet box with Screw (H). 4.Connect the wires according to the picture above.
(Please refer to the wiring instruction for details )
5.Fix Canopy (F) to Mounting strap (G) with Canopy lock ring (E).
Cleaning
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.