WALI TC-W1 Dummy Fake Security CCTV Dome Camera Installation Guide
- June 13, 2024
- WALI
Table of Contents
TC-W1/TC-W2/TC-W4
Security Dummy Camera
INSTALLATION MANUAL
support@walielectric.com
TC-W1 Dummy Fake Security CCTV Dome Camera
CAUTION
- Powered by AAA battery only, ensure the correct battery polarity, wrong polarity may damage device. Please do not use power adapter.
- Device not installed and used in accordance with the installation manual may damage device and battery.
- Ensure camera housing properly tightened.
- Any changes or modifications in construction of this device will automatically void all warranty.
Supplied Part:
Step 1
Twist open the camera housing to reveal the battery compartment.
Step 2
Insert 2 x AAA batteries into battery compartment in the right polarity
(Battery not included).
Step 3
Put the battery compartment back to the camera housing and tighen.
Step 4
Put the bottom holes to designated wall/ceiling position and mark through the
hole with your pencil, drill the three holes on wall/ceiling. 
Step 5
Put provided Screw-[bl and Concrete Anchor-[ C (if necessary) into
three holes to mount.
Step 6
Adjust the best camera angle and rotate the circular knob mount bracket to
tighten for stability. 
TC-W1/TC-W2/TC-W4
Documents / Resources
| WALI
TC-W1 Dummy Fake Security CCTV Dome
Camera
[pdf] Installation Guide
TC-W1 Dummy Fake Security CCTV Dome Camera, TC-W1, Dummy Fake Security CCTV
Dome Camera, Fake Security CCTV Dome Camera, Security CCTV Dome Camera, CCTV
Dome Camera, Dome Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>