FORTIN EVO-ALL Only Compatible With Automatic Transmission Vehicles Installation Guide

STAND ALONE & THAR-CHR5 INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

VEHICLE YEARS
JEEP
Wrangler
2007

EVO-ALL Only Compatible With Automatic Transmission Vehicles

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

Vehicle functions supported in this diagram (functional if equipped)

• Immobilizer bypass
• Lock
• Unlock
• Arm
• Disarm
• Parking Lights
• Tachometer
• Door Status
• Trunk Status
• Hand-Brake Status
• Foot-Brake Status
• OEM Remote monitoring

FIRMWARE VERSION VERSION LOGICIELLE 74.[39] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program bypass option
(If equiped with OEM alarm):

WIRE TO WIRE DIAGRAM
| 1x  7.5 Amp. use
1x Relay (Parking Lights)
THARNESS DIAGRAM
THARNESS THAR-CHR5| 1x THAR-CHR5
1x Relay (Parking Lights)

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11|
---|---

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

PARTS REQUIRED (NOT INCLUDED)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER SOFTWARE
| Microsoft Windows Computer with Internet connection

OR

| FLASH LINK MOBILE
---|---
|  FLASH LINK MOBILE APP
| Smartphone AndroId or iOS with Internet connection (provider charges may apply).

MANDATORY
HOOD PIN REMOTE START SAFETY OVERRIDE SWITCH

Part #: RSPB available, Sold separately.

Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATIO

Program bypass option
OEM Remote Stand Alone Remote Starter:

Program bypass option with oem remote:

Program bypass option with RF KIT antenna:

and select RF Kit

REMOTE STARTER FUNCTIONNALITY

| |
---|---|---
All doors must be closed.| Press the OEM remote’s Lock button 3x to
remote-start (or remote-stop) the vehicle.| The vehicle will START.

REMOTE STARTER DIAGNOSTICS

MODULE RED LED

before start
x5 flash :| Hood Open

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.

WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

AUTOMATIC TRANSMISSION WIRING CONNECTION

THAR-CHR5

PROGRAMMING PROCEDURE

| Press and hold the programming button:
Connect the 4-PIN Data-link harness (Black connector).
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
---|---
| Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 17.

| Insert the required remaining connectors.
| Turn the key to the Ignition ON/RUN position.
The BLUE LED will flash rapidly.
| Turn the key to the OFF position.
The BLUE LED will flash rapidly.
6 With OEM remote
Or
Without OEM remote
| Press the LOCK button on the vehicles OEM remote.
Press and release the programming button on the module once.
| The BLUE LED will turn off.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

REMOTE STARTER FUNCTIONALITY

| |
---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with the remote-starter
remote or the OEM remote.
| |
Insert and Turn the key to the Ignition ON/RUN position.| Press
the brake pedal.| The vehicle can now be put in to gear and driven.

Module label
www.fortinbypass.com

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797

ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE

This guide may change without notice. See www.fortin.ca for latest version.
REV.: 20211105
Guide # 103191

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>