TRICKFISH Overdrive Preamp Bass Pedal Instruction Manual
- June 1, 2024
- TRICKFISH
Table of Contents
TRICKFISH Overdrive Preamp Bass Pedal
Product Specifications
- OUT: Phone jack output
- DC IN: V DC power input, center pin negative
- IN: Phone jack input
- GAIN: Adjusts the amount of overdrive
- BLEND: Sweeps between wet/dry levels
- OUTPUT: Adjusts the overall output level
- BASS: Boost/cut dB centered @ ~Hz
- MID: Boost/cut dB centered @ ~.kHz
- TREBLE: Boost/cut dB centered @ ~.kHz
- ON: Footswitch toggles effect on/bypass
Product Usage Instructions
Step 1: Power Connection
Start by plugging a VDC adapter into the DC IN jack on the top of the
Overdrive Preamp.
Step 2: Instrument Connection
Connect an instrument cable from your instrument into the IN jack of the
Overdrive Preamp.
Connect another instrument cable from the OUT jack of the Overdrive Preamp to
your amplifier.
Step 3: Engaging the Overdrive
Press the ON footswitch to engage the overdrive circuit. The footswitch LED
will be on.
Step 4: Adjusting Controls
You may begin adjusting the controls of the overdrive and EQ:
- GAIN: Adjusts the amount of overdrive
- BLEND: Sweeps between wet/dry levels
- OUTPUT: Adjusts the overall output level
- BASS: Boost/cut dB centered @ ~Hz
- MID: Boost/cut dB centered @ ~.kHz
- TREBLE: Boost/cut dB centered @ ~.kHz
Frequently Asked Questions (FAQ)
Q: How do I power the Overdrive Preamp?
A: Use a VDC adapter and plug it into the DC IN jack on the top of the unit.
Operation Manual
Congratulations on your purchase of the Trickfish Overdrive Preamp. The
Overdrive Preamp delivers a pleasing soft clipping overdrive, with a dry blend
knob to mix in as little or as much dirt as you desire. Followed by an onboard
band EQ with shelving bass and treble controls, this highly adjustable
overdrive with smart tone shaping allows you to perfectly tailor your sound.
Dial in everything from creamy,
touch-sensitive sparkle to full-on saturated filth, and all things in between.
Whether you’re painting your sound with a creamy, touch-sensitive sparkle or
pushing it to the limits with full-on saturated distortion, our Overdrive
Preamp pedal adapts to your creative vision.
Using the Overdrive Preamp
Start by plugging a VDC adapter into the jack on the top of the Overdrive
Preamp. Connect an instrument cable from your instrument into the IN jack and
an instrument cable from the OUT jack to your amplifier. Press the ON
footswitch to engage the overdrive circiut. The footswitch LED will be on and
you may begin adjusting the controls of the overdrive and EQ.
- OUT: 1/4″ phone jack output
- DC IN: V DC power input, center pin negative
- IN: 1/4″ phone jack input
- GAIN: Adjusts the amount of overdrive
- BLEND: Sweeps between wet/dry levels
- OUTPUT: Adjusts the overall output level
- BASS: Boost/cut 13dB centered @
- 80Hz 8. MID: Boost/cut 15dB centered @ ~1.5kHz
- TREBLE: Boost/cut 15dB centered @ ~4.8KHz
- ON: Footswitch toggles effect on/bypass
