Energizer BTS-106 PowerSound Portable Bluetooth Speaker User Manual
- June 6, 2024
- Energizer
Table of Contents
BTS-106
Specification
Model Name : BTS-106
Cell Type : Lithium-Ion
Battery Capacity : 1200mAh/4.44Wh
Rated Input : 5V/1A (Max.)
Rated Output : 5V/0.5A (Max.)
Bluetooth Version : 5.0
Support : Handsfree, FM, Micro SD Card,
USB Speaker : 40 5W x 2 D52mm
Transmission distance : 10M
Frequency response : 30Hz-20KHz
Dimensions : 188(L)57(W)85(H)mm
Weight : 478g±5g
- Volume Up/Next Button
- Play/Pause
- Volume Down/Previous Button
- Mode Button
- Power On/Off Switch Button
- Recharge Port
- LED Battery Indicator
- Micro SD Card Slot
- USB Flash Drive/USB-A Output Port
Package Content
How to USE?
-
Power Switch: Turn on the power switch on the back of the speaker.
-
Bluetooth: Turn on the speaker to enter Bluetooth pairing mode, enable Bluetooth connection on your device, search and connect to “Energizer_BTS-106”
-
Pause and play: Press the power/play button on the device to play or pause the music.
-
Mode button: Press the mode button to switch to Bluetooth, FM, micro SD card mode, or USB play mode.
-
Volume control: Press the volume up button to increase volume, press the volume down button to reduce volume.
-
Play next/ Previous song: Long press the “+” button to play the next song. Long press the –” button to play the previous song.
-
Micro SD card slot: Insert a micro SD card into the slot, the speaker will automatically switch to SD card mode, or use the mode button. The speaker supports MP3. AAC. WAV, FIAC. APE. WMA, and other formats.
-
USB play mode: Insert a USB flash drive into the USB Port, the speaker will automatically switch to USB Play mode, or switch to USB play mode.
-
USB-A output: Charge your device through the USB-A output port.
-
Recharge port: To charge the speaker, connect the charging cable to your speaker and a power source to begin recharge.
-
LED Battery Indicator: Red light indicates charging. The red light will shut off when the speaker is fully charged.
-
FM mode:
• Long press the play/ pause button (1 sec) to start the automatic tuning.
• Once tuning is done, long-press the “-” button or “+” button to switch between the stations.
• Press the “-” button or “+” button to decrease or increase volume. -
Hands-free mode (Telephone):
• Answer an incoming call: Press the play/pause button
• Reject incoming call: Press and hold the play/pause button
• Recital: Double press the play/pause button
Note: The battery life of this product is based on the user’s activity and volume control.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pan 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy, it is not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferon°e to radio or television reception, which can be determined by turning the equipment off and on. the user Is avenged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment roan outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received. interferon°, which may cause undesired
operation.
RF Exposure Warning Statements:
This equipment complies with FCC reflation exposure Units set forth for an
uncontrolled environment. this equipment shall be installed and operated with
a minimum distance of 20cm between the radiator & body.
PowerSafe Management
Guarantees against short circuits and over-charging for your power bank and
devices.
Customer Service
For any questions about the product, please contact us at
[email protected]
Safety Instruction
- Avoid water, heat, fire, penetration of the battery, and severe drops at all times.
- Do not insert other objects into the USB ports other than the USB connectors.
- Once the product is fully charged, your power pack automatically shuts off to save power.
- During charge & recharge, the battery may feel slightly warm.
- Do not clean the battery with water or other cleaning products, clean the exterior with a lightly wetted cloth or napkin
- Any intentional and physical damage to the battery will not be under the warranty conditions
- Battery storage temperature is between-10°C-+60°C, operating temperature is 0°C-45°C
- Fully charge the battery before first use to maximize the battery life
- Recommend to recharge your power bank with a wall charger/adapter.
- For better performance, avoid recharging the power bank while your device is connected to it.
- Dispose of battery properly; ask local disposal facility for advice.
- Do not disassemble, damage, or incinerate the battery at any time.
- Please use the original accessories such as charging cable and adapter for better performance
WARRANTY
All products from the date of purchase are qualified for a limited-time warranty. For more warranty information, please visit: http://www.energizerpowerbanks.com
FCC ID: 2AU4P-BTS106
Diaspora, e the battery properly, seek for local disposal facility for advice.
Do not dispose of, disassemble, damage, or Incinerate the battery at all
times.
© 2021 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC, and related subsidiaries and are used under license by TennRich International Corp. All other brand names are trademarks of their respective owners. Neither TennRich International Corp. nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.
FCCWarningStatement
Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This limit redesign to provide reasons blepro section gains tharm full interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and use disaccord dance ththeinstructions,maycauseharmfulinterferencetoradio communications. However, there is no guaran teeth interference ence that will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the use rose our aged to try to correct hinter ferencebyon eormoreofth follow in-game sures: Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing two conditions:(1)Thisdevicemaynotcauseharmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.