FORTIN Hyundai XG350 Remote Start and Alarm Systems Installation Guide

ADDENDUM – SUGGESTED WIRING CONFIGURATION

REGULAR INSTALLATION

Hyundai XG350 Remote Start and Alarm Systems

REV.: 20211021
GUIDE # 95921
VEHICLE……………. YEARS

Vehicle functions supported in this diagram (functional if equipped)
HYUNDAI

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
This guide may change without notice. See www.fortin.ca for latest version.

WIRING CONNECTION

PROGRAMMING PROCEDURE

| Press and hold Insert the programming button: the 4-Pin (Data-Link Connector) connector.
The LED will alternate between YELLOW and RED.
---|---
| Release the programming button when the LED is RED.
If the LED is not solid RED disconnect the 4 Pin connector (Data-Link Connector) and go back to step 1.

| Insert the required remaining connectors.
| Press and release the programming button 3 times (3x).
The RED LED will flash 2 times and pause.
| Turn the Ignition to the ON/RUN position.
The RED LED will flash rapidly 10x times.
Key bypass programmed.
| Turn the Ignition OFF.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming. Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Documents / Resources

| FORTIN Hyundai XG350 Remote Start and Alarm Systems [pdf] Installation Guide
Hyundai XG350 Remote Start and Alarm Systems, Hyundai XG350, Remote Start and Alarm Systems, Start and Alarm Systems, Alarm Systems, Systems
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>