FORTIN 2019 Nissan Rogue Push Button Remote Starters and Alarm Systems Installation Guide

REV.: 20211112
Guide # 77641
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION VEHICLE
YEARS NISSAN Rogue
Push-to-start
2014-2020

Vehicle functions supported in this diagram (functional if equipped)

BYPASS FIRMWARE VERSION
VERSION LOGICIELLE CONTOURNEMENT
72.[48]
NISSAN  MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Hood trigger (Output Status).

Program bypass option
(If equiped with OEM alarm):

before start and 4x after the starting cycle.
| The hazard will flash 4 times before start
and every 5 seconds after starting cycle.
A2| | Trunk Release

Program remote starter option:

Program remote starter option for R.S. OEM REMOTE STAND ALONE:

Parts required (Not included) 3x 1 Amp diode

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF

SECURITY STICKER
WARNING
Included
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

| FLASH LINK UPDATER
---|---
| FLASH LINK MANAGER SOFTWARE PROGRAMME
| Microsoft Windows Computer with Internet connection

OR

| FLASH LINK MOBILE
---|---
|  FLASH LINK MOBILE APP
| Smartphone Android or iOS with Internet connection
(Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

Press and hold the programming button:
Connect the 6-PIN Main harness (White connector).
The LEDs will alternate between BLUE, RED,YELLOW & BLUE/RED flashes.
Release the programming button when the LED is BLUE.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1. Insert the required remaining connectors.Do not press the brake pedal.
Press the START/STOP button once to turn ON the ignition.
Wait,
The BLUE LED will flash rapidly.

Do not press the brake pedal.
Press the Push-to-Start button once to turn on the ignition.
WAIT
The YELLOW LED will turn ON.
 The RED LED will flash once.

Press the Push-to-Start button once to turn off the ignition.
WAIT
The YELLOW LED will turn OFF.
Do not press the brake pedal.
Press the Push-to-Start button once to turn on the ignition.
WAIT
The YELLOW LED will turn ON.
The RED LED will flash once.
The Red and Yellow LEDs will start flashing alternatively.

Press the Push-to-Start button once to turn off the ignition.

Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included)

AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins (Data-Link) connector and after all the remaining connector.

The module is now programmed.

REMOTE STARTER / ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote
| Enter the vehicle with the SMART-KEY.
| DO NOT PRESS THE BRAKE PEDAL.
Press and release the Push-to-Start button once.
| Press the brake pedal. The vehicle can now be put in to gear and driven.
If the Smart-Key is not detected the vehicle will shut down.

www.fortinbypass.com
Module label

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
This guide may change without notice. See www.fortin.ca for latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797 ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>