MINKA LAVERY 5723 81 4 In 100W 3-Light Bath Light In Polished Chrome With Clear Seeded Glass Shade Owner’s Manual

June 13, 2024
MINKA LAVERY

MINKA LAVERY 5723 81 4 In 100W 3-Light Bath Light In Polished Chrome With

Clear Seeded Glass Shade

Product Information

The product is an electrical fixture (Item#5723) that requires installation. It includes a mounting plate, ground screw, mounting screws, fixture body, glass shade, socket cup, and ball screws. The fixture is designed to be connected to an outlet box and requires the use of electrical wires for installation. The maximum wattage rating should not be exceeded when installing light bulbs. The product comes with an instruction manual (LA- 2358E) that provides detailed installation instructions.

Product Usage Instructions

  1. Before starting the installation, shut off the power at the fuse box or circuit breaker.
  2. If there is an existing fixture, remove it along with the mounting hardware.
  3. Take out the fixture from the carton and ensure that all parts are included.
  4. Attach the mounting plate to the outlet box using the provided mounting screws. Make sure the side marked GND faces out.
  5. Connect the electrical wires according to the diagram in Fig. 2. Secure all wire connectors properly.
  6. If your outlet box has a ground wire, connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the green screw provided.
  7. Ensure that all wires are carefully tucked inside the outlet box.
  8. Place the fixture body over the mounting plate and secure it with screws.
  9. Put the glass shade over the socket cup.
  10. Insert the ball screws through the decorative arms of the fixture body and glass shade. Once inserted, secure them to the socket cup.
  11. Install the light bulb(s) according to the fixture’s specifications. Do not exceed the maximum wattage rating.
  12. Once the installation is complete, restore power to the outlet box and test the fixture.

Note: The illustration in Fig. 1 is for installation purposes only and may or may not be identical to the fixture purchased. Please refer to the instruction manual (LA-2358E) for detailed instructions specific to your product.

MOUNTING THE FIXTURE (Fig.1)

  1. Shut off the power at the fuse box or circuit breaker. If necessary, remove the old fixture, including the mounting hardware.

  2. Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.

  3. Attach mounting plate (A) to the outlet box using mounting screws (B) (Size: #8-32N*L0.5”). The side of the mounting plate marked “GND” must face out.
    CONNECTING THE WIRES (Fig. 2)

  4. At this point, connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the green screw provided. After the wires are connected, tuck them carefully inside the outlet box.
    FINISHING THE INSTALLATION (Fig.1)

  5. Place fixture body (D) over the mounting plate (A) and secure it with screws (C).

  6. Place the glass shade (F) over the socket cup (G).

  7. Then insert ball screws (E) through the decorative arms of the fixture body (D) and glass shade (F). Once inserted, secure ball screws (E) to socket cup (G).

  8. Install the light bulb(s) (not included) in accordance with the fixture’s specifications. (DO NOT EXCEED THE MAXIMUM WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!) Your installation is now complete. Return power to the outlet box and test the fixture.
    Note: The illustration (Fig.1) in this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

MINKA LAVERY User Manuals

Related Manuals