KUZCO LP45548-UNV LED Linear Pendant Installation Guide

KUZCO LP45548-UNV LED Linear Pendant

Product Information

LED Linear Pendant

The LED Linear Pendant is a stylish and modern lighting fixture designed to enhance the ambiance of any space. It features a sleek design with high- quality materials, providing both functional illumination and aesthetic appeal. The pendant is equipped with LED lights, ensuring energy efficiency and long-lasting performance.

The product comes with a mounting plate, canopy, wire nuts, driver, ceiling anchors, screws, and anchors, providing all the necessary components for installation. The pendant is suitable for use in residential and commercial settings, such as living rooms, dining areas, offices, and retail spaces.

Product Usage Instructions

1. Start by removing the fixture from its original packaging.
2. Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
3. Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws (1e) provided in the hardware package.
4. Secure the mounting plate (1c) to the mounting surface using anchors (1f) and screws (1g).
5. Make proper electrical connections by connecting the black wire to hot L, the white wire to neutral N, and the ground wire to GND, using the wire nuts (1b) provided in the hardware package. Place the driver (4a) in the canopy (2a).
6. Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
7. Mark and install ceiling anchors (3b) with screws (3a) and anchors (3c), ensuring that the opening on the ceiling anchor (3b) faces towards the canopy (2a). The ideal distance between ceiling anchors (3b) is L46-7/8 and W3-15/16.
8. Place the wire onto the pulley (3g), insert it into the ceiling anchor (3b), and secure it with the screw (3f).
9. If necessary, fine-tune the wire length by pushing and holding the wire gripper (2g) and adjusting the wire to the desired length.

Note: The ideal distance of the wire grippers from the canopy is L46-7/8 and W3-15/16.

For further assistance or inquiries, please contact Kuzco Lighting at:

• Address: 19054 28th Avenue Surrey, BC Canada V3Z 6M3
• Phone: 604 538 7162
• Toll-Free: 1-855 85 KUZCO
• Fax: 604 538 7196
• Website: kuzcolighting.com

START FROM HERE

Make sure POWER is COMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage
• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application
• 120-277V input

INSTRUCTION

1. Remove the fixture from its original packaging
2. Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b)
3. Attach the mounting plate (1c) to the electrical junction box (1a) using junction box screws (1e) provided in the hardware package
4. Secure mounting plate (1c) to mounting surface with anchors (1f) and screws (1g)
5. Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package and place driver (4a) in canopy (2a)
6. Attach canopy (2a) to mounting plate (1c) with canopy screws (2b)
7. Mark and install ceiling anchors (3b) with screw (3a) and anchor (3c), opening on ceiling anchor (3b) facing towards canopy (2a). Ideal distance between ceiling anchors (3b) is L46-7/8” and W3-15/16” (See Illustration 1)
8. Place wire onto pulley (3g), insert into ceiling anchor (3b) and secure with screw (3f)
9. Fine tone wire length if necessary, by push and hold wire gripper (2g) and then adjust wire to desired length

Illustration 1

Note: Ideal distance of wire grippers from canopy is L46-7/8” and W3-15/16”

19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
20230314

References

• Kuzco Lighting – Modern Contemporary Lighting.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>