Allied Telesis AT-GS950 Gigabit Ethernet Smart Switches Owner’s Manual

AT-GS950 Gigabit Ethernet Smart Switches
v1.0.5 to v3.0.7 Software Release Notes

Please read this document before installing the management software.
Switch Models and Management Software
Table 1 lists the AT-GS950 switches and the management software versions.
Table 1: Switch Models, Management Software, and Version Numbers

Non-PoE Models
AT-GS950/8| AT-S113| v2.0.5| v2.0.4
AT-GS950/16| AT-S114| v2.0.5| v2.0.4
AT-GS950/24| AT-S115| v2.0.5| v2.0.4
AT-GS950/48| AT-S116| v3.0.5| v3.0.4
PoE Models
AT-GS950/10PS| AT-S110| v3.0.7| v3.0.6
AT-GS950/16PS| AT-S112| v3.0.7| v3.0.6
AT-GS950/28PS| AT-S126| v1.0.5| v1.0.4
AT-GS950/48PS| AT-S111| v3.0.7| v3.0.6

Product Documentation
Refer to the Allied Telesis web site at www.alliedtelesis.com/support for the latest installation and user guides
Upgrading Management Software
Refer to the AT-GS950 installation and user guides for upgrade instructions. You can find the guides on the Allied Telesis web site at www.alliedtelesis.com/support by searching for “GS950 Series”.

Resolved Issue in New Versions

• Switch ports did not link up with network devices after they were disabled and enabled with the management interface. This is resolved.

Resolved Issues from Previous Versions

• PoE switches displayed PoE status incorrectly on the LEDs and in the web browser management interface, or entered extraneous entries in the event log. Resolved in  v3.0.5 for the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS switches.
• The following Common Vulnerabilities and Exposures (CVE) were resolved in v3.0.5 for the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS switches.

• Loopback Detection did not work correctly when the unit was rebooted after detecting a loop. Resolved in v3.0.5 for the AT-GS950/10PS, AT-GS950/16PS, and AT- GS950/48PS switches.

• The switch discarded UDP packets with a fragment offset of 0 or higher and the destination port 64516 (0xFC04). Resolved in v3.0.5 for the AT-GS950/10PS, AT- GS950/16PS, and ATGS950/48PS switches.

• DHCP Snooping actions were inconsistent when all ports were designated as untrusted.
  Resolved in v3.0.5 for the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS switches.

• DHCP Snooping blocked changing ports’ trusted or untrusted status. Resolved in v3.0.5 for the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS switches.

• PoE switches did not block power to powered devices that required more power than defined by their PoE Classes. Switches now block power to those devices. Resolved  in v3.0.6 for the AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS switches.

• Switches did not update the Runtime Image value in the Switch Information window after firmware updates. Resolved in v3.0.6 for the AT-GS950/10PS switch.

Operational Notes

• The web browser interface may not refresh the Physical Interface window after you enable or disable ports. To update the window, refresh the web browser page or  move to another window and then return to the Physical Interface window.
• The switch may not update the Static Unicast Address Table after you add, delete, or modify static or LACP port trunks during periods of heavy traffic. Traffic  forwarding is not affected. (AT-GS950/48PS switch only.)
• Designating multiple ports as the source ports of the port mirror may cause the switch to drop packets on the destination port. To avoid this, designate only a few ports  at a time as source ports in the port mirror.
• Port egress traffic might exceed the egress rate limit set in storm control.
• Multiple ingress traffic streams with the same Cost of Service (CoS) priority value on a port will be assigned to the same egress queues on the egress ports, but may be transmitted at different rates. The difference between the rates depends on the ports. The smaller the physical distance between egress ports (e.g., ports 1 and 2), the smaller the rate difference. The larger the distance between ports (e.g., ports 1 and 12), the larger the difference.
• SSH is not supported.
• Combo SFP ports must remain in Automatic mode.

Contacting Allied Telesis

For assistance with this product, the Services & Support section of the Allied Telesis web site at www.alliedtelesis.com/services- support has links to the following technical services:

• Helpdesk (Support Portal) – Log onto Allied Telesis interactive support center to search for answers to your questions in our knowledge database, check support tickets,  learn about Return Merchandise Authorizations (RMAs), and contact Allied Telesis technical experts.
• Software Downloads – Download the latest software releases for your product.
• Licensing – Register and obtain your License key to activate your product.
• Product Documents – View the most recent installation guides, user guides, software release notes, white papers and data sheets for your product.
• Warranty – View a list of products to see if Allied Telesis warranty applies to the product you purchased and register your warranty.
• Allied Telesis Helpdesk – Contact a support representative.

To contact a sales representative or find Allied Telesis office locations, go to www.alliedtelesis.com/contact.

Copyright © 2021 Allied Telesis Inc.
All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis Inc. Allied Telesis and AlliedWare Plus are trademarks of Allied Telesis Inc. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesis Inc. reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice.

PN 613-003025 Rev. A
Allied Telesis, Inc.

Documents / Resources

| Allied Telesis AT-GS950 Gigabit Ethernet Smart Switches [pdf] Owner's Manual
AT-GS950, Gigabit Ethernet Smart Switches, AT-GS950 Gigabit Ethernet Smart Switches, Ethernet Smart Switches, Smart Switches, Switches
---|---

References

• Contact Us | Allied Telesis
• Services | Allied Telesis
• Services | Allied Telesis

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>