FORTIN 2005 Hyundai XG350 Regular Key Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REV.: 20211021
GUIDE # 95911
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
2005 Hyundai XG350 Regular Key Remote Starters and Alarm Systems
VEHICLE
HYUNDAI
| 2002-2005 | 2001 | YEARS |
|---|---|---|
| • | • | Immobilizer bypass |
| • | • | Lock |
| • | • | Unlock |
| • | • | Arm |
| • | • | Disarm |
| • | • | Parking Light |
| • | • | Trunk (open) |
| • | • | Door Status |
| • | • | Trunk Status |
FIRMWARE VERSION
76.[60]
MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Parts required (Not included)
2x Relay
MANDATORY INSTALL
* HOOD PIN
HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE STARTED WITH THE HOOD OPEN.
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
WIRING CONNECTION
PROGRAMMING PROCEDURE
Press and hold the programming button:
Connect the 4-PIN Data-link harness (Black connector).
The LEDs will alternate between BLUE, YELLOW, RED and BLUE & RED
flashes.
Release the programming button when the RED LED is ON.
If the RED LED is not ON solid, disconnect the 4-Pin connector (Data-Link) and
go back to step 1.
Insert the required
remaining connectors.
Press and release the programming button 3 times (3x).
The RED LED will flash twice and pause.
Turn the key to the Ignition ON/RUN position.
The Red LED will flash 10 times rapidly.
The key bypass is programmed.
Turn the key to the OFF
position.
The LEDs will turn off.
**** The module is now programmed.
REMOTE STARTER FUNCTIONALITY
| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with the remote-starter remote or the OEM remote.
| Insert and Turn the key to the Ignition ON/RUN position.
| Press the brake pedal.
| The vehicle can now be put in to gear and driven.
www.fortinbypass.com
Module label
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797 ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>